Sony CDX-F5710 / CDX-F5710X Service Manual ▷ View online
5
CDX-F5710/F5710X
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
• LOCATION OF CONTROL
• CDX-F5710
• CDX-F5710X
6
Location of controls and basic operations
Main unit
Front panel removed
Card remote commander
RM-X153
RM-X153
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
DSO button 2
To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
The larger the number, the more enhanced
the effect.
B
SOURCE button
To power on/change the source (Radio/CD/
MD*
MD*
1
/AUX*
2
).
C
Volume control dial/SOUND button 9
To adjust volume (rotate); select sound items
(press).
(press).
D
GP
*
3
/PRESET +/–,
M
(+)/
m
(–)buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
skip groups continuously (press and hold).
E
Receptor for the card remote
commander
commander
F
LIST/CAT
*
4
button 9, 12
To list up.
OPEN
6
5
4
3
BBE
SHUF
REP
2
1
DSPL
MODE
EQ7
CDX-F5710
DSO
OFF
BBE MP
COLOR
PU
SH
DIA
L
SO
U
N
D
SO
UR
CE
GP/PRESET
EN
TE
R
M
EN
U
LIS
T
CA
T
SEEK
SEEK
1
2
3
4
5
6
8
7
9
0
qd
qs
qa
qf qg
qj
qh
RESET
qk
ql
w;
OFF
DSPL
REP
SHUF
MENU
SCRL
LIST/
CAT
SOURCE
SOUND
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
ENTER
2
6
qa
wd
qf
qf
qj
wf
qd
qs
qg
ws
wa
qh
4
7
G
Display window
H
OPEN button 5
To open the front panel.
I
COLOR button
To select one of 7 color settings for the LCD.
J
EQ7 (equalizer) button
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
K
MENU button
To enter menu.
L
SEEK –/+,
<
(
.
)/
,
(
>
) buttons
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
M
ENTER button
To complete a setting.
N
MODE button 8, 11
To select the radio band (FM/AM)/select the
unit*
unit*
5
.
O
DSPL (display) button 8, 10
To change display items.
P
Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD*
To receive stored stations (press); store
stations (press and hold).
CD/MD*
1
:
(1):
REP 8
(2):
SHUF 8
(5):
BBE MP
*
6
3
To activate the BBE MP function, set
“BBEMP-ON” during playback on this unit.
To cancel, set “BBEMP-OFF.”
“BBEMP-ON” during playback on this unit.
To cancel, set “BBEMP-OFF.”
Q
OFF button
To power off/stop the source.
R
RESET button 4
S Z
(eject) button 5
To eject the disc.
T
Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
commander have also different buttons/functions
from the unit.
wa
VOL (volume) +/– button
To adjust volume.
ws
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
wd
SOUND button 9
To select sound items.
wf
SCRL button 8
To scroll the display item.
*1
When an MD changer is connected.
*2
When an optional Sony portable device is
connected.
connected.
*3
When an MP3/ATRAC CD is played and a changer
is not connected. If the changer is connected, the
operation is different, see page 12.
is not connected. If the changer is connected, the
operation is different, see page 12.
*4
When the XM tuner is connected.
*5
When a CD/MD changer is connected.
*6
The unit only.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 14.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 14.
6
Location of controls and basic operations
Main unit
Front panel removed
Card remote commander
RM-X157
RM-X157
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
DSO button 2
To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
The larger the number, the more enhanced
the effect.
B
SOURCE button
To power on/change the source (Radio/CD/
MD*
MD*
1
/AUX*
2
).
C
Volume control dial/SOUND button 9
To adjust volume (rotate); select sound items
(press).
(press).
D
GP
*
3
/PRESET +/–,
M
(+)/
m
(–)buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
skip groups continuously (press and hold).
E
Receptor for the card remote
commander
commander
F
LIST button 9, 12
To list up.
OPEN
6
5
4
3
BBE
SHUF
REP
2
1
DSPL
MODE
EQ7
CDX-F5710
DSO
OFF
BBE MP
COLOR
PU
SH
DIA
L
SO
U
N
D
SO
UR
CE
GP/PRESET
EN
TE
R
M
EN
U
LIS
T
SEEK
SEEK
1
2
3
4
5
6
8
7
9
0
qd
qs
qa
qf qg
qj
qh
RESET
ql
w;
wa
OFF
DSPL
REP
SHUF
MENU
SCRL
LIST
SOURCE
SOUND
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
ENTER
2
6
qa
wf
qf
qf
qk
wg
qd
qs
qg
wd
ws
qh
4
7
G
Display window
H
OPEN button 5
To open the front panel.
I
COLOR button
To select one of 7 colour settings for the
LCD.
LCD.
J
EQ7 (equalizer) button
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
K
MENU button
To enter menu.
L
SEEK –/+,
<
(
.
)/
,
(
>
) buttons
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
M
ENTER button
To complete a setting.
N
MODE button 8, 11
To select the radio band (FM/AM)/select the
unit*
unit*
4
.
O
DSPL (display) button 8, 10
To change display items.
P
Frequency select switch (located on
the bottom of the unit)
the bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
supplied installation/connections manual.
Q
Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD*
To receive stored stations (press); store
stations (press and hold).
CD/MD*
1
:
(1):
REP 8
(2):
SHUF 8
(5):
BBE MP
*
5
2
To activate the BBE MP function, set
“BBEMP-ON” during playback on this unit.
To cancel, set “BBEMP-OFF.”
“BBEMP-ON” during playback on this unit.
To cancel, set “BBEMP-OFF.”
R
OFF button
To power off/stop the source.
S
RESET button 4
T Z
(eject) button 5
To eject the disc.
U
Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
commander have also different buttons/functions
from the unit.
ws
VOL (volume) +/– button
To adjust volume.
wd
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
wf
SOUND button
The same as (SOUND) on the unit.
wg
SCRL button 8
To scroll the display item.
*1
When an MD changer is connected.
*2
When an optional Sony portable device is
connected.
connected.
*3
When an MP3/ATRAC CD is played and a changer
is not connected. If the changer is connected, the
operation is different, see page 12.
is not connected. If the changer is connected, the
operation is different, see page 12.
*4
When a CD/MD changer is connected.
*5
The unit only.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 14.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 14.
6
CDX-F5710/F5710X
• CONNECTIONS
• CDX-F5710
• CDX-F5710X
AUDIO OUT
FRONT
AUDIO OUT
REAR
SUB OUT (MONO)
BUS AUDIO IN
BUS CONTROL IN
A
B
BUS AUDIO IN
BUS CONTROL IN
*
not supplied
non fourni
Source selector
*
Sélecteur de source
*
XA-C30
Connection example (2)
Notes (
2
-A)
•
Be sure to connect the ground lead before connecting the
amplifi er.
•
The alarm will only sound if the built-in amplifi er is used.
Tip (
2
-B- )
For connecting two or more CD/MD changers, the source
selector XA-C30 (optional) is necessary.
selector XA-C30 (optional) is necessary.
Exemple de raccordement (2)
Remarques (
2
-A)
•
Raccordez d’abord le câble de mise à la masse avant de
raccorder l’amplifi cateur.
•
L’alarme est émise uniquement lorsque l’amplifi cateur intégré
est utilisé.
Conseil (
2
-B- )
Dans le cas du raccordement de deux changeurs de CD/MD ou
plus, le sélecteur de source XA-C30 (en option) est requis.
plus, le sélecteur de source XA-C30 (en option) est requis.
AUDIO OUT
FRONT
AUDIO OUT
REAR
SUB OUT (MONO)
BUS AUDIO IN
BUS CONTROL IN
A
B
BUS AUDIO IN
BUS CONTROL IN
Source selector
*
Selector de fuente
*
CT
*
XA-C30
*
not supplied
no suministrado
CT
CT
Connection example (2)
Notes (
2
-A)
•
Be sure to connect the earth lead before connecting the
amplifi er.
•
The alarm will only sound if the built-in amplifi er is used.
Tip (
2
-B- )
For connecting two or more CD/MD changers, the source
selector XA-C30 (optional) is necessary.
selector XA-C30 (optional) is necessary.
Ejemplo de conexiones (2)
Notas (
2
-A)
•
Asegúrese de conectar primero el cable de conexión a masa
antes de realizar la conexión del amplifi cador.
•
La alarma sonará únicamente si se utiliza el amplifi cador
incorporado.
Sugerencia (
2
-B- )
Si desea conectar dos o más cambiadres de CD/MD, necesitará
el selector de fuente XA-C30 (opcional).
el selector de fuente XA-C30 (opcional).
7
CDX-F5710/F5710X
• CDX-F5710
L
R
2
4
5
6
7
1
3
AUDIO OUT
FRONT
BUS AUDIO IN
/AUX IN
*
2
BUS
CONTROL IN
REMOTE
IN
AUDIO OUT
REAR
SUB OUT (MONO)
AMP REM
Max. supply current 0.3 A
Courant max. fourni 0,3 A
Courant max. fourni 0,3 A
Fuse (10 A)
Fusible (10 A)
Fusible (10 A)
Blue/white striped
Rayé bleu/blanc
Rayé bleu/blanc
from car antenna
à partir de l’antenne de la voiture
à partir de l’antenne de la voiture
*
1
Red
Rouge
Rouge
Yellow
Jaune
Jaune
White
Blanc
Blanc
Green
Vert
Vert
Purple
Mauve
Mauve
White/black striped
Rayé blanc/noir
Rayé blanc/noir
Gray/black striped
Rayé gris/noir
Rayé gris/noir
Green/black striped
Rayé vert/noir
Rayé vert/noir
Gray
Gris
Gris
Left
Gauche
Gauche
Right
Droit
Droit
Left
Gauche
Gauche
Right
Droit
Droit
ANT REM
Black
Noir
Noir
Blue
Bleu
Bleu
Max. supply current 0.1 A
Courant max. fourni 0,1 A
Courant max. fourni 0,1 A
Purple/black striped
Rayé mauve/noir
Rayé mauve/noir
*
6
*
1
RCA pin cord (not supplied)
*
2
Be sure to match the color-
coded cord for audio to the
appropriate jacks from the unit.
If you connect an optional CD/
MD unit, you cannot use AUX
IN terminal.
appropriate jacks from the unit.
If you connect an optional CD/
MD unit, you cannot use AUX
IN terminal.
*
3
Auxiliary optional equipment
such as portable DVD player
(not supplied)
(not supplied)
*
4
Supplied with the auxiliary
equipment
*
5
Supplied with XA-C30
*
6
Insert with the cord upwards.
*
1
Cordon à broche RCA (non
fourni)
*
2
Veillez à faire correspondre le
code couleur audio aux fi ches
de l’appareil. Si vous raccordez
un appareil CD ou MD en
option, vous ne pouvez pas
utiliser la borne AUX IN.
de l’appareil. Si vous raccordez
un appareil CD ou MD en
option, vous ne pouvez pas
utiliser la borne AUX IN.
*
3
Appareil auxiliaire en option,
par exemple un lecteur de DVD
portable (non fourni)
portable (non fourni)
*
4
Fourni avec l’appareil auxiliaire
*
5
Fourni avec le XA-C30
*
6
Insérez avec le câble vers le
bas.
bas.
*
1
ATT
ILLUMINATION
Orange/white striped
Rayé orange/blanc
Rayé orange/blanc
Light blue
Bleu ciel
Bleu ciel
Source selector
(not supplied)
Sélecteur de source
(non fourni)
XA-C30
Supplied with the CD/MD changer
Fourni avec le changeur de CD/MD
Fourni avec le changeur de CD/MD
*
3
*
4
*
5
2
Connection diagram (3)
1
To a metal surface of the car
First connect the black ground lead, then connect the
orange/white striped, yellow, and red power input leads.
orange/white striped, yellow, and red power input leads.
2
To the power antenna control lead or power
supply lead of antenna booster amplifi er
supply lead of antenna booster amplifi er
Notes
•
•
It is not necessary to connect this lead if there is no power
antenna or antenna booster, or with a manually-operated
telescopic antenna.
telescopic antenna.
•
When your car has a built-in FM/AM antenna in the rear/
side glass, see “Notes on the control and power supply
leads.”
leads.”
3
To AMP REMOTE IN of an optional power
amplifi er
amplifi er
This connection is only for amplifi ers. Connecting any other
system may damage the unit.
system may damage the unit.
4
To the interface cable of a car telephone
5
To a car’s illumination signal
Be sure to connect the black ground lead to a metal surface
of the car fi rst.
of the car fi rst.
6
To the +12 V power terminal which is
energized in the accessory position of the
ignition key switch
energized in the accessory position of the
ignition key switch
Notes
•
•
If there is no accessory position, connect to the +12 V
power (battery) terminal which is energized at all times.
Be sure to connect the black ground lead to a metal
surface of the car fi rst.
•
When your car has a built-in FM/AM antenna in the rear/
side glass, see “Notes on the control and power supply
leads.”
leads.”
7
To the +12 V power terminal which is
energized at all times
energized at all times
Be sure to connect the black ground lead to a metal surface
of the car fi rst.
of the car fi rst.
Notes on the control and power supply leads
•
•
The power antenna control lead (blue) supplies +12 V DC
when you turn on the tuner.
•
When your car has built-in FM/AM antenna in the rear/side
glass, connect the power antenna control lead (blue) or the
accessory power input lead (red) to the power terminal of the
existing antenna booster. For details, consult your dealer.
accessory power input lead (red) to the power terminal of the
existing antenna booster. For details, consult your dealer.
•
A power antenna without a relay box cannot be used with this
unit.
Memory hold connection
When the yellow power input lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
When the yellow power input lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
Notes on speaker connection
•
•
Before connecting the speakers, turn the unit off.
•
Use speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
•
Do not connect the speaker terminals to the car chassis, or
connect the terminals of the right speakers with those of the
left speaker.
left speaker.
•
Do not connect the ground lead of this unit to the negative (–)
terminal of the speaker.
•
Do not attempt to connect the speakers in parallel.
•
Connect only passive speakers. Connecting active speakers
(with built-in amplifi ers) to the speaker terminals may damage
the unit.
the unit.
•
To avoid a malfunction, do not use the built-in speaker leads
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
lead for the right and left speakers.
•
Do not connect the unit’s speaker leads to each other.
Note on connection
If speaker and amplifi er are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifi er are connected correctly.
If speaker and amplifi er are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifi er are connected correctly.
Schéma de raccordement (3)
1
À un point métallique de la voiture
Branchez d’abord le fi l de masse noir et, ensuite, les fi ls
d’entrée d’alimentation rayé orange/blanc, jaune, et rouge.
d’entrée d’alimentation rayé orange/blanc, jaune, et rouge.
2
Vers le câble de commande d’antenne
électrique ou le câble d’alimentation de
l’amplifi cateur d’antenne
électrique ou le câble d’alimentation de
l’amplifi cateur d’antenne
Remarques
•
•
Il n’est pas nécessaire de raccorder ce câble s’il n'y a pas
d’antenne électrique ni d’amplifi cateur d’antenne, ou avec
une antenne télescopique manuelle.
une antenne télescopique manuelle.
•
Si votre voiture est équipée d’une antenne FM/AM
intégrée dans la vitre arrière/latérale, voir « Remarques
sur les câbles de commande et d’alimentation ».
sur les câbles de commande et d’alimentation ».
3
Au niveau de AMP REMOTE IN de
l’amplifi cateur de puissance en option
l’amplifi cateur de puissance en option
Ce raccordement s’applique uniquement aux amplifi cateurs.
Le branchement de tout autre système risque
d’endommager l’appareil.
Le branchement de tout autre système risque
d’endommager l’appareil.
4
Vers le cordon de liaison d’un téléphone de
voiture
voiture
5
Vers le connecteur du signal d’éclairage de
la voiture
la voiture
Raccordez d’abord le câble de mise à la masse noir à un
point métallique du véhicule.
point métallique du véhicule.
6
À la borne +12 V qui est alimentée quand la
clé de contact est sur la position accessoires
clé de contact est sur la position accessoires
Remarques
•
•
S’il n’y a pas de position accessoires, raccordez la borne
d’alimentation (batterie) +12 V qui est alimentée en
permanence. Raccordez d’abord le câble de mise à la
masse noir à un point métallique du véhicule.
permanence. Raccordez d’abord le câble de mise à la
masse noir à un point métallique du véhicule.
•
Si votre voiture est équipée d’une antenne FM/AM
intégrée dans la vitre arrière/latérale, voir « Remarques
sur les câbles de commande et d’alimentation ».
sur les câbles de commande et d’alimentation ».
7
À la borne +12 V qui est alimentée en
permanence
permanence
Raccordez d’abord le câble de mise à la masse noir à un
point métallique du véhicule.
point métallique du véhicule.
Remarques sur les c‚b les de commande et díalimentation
•
•
Le câble de commande d’antenne électrique (bleu) fournit une
alimentation de + 12 V CC lorsque vous mettez la radio sous
tension.
tension.
•
Lorsque votre voiture est équipée d’une antenne FM/AM
intégrée dans la vitre arrière/latérale, raccordez le câble de
commande d’antenne
commande d’antenne
électrique (bleu) ou l’entrée d’alimentation
des accessoires (rouge) à la borne d’alimentation de
l’amplifi cateur d’antenne
l’amplifi cateur d’antenne
existant. Pour plus de détails, consultez
votre détaillant.
•
Une antenne électrique sans boîtier de relais ne peut pas être
utilisée avec cet appareil.
Raccordement pour la conservation de la mémoire
Lorsque le câble d’entrée d’alimentation jaune est raccordé, le
circuit de la mémoire est alimenté en permanence même si la clé
de contact est sur la position d’arrêt.
Lorsque le câble d’entrée d’alimentation jaune est raccordé, le
circuit de la mémoire est alimenté en permanence même si la clé
de contact est sur la position d’arrêt.
Remarques sur le raccordement des haut-parleurs
•
•
Avant de raccorder les haut-parleurs, mettez l’appareil hors
tension.
•
Utilisez des haut-parleurs ayant une impédance de 4 à 8 ohms
avec une capacité électrique adéquate pour éviter de les
endommager.
endommager.
•
Ne raccordez pas les bornes du système de haut-parleurs au
châssis de la voiture et ne raccordez pas les bornes des haut-
parleurs droit à celles du haut-parleur gauche.
parleurs droit à celles du haut-parleur gauche.
•
Ne raccordez pas le câble de mise à la masse de cet appareil
à la borne négative (–) du haut-parleur.
•
N’essayez pas de raccorder les haut-parleurs en parallèle.
•
Raccordez uniquement des haut-parleurs passifs. Le
raccordement de haut-parleurs actifs (avec amplifi cateurs intégrés)
aux bornes des haut-parleurs peut endommager l’appareil.
aux bornes des haut-parleurs peut endommager l’appareil.
•
Pour éviter tout dysfonctionnement, n’utilisez pas les câbles
des haut-parleurs intégrés installés dans votre voiture si
l’appareil partage un câble négatif commun (–) pour les haut-
parleurs droit et gauche.
l’appareil partage un câble négatif commun (–) pour les haut-
parleurs droit et gauche.
•
Ne raccordez pas entre eux les cordons des haut-parleurs de
l’appareil.
Remarque sur le raccordement
Si les haut-parleurs et l’amplifi cateur ne sont pas raccordés
correctement, le message « FAILURE » s’affi che. Dans ce cas,
assurez-vous que les haut-parleurs et l’amplifi cateur sont bien
raccordés.
Si les haut-parleurs et l’amplifi cateur ne sont pas raccordés
correctement, le message « FAILURE » s’affi che. Dans ce cas,
assurez-vous que les haut-parleurs et l’amplifi cateur sont bien
raccordés.
8
CDX-F5710/F5710X
• CDX-F5710X
L
R
2
2
4
5
6
7
1
3
AUDIO OUT
FRONT
BUS AUDIO IN
/AUX IN
*
2
BUS
CONTROL IN
REMOTE
IN
AUDIO OUT
REAR
SUB OUT (MONO)
*
1
RCA pin cord (not supplied)
*
2
Be sure to match the colour-coded
cord for audio to the appropriate
jacks from the unit. If you connect an
optional CD/MD changer, you cannot
use AUX IN terminal.
jacks from the unit. If you connect an
optional CD/MD changer, you cannot
use AUX IN terminal.
*
3
Auxiliary optional equipment such as
portable DVD player (not supplied)
*
4
Supplied with the auxiliary equipment
*
5
Supplied with XA-C30
*
6
Insert with the cord upwards.
*
1
Cable con terminales RCA
(no suministrado)
*
2
Asegúrese de hacer coincidir el
código codifi cado con colores para
audio con las tomas apropiadas de
la unidad. Si conecta una unidad de
CD/MD opcional, no podrá utilizar el
terminal AUX IN.
audio con las tomas apropiadas de
la unidad. Si conecta una unidad de
CD/MD opcional, no podrá utilizar el
terminal AUX IN.
*
3
Equipo opcional auxiliar como un
reproductor de DVD portátil (no
suministrado)
suministrado)
*
4
Suministrado con el equipo auxiliar
*
5
Suministrado con el XA-C30
*
6
Insertar con el cable hacia arriba.
*
1
CT###############.
*
2
CT###############
*
3
CT###############
*
4
CT###############
*
5
CT###############
*
6
CT###############.
AMP REM
Max. supply current 0.3 A
Corriente máx. de alimentación de 0,3 A
CT
Corriente máx. de alimentación de 0,3 A
CT
Fuse (10 A)
Fusible (10 A)
CT
Fusible (10 A)
CT
Blue/white striped
Con rayas azules y blancas
CT
Con rayas azules y blancas
CT
from car aerial
desde la antena del automóvil
CT
desde la antena del automóvil
CT
Red
Rojo
CT
Rojo
CT
Yellow
Amarillo
CT
Amarillo
CT
White
Blanco
CT
Blanco
CT
Green
Verde
CT
Verde
CT
Purple
Morado
CT
Morado
CT
White/black striped
Con rayas blancas y negras
CT
Con rayas blancas y negras
CT
Grey/black striped
Con rayas grises y negras
CT
Con rayas grises y negras
CT
Green/black striped
Con rayas verdes y negras
CT
Con rayas verdes y negras
CT
Grey
Gris
CT
Gris
CT
Left
Izquierdo
CT
Izquierdo
CT
Right
Derecho
CT
Derecho
CT
Left
Izquierdo
CT
Izquierdo
CT
Right
Derecho
CT
Derecho
CT
ANT REM
Black
Negro
CT
Negro
CT
Blue
Azul
CT
Azul
CT
Max. supply current 0.1 A
Corriente máx. de alimentación de 0,1 A
CT
*
3
Purple/black striped
Con rayas moradas y negras
CT
Con rayas moradas y negras
CT
*
1
Source selector
(not supplied)
Selector de fuente
(no suminidtrado)
CT
XA-C30
Supplied with the CD/MD changer
Suministrado con el cambiador de CD/MD
CT
Suministrado con el cambiador de CD/MD
CT
*
1
ATT
ILLUMINATION
Orange/white striped
Con rayas naranjas y blancas
CT
Con rayas naranjas y blancas
CT
Light blue
Azul celeste
CT
Azul celeste
CT
*
5
*
6
*
4
Connection diagram (3)
1
To a metal surface of the car
First connect the black earth lead, then connect the orange/
white stripped, yellow, and red power input leads.
white stripped, yellow, and red power input leads.
2
To the power aerial control lead or power
supply lead of aerial booster amplifi er
supply lead of aerial booster amplifi er
Notes
•
•
It is not necessary to connect this lead if there is no power
aerial or aerial booster, or with a manually-operated
telescopic aerial.
telescopic aerial.
•
When your car has a built-in FM/AM aerial in the rear/side
glass, see “Notes on the control and power supply leads.”
3
To AMP REMOTE IN of an optional power
amplifi er
amplifi er
This connection is only for amplifi ers. Connecting any other
system may damage the unit.
system may damage the unit.
4
To the interface cable of a car telephone
5
To a car’s illumination signal
Be sure to connect the black earth lead to a metal surface
of the car fi rst.
of the car fi rst.
6
To the +12 V power terminal which is
energized in the accessory position of the
ignition key switch
energized in the accessory position of the
ignition key switch
Notes
•
•
If there is no accessory position, connect to the +12 V
power (battery) terminal which is energized at all times.
Be sure to connect the black earth lead to a metal surface
of the car fi rst.
•
When your car has a built-in FM/AM aerial in the rear/side
glass, see “Notes on the control and power supply leads.”
7
To the +12 V power terminal which is
energized at all times
energized at all times
Be sure to connect the black earth lead to a metal surface
of the car fi rst.
of the car fi rst.
Notes on the control and power supply leads
•
•
The power aerial control lead (blue) supplies +12 V DC when
you turn on the tuner.
•
When your car has built-in FM/AM aerial in the rear/side glass,
connect the power aerial control lead (blue) or the accessory
power input lead (red) to the power terminal of the existing
aerial booster. For details, consult your dealer.
power input lead (red) to the power terminal of the existing
aerial booster. For details, consult your dealer.
•
A power aerial without a relay box cannot be used with this
unit.
Memory hold connection
When the yellow power input lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
When the yellow power input lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
Notes on speaker connection
•
•
Before connecting the speakers, turn the unit off.
•
Use speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
•
Do not connect the speaker terminals to the car chassis, or
connect the terminals of the right speakers with those of the
left speaker.
left speaker.
•
Do not connect the earth lead of this unit to the negative (–)
terminal of the speaker.
•
Do not attempt to connect the speakers in parallel.
•
Connect only passive speakers. Connecting active speakers
(with built-in amplifi ers) to the speaker terminals may damage
the unit.
the unit.
•
To avoid a malfunction, do not use the built-in speaker leads
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
lead for the right and left speakers.
•
Do not connect the unit’s speaker leads to each other.
Note on connection
If speaker and amplifi er are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifi er are connected correctly.
If speaker and amplifi er are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifi er are connected correctly.
Diagrama de conexión (3)
1
A una superfi cie metálica del automóvil
Conecte primero el cable de conexión a masa negro, y después
los cables con rayas naranjas y blancas, amarillo, y rojo de
entrada de alimentación.
los cables con rayas naranjas y blancas, amarillo, y rojo de
entrada de alimentación.
2
Al cable de control de la antena motorizada
o al cable de fuente de alimentación del
amplifi cador de señal de la antena
o al cable de fuente de alimentación del
amplifi cador de señal de la antena
Notas
•
Si no se dispone de antena motorizada ni de amplifi cador
de antena, o se utiliza una antena telescópica accionada
manualmente, no será necesario conectar este cable.
manualmente, no será necesario conectar este cable.
•
Si el automóvil incorpora una antena de FM/AM en el cristal
trasero o lateral, consulte “Notas sobre los cables de control y
de fuente de alimentación”.
de fuente de alimentación”.
3
A AMP REMOTE IN de un amplifi cador de
potencia opcional
potencia opcional
Esta conexión es sólo para amplifi cadores. La conexión de
cualquier otro sistema puede dañar la unidad.
cualquier otro sistema puede dañar la unidad.
4
Al cable de interfaz de un teléfono para
automóvil
automóvil
5
A una señal de iluminación del automóvil
Asegúrese de conectar primero el cable de toma a masa negro
a una superfi cie metálica del automóvil.
a una superfi cie metálica del automóvil.
6
Al terminal de alimentación de +12 V que
recibe energía en la posición de accesorio del
interruptor de la llave de encendido
recibe energía en la posición de accesorio del
interruptor de la llave de encendido
Notas
•
Si no hay posición de accesorio, conéctelo al terminal de
alimentación (batería) de +12 V que recibe energía sin
interrupción.
Asegúrese de conectar primero el cable de conexión a masa
negro a una superfi cie metálica del automóvil.
interrupción.
Asegúrese de conectar primero el cable de conexión a masa
negro a una superfi cie metálica del automóvil.
•
Si el automóvil incorpora una antena de FM/AM en el cristal
trasero o lateral, consulte “Notas sobre los cables de control y
de fuente de alimentación”.
de fuente de alimentación”.
7
Al terminal de alimentación de +12 V que recibe
energía sin interrupción
energía sin interrupción
Asegúrese de conectar primero el cable de conexión a masa
negro a una superfi cie metálica del automóvil.
negro a una superfi cie metálica del automóvil.
Notas sobre los cables de control y de fuente de alimentación
•
El cable de control de la antena motorizada (azul) suministrará cc
de + 12V cuando conecte la alimentación del sintonizador.
•
Si el automóvil dispone de una antena de FM/AM incorporada en
el cristal trasero o lateral, conecte el cable de control de antena
motorizada (azul) o el cable de entrada de alimentación auxiliar
(rojo) al terminal de alimentación del amplifi cador de antena
existente. Para obtener más información, consulte a su distribuidor.
motorizada (azul) o el cable de entrada de alimentación auxiliar
(rojo) al terminal de alimentación del amplifi cador de antena
existente. Para obtener más información, consulte a su distribuidor.
•
Con esta unidad no es posible utilizar una antena motorizada sin
caja de relé.
Conexión para protección de la memoria
Si conecta el cable de entrada de alimentación amarillo, el circuito
de la memoria recibirá siempre alimentación, aunque apague la llave
de encendido.
Si conecta el cable de entrada de alimentación amarillo, el circuito
de la memoria recibirá siempre alimentación, aunque apague la llave
de encendido.
Notas sobre la conexión de los altavoces
•
Antes de conectar los altavoces, desconecte la alimentación de la
unidad.
•
Utilice altavoces con una impedancia de 4 a 8 con la capacidad
de potencia adecuada para evitar que se dañen.
•
No conecte los terminales de altavoz al chasis del automóvil, ni
conecte los terminales del altavoz derecho con los del izquierdo.
•
No conecte el cable de conexión a masa de esta unidad al
terminal negativo (–) del altavoz.
•
No intente conectar los altavoces en paralelo.
•
Conecte solamente altavoces pasivos. Si conecta altavoces
activos (con amplifi cadores incorporados) a los terminales de
altavoz, puede dañar la unidad.
altavoz, puede dañar la unidad.
•
Para evitar fallos de funcionamiento, no utilice los cables de
altavoz incorporados instalados en el automóvil si su unidad
comparte un cable negativo común (–) para los altavoces derecho
e izquierdo.
comparte un cable negativo común (–) para los altavoces derecho
e izquierdo.
•
No conecte los cables de altavoz de la unidad entre sí.
Nota sobre la conexión
Si el altavoz y el amplifi cador no están conectados correctamente,
aparecerá “FAILURE” en la pantalla. Si es así, compruebe la
conexión de ambos dispositivos.
Si el altavoz y el amplifi cador no están conectados correctamente,
aparecerá “FAILURE” en la pantalla. Si es así, compruebe la
conexión de ambos dispositivos.
Click on the first or last page to see other CDX-F5710 / CDX-F5710X service manuals if exist.