DOWNLOAD Sony CDX-605 / XDC-40 Service Manual ↓ Size: 7.65 MB | Pages: 59 in PDF or view online for FREE

Model
CDX-605 XDC-40
Pages
59
Size
7.65 MB
Type
PDF
Document
Service Manual
Brand
Device
Car Audio
File
cdx-605-xdc-40.pdf
Date

Sony CDX-605 / XDC-40 Service Manual ▷ View online

COMPACT DISC CHANGER
AEP Model
UK Model
E Model
SERVICE MANUAL
CDX-605
Model Name Using Similar Mechanism
NEW
CD Drive Mechanism Type
MG-250A-137
Optical Pick-up Name
KSS-521A/J2RP
SPECIFICATIONS
System
Compact disc digital audio system
Laser Diode Properties
Material: GaAlAs
Wavelength: 780 nm
Emission Duration: Continuous
Laser out-put Power: Less than 44.6 
µ
W*
* This output is the value measured at a distance of 200
mm from the objective lens surface on the Optical Pick-
up Block.
Frequency response 10-20,000 Hz
Wow and flutter
Below the measurable limit
Signal-to-noise ratio 94 dB
Outputs
BUS control output (8 PIN)
Analog audio output (RCA PIN)
Current drain
800 mA (during CD playback)
800 mA (during loading or ejecting a disc)
Operating temperature
–10 ºC to +55 ºC
Dimensions
Approx. 262 
×
 90 
×
 181.5 mm
(10 
3
/
8
 
×
 3 
5
/
8
 
×
 7 
1
/
4
 in.) (w/h/d)
not incl. projecting parts and controls
Mass
Approx. 2.1 kg (4 lb. 14 oz.)
Power requirement
12 V DC car battery
(negative ground)
Supplied accessories Disc magazine (1)
Parts for installation and connections (1 set)
Design and specifications subject to change without notice.
Ver 1.1 2001.08
9-925-525-12
Sony Corporation
2001H0500-1
e Vehicle Company
C
 2001.8
Shinagawa Tec Service Manual Production Group
– 2 –
TABLE  OF  CONTENTS
1.
GENERAL
Installation .........................................................................
4
Connections .......................................................................
5
2.
DISASSEMBLY
............................................................
7
3.
ELECTRICAL  ADJUSTMENTS
........................... 13
4.
DIAGRAMS
4-1. Printed Wiring Board – RF Section – ................................ 15
4-2. Schematic Diagram – RF Section – ................................... 17
4-3. Schematic Diagram – MAIN Section – ............................. 21
4-4. Printed Wiring Board – MAIN Section – .......................... 25
4-5. IC Pin Function Description .............................................. 31
5.
EXPLODED VIEWS
................................................... 33
6.
ELECTRICAL PARTS LIST
.................................... 38
The laser diode in the optical pick-up block may suffer electrostatic
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
NOTES  ON  HANDLING  THE  OPTICAL  PICK-UP
BLOCK  OR  BASE  UNIT
Laser Diode Properites
• Material: GaAlAs
• Wavelength: 780 nm
• Emission Duration: continuous
• Laser Output Power: less than 44.6 µW*
* This output is the value measured at a distance of 200 mm
from the objective lens surface on the Optical Pick-up Block.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
Flexible Circuit Board Repairing
Keep the temperature of the soldering iron around 270 ˚C during
repairing.
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering or
unsoldering.
Notes on chip component replacement
Never reuse a disconnected chip component.
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
SERVICING  NOTES
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
!
  OR  DOTTED
LINE  WITH  MARK  
!
  ON  THE  SCHEMATIC  DIAGRAMS
AND  IN  THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE
OPERATION.  REPLACE  THESE  COMPONENTS  WITH
SONY  PARTS  WHOSE  PART  NUMBERS  APPEAR  AS
SHOWN  IN  THIS  MANUAL  OR  IN  SUPPLEMENTS  PUB-
LISHED  BY  SONY.
– 3 –
DISC  MAGAZINE  GETTING  OUT  PROCEDURE  ON  THE
POWER  SUPPLY  IS  OFF
Remove the CASE (LOWER) assembly beforehand
1) Press the lever (stop) assy to arrow direction.
2) Removal the magazine assy.
Note: Take out the magazine only when the tray is completely within
the magazine. If the disk or tray is sticking out, turn on the
power and eject the magazine.
Lever (stop) ass’y
Magazine ass’y
SECTION  1
GENERAL
This section is extracted from
instruction manual.
– 4 –
– 5 –
Page of 59
Display

Sony CDX-605 / XDC-40 Service Manual ▷ Download

  • DOWNLOAD Sony CDX-605 / XDC-40 Service Manual ↓ Size: 7.65 MB | Pages: 59 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony CDX-605 / XDC-40 in PDF for free, which will help you to disassemble, recover, fix and repair Sony CDX-605 / XDC-40 Car Audio. Information contained in Sony CDX-605 / XDC-40 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.