Sony CDX-3183 Service Manual ▷ View online
4-2. CIRCUIT BOARDS LOCATION
tuner unit
(TU01)
(TU01)
DISC IN SW board
DISPLAY board
LOAD SW board
SERVO board
MAIN board
LIMIT SW board
SUB board
• Waveforms
(MODE:PLAY)
1
2
3
4
5
6
7
Approx. 620mVp-p
IC2
1
(FEO)
0V
IC2
#¡
(RFO)
1.2Vp-p
Approx. 200mVp-p
IC2
$™
(TEO)
0V
IC1
3
(MDP)
2.6Vp-p
7.6
µ
sec
IC1
@º
(LRCK)
5.8Vp-p
22.7
µ
sec
IC1
@™
(BCK)
5.7Vp-p
474nsec
16.89MHz
IC1
#¢
(XTAI)
3.2Vp-p
Note on Schematic Diagram:
• All capacitors are in
• All capacitors are in
µ
F unless otherwise noted. pF:
µµ
F
50 WV or less are not indicated except for electrolytics
and tantalums.
and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
Note: The components identified by mark
!
or dotted line
with mark
!
are critical for safety.
Replace only with part number specified.
•
U
: B+ Line.
•
H
: adjustment for repair.
• Power voltage is dc 14.4V and fed with regulated dc power
supply from ACC and BATT cords.
• Voltage and waveforms are dc with respect to ground
under no-signal conditions.
no mark : CD PLAY
no mark : CD PLAY
∗
: Impossible to measure
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal production
tolerances.
tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production
tolerances.
tolerances.
• Circled numbers refer to waveforms.
• Signal path.
• Signal path.
J
: CD
– 21 –
– 22 –
4-3. PRINTED WIRING BOARDS — CD MECHANISM SECTION —
CDX-3183
Ref. No.
Location
IC1
D-3
IC2
E-6
IC3
B-3
Q1
F-6
Q2
F-7
• Semiconductor
Location
Note:
• X
: parts extracted from the component side.
• Y
: parts extracted from the conductor side.
• b
: Pattern from the side which enables seeing.
– 23 –
– 24 –
(Page 32)
4-4. SCHEMATIC DIAGRAM — CD MECHANISM SECTION — • Refer to page 22 for Waveforms and Note and page 37 for IC Block Diagrams.
CDX-3183
– 25 –
– 26 –
(Page 33)
CDX-3183
4-5. PRINTED WIRING BOARD — DISPLAY SECTION —
Note:
• b
: Pattern from the side which enables seeing.
(The other layer’s patterns are not indicated.)
Caution:
Pattern face side: Parts on the pattern face side seen from the
(Side B)
Pattern face side: Parts on the pattern face side seen from the
(Side B)
pattern face are indicated.
Parts face side:
Parts on the parts face side seen from the
(Side A)
parts face are indicated.
• Semiconductor Location
Ref. No.
Location
(D851)
B-10
(D852)
B-11
(D853)
B-10
(D854)
B-10
D861
B-12
D862
A-13
D863
B-13
D864
C-5
D865
C-4
D866
C-2
D867
B-4
D868
C-9
Ref. No.
Location
D869
C-8
D870
C-7
D871
C-12
D872
C-11
D873
C-3
D874
C-2
D875
B-3
D876
B-2
D877
B-1
D878
A-1
(IC851)
B-7
( ) : SIDE B
– 27 –
– 28 –
(Page 31)
Click on the first or last page to see other CDX-3183 service manuals if exist.