Sony ZS-X10 Service Manual ▷ View online
ZS-X10
9
3-6. CD BLOCK SECTION
3-7. CD LID SUB ASSY
1
tension coil spring (CD)
2
four screws (B2.6)
3
CD block section
5
damper
3
spring (CD)
6
Remove two bosses.
4
screw (B3)
7
CD lid sub assy
1
two screws (B3)
2
CD lid bracket
ZS-X10
10
3-8. CABINET FRONT (L)/(R) ASSY
3-9. CABINET FRONT (L) SUB ASSY
3
screw (B3)
4
cabinet front (R) assy
1
rubber (speaker)
5
rubber (speaker)
2
two screws
(B3)
(B3)
6
screw (B3)
8
screw (B3)
7
screw (B3)
9
cabinet front (L) assy
1
three screws
(B3)
(B3)
4
four screws
(B3)
(B3)
8
two screws
(B3)
(B3)
6
two screws
(B3)
(B3)
9
bracket (L) speaker
2
three screws
(B3)
(B3)
3
speaker box (L)
5
passive speaker (8cm) (SP3) (Lch)
0
speaker (8cm)
(SP2) (Lch)
(SP2) (Lch)
qa
cabinet front (L) sub assy
7
bracket (SP B) (L)
ZS-X10
11
3-10. CABINET FRONT (R) SUB ASSY
1
three screws
(B3)
(B3)
4
four screws
(B3)
(B3)
8
two screws
(B3)
(B3)
9
speaker bracket (R)
2
three screws
(B3)
(B3)
3
speaker box (R)
5
passive speaker (8cm) (SP4) (Rch)
0
speaker (8cm)
(SP1) (Rch)
(SP1) (Rch)
qa
cabinet front (R) sub assy
6
two screws
(B3)
(B3)
7
bracket (SP B) (R)
3-11. OPTICAL PICK-UP (KSS-213C)
4
flexible flat cable (16 core)
1
CD cover
2
gear (A)
3
sled shaft
5
optical pick-up
(KSS-213C)
(KSS-213C)
12
ZS-X10
SECTION 4
TEST MODE
CD TEST MODE
procedure:
1. Insert the disc (YEDS-18) (Part No. 3-702-101-01) (CD) or
(TCD-W082L) (Part No. J-2502-063-2) (CD-RW).
2. Press the [POWER] button to turn the power on. (TOC read
ended)
3. Set the test mode by momentarily shorting both of TAP (TEST-
A) on the LCD board. (The message “88” is displayed on the
liquid crystal display)
liquid crystal display)
4. To release the test mode, press the [POWER] button to turn the
power off.
LCD TEST MODE
procedure:
1. Press the [POWER] button to turn the power on.
2. Set the test mode by momentarily shorting both of TAP (TEST-
2. Set the test mode by momentarily shorting both of TAP (TEST-
B) on the LCD board.
LCD DISPLAY
3. It repeats until any button is pressed.
Connecting Location:
– PLAY BOARD (Conductor Side) –
TP
(TEST A)
TP
(TEST B)
1
All lighting (4 seconds)
r
2
COM0 lighting (2 seconds)
r
3
COM1 lighting (2 seconds)
r
4
COM2 lighting (2 seconds)
r
5
COM3 lighting (2 seconds)
t
Click on the first or last page to see other ZS-X10 service manuals if exist.