Sony ZS-SAT1 Service Manual ▷ View online
5
ZS-SAT1
Using the display
You can check information about the CD using the
display.
display.
To check the total track number and
playing time of the CD
playing time of the CD
Press Ą ȫ to stop the CD playback.
Total track number
Total playing time
To check the remaining time
Press DISPLAY Ȭ on the unit while playing a CD. The
display changes as follows:
display changes as follows:
The current track number and playing time
Ô
The current track number and the remaining
time of the current track*
time of the current track*
The number of tracks left and the time
remaining on the CD
remaining on the CD
* For a track whose number is more than 20, the remaining time
appears as “− − : − −” in the display.
Playing tracks repeatedly
(Repeat Play)
You can play tracks repeatedly in normal, Shuffle or
Program play modes.
Program play modes.
1
Press CD ȳ.
“CD” appears in the display.
“CD” appears in the display.
2
Proceed as follows.
To repeat
Do this
A single track 1 Press REPEAT ȭ until “
1” appears.
2 Press ù
ˎ
Ã
or ß
ˎ
Ñ
(Ã or Ñon
the remote) ȯ to select the track that you want
to repeat.
3 Press à ȫ.
All tracks on
the CD
1 Press REPEAT ȭ repeatedly until “
”
appears.
2 Press à ȫ.
Tracks in
random order
1 Press MODE Ȯ repeatedly until “SHUF”
appears, and then press REPEAT ȭ to show “
”
2 Press à ȫ.
Programed
tracks
1 Press MODE Ȯ repeatedly until “PGM”
appears, and then press REPEAT ȭ to show
“
”
2 Program tracks (see step 3 of “Creating your
own program”).
3 Press à ȫ.
On the remote
ˎ
To select the CD function, press FUNCTION Ⱦ
repeatedly until “CD” appears in the display.
ˎ
To select the track number, press the number buttons
ȿ
and then ENTER ȯ.
To cancel Repeat Play
Press REPEAT ȭ until “ ” disappears from the display.
Playing tracks in random order
(Shuffle
Play)
You can play tracks in random order.
1
Press CD ȳ.
“CD” appears in the display.
“CD” appears in the display.
2
Press MODE Ȯ repeatedly until “SHUF” appears in
the display.
the display.
3
Press à ȫ to start Shuffle Play.
On the remote
To select the CD function, press FUNCTION Ⱦ
repeatedly until “CD” appears in the display.
repeatedly until “CD” appears in the display.
To cancel Shuffle Play
Stop playing first. Then press MODE Ȯ repeatedly until
“SHUF” disappears from the display.
“SHUF” disappears from the display.
Tip
During Shuffle Play, you cannot select the previous track by pressing
During Shuffle Play, you cannot select the previous track by pressing
ùˎÃ
(
Ã
on the remote) ȯ.
Other Operations
Creating your own program
(Program
Play)
You can arrange the playing order of up to 20 tracks on
a CD.
a CD.
1
Press CD ȳ.
“CD” appears in the display.
“CD” appears in the display.
2
Press MODE Ȯ repeatedly until “PGM” flashes in the
display.
display.
3
Press ù
ˎ
à or ß
ˎ
Ñ (Ã or Ñon the
remote) ȯ then press ENTER ȯ for the tracks you
want to program in the order you want.
want to program in the order you want.
Programed track number
Playing order
4
Press à ȫ to start Program Play.
On the remote
ˎ
To select the CD function, press FUNCTION Ⱦ
repeatedly until “CD” appears in the display.
ˎ
After you have selected “PGM”, press the number
buttons ȿ for the tracks you want to program in the
order you want, and then ENTER ȯ.
order you want, and then ENTER ȯ.
To cancel Program Play
Stop playing first. Then press MODE Ȯ repeatedly until
“PGM” disappears from the display.
“PGM” disappears from the display.
To delete the last track of the program
Press CLEAR ɀ on the remote while the player is
stopped.
stopped.
To check the order of tracks before play
Press ENTER ȯ.
Every time you press the button, the track number
appears in the programed order.
Every time you press the button, the track number
appears in the programed order.
To change the current program
Press Ą ȫ once if the CD is stopped and twice if the
CD is playing. The current program will be erased.
Then create a new program following the programing
procedure.
CD is playing. The current program will be erased.
Then create a new program following the programing
procedure.
Tips
ˎ
If you try to program 21 tracks or more, “FULL” will appear in the
display.
ˎ
You can play the same program again, since the program is saved
until you open the CD tray or turn off the power of the unit.
Presetting FM or AM radio stations
You can store radio stations into the unit’s memory. You
can preset up to 30 radio stations, 20 for FM and 10 for
AM in any order.
can preset up to 30 radio stations, 20 for FM and 10 for
AM in any order.
1
Press RADIO BAND
ˎ
AUTO PRESET ȴ on the unit to
select the band.
2
Hold down RADIO BAND
ˎ
AUTO PRESET ȴ on the
unit for 2 seconds until “AUTO” flashes in the display.
3
Press ENTER ȯ while “AUTO” flashes in the display.
The stations are stored in memory from the lower
frequencies to the higher ones.
The stations are stored in memory from the lower
frequencies to the higher ones.
If a station cannot be preset automatically
You need to preset a station with a weak signal manually.
1
Press RADIO BAND
ˎ
AUTO PRESET ȴ on the unit to
select the band.
2
Tune in a station you want.
3
Hold down ENTER ȯ on the unit for 2 seconds until
the preset number flashes in the display.
the preset number flashes in the display.
4
Press PRESET/CATEGORY + or – ȯ on the unit until
the preset number you want for the station flashes
in the display.
the preset number you want for the station flashes
in the display.
5
Press ENTER ȯ on the unit.
The new station replaces the old one.
The new station replaces the old one.
On the remote
1
Press RADIO
ˎ
BAND ȴ repeatedly until the band
you want appears in the display.
2
Tune in a station you want.
3
Hold down the number buttons ȿ that you want to
preset the new station on for about 2 seconds.
To select a one-digit preset number, hold down the
number for about 2 seconds.
To select a two-digit preset number, press the first
digit, and then hold down the second digit for about
2 seconds.
(Examples)
For preset number1: Hold down 1 ȿ for about 2
seconds.
For preset number 12: Press 1 ȿ, and then hold down
2 ȿ for about 2 seconds.
preset the new station on for about 2 seconds.
To select a one-digit preset number, hold down the
number for about 2 seconds.
To select a two-digit preset number, press the first
digit, and then hold down the second digit for about
2 seconds.
(Examples)
For preset number1: Hold down 1 ȿ for about 2
seconds.
For preset number 12: Press 1 ȿ, and then hold down
2 ȿ for about 2 seconds.
Tip
The preset radio stations remain in memory even if you unplug the
The preset radio stations remain in memory even if you unplug the
AC power cord or remove the batteries.
Playing preset FM or AM radio
stations
stations
1
Press RADIO BAND
ˎ
AUTO PRESET ȴ on the unit to
select the band.
2
Press PRESET/CATEGORY + or – ȯ on the unit
(PRESET + or – ȯ on the remote) to tune in the
stored station.
(PRESET + or – ȯ on the remote) to tune in the
stored station.
On the remote
1
Press RADIO
ˎ
BAND ȴ.
2
Press the number buttons ȿ, and then press ENTER
ȯ to tune in the stored station.
(Examples)
For preset number 1: Press 1 ȿ, and then ENTER ȯ.
For preset number 12: Press 1, 2 ȿ, and then ENTER
ȯ
ȯ to tune in the stored station.
(Examples)
For preset number 1: Press 1 ȿ, and then ENTER ȯ.
For preset number 12: Press 1, 2 ȿ, and then ENTER
ȯ
.
Presetting satellite radio channels
You can preset up to 20 XM and 20 SIRIUS channels.
1
Do steps 1 to 5 of “To listen to XM or SIRIUS” to
select the channel you want to preset.
select the channel you want to preset.
2
Hold down ENTER ȯ for 2 seconds or more.
The preset number “1” (default setting) flashes if it
is the first time to do the procedure, or the preset
number immediately following the last preset number
added.
The preset number “1” (default setting) flashes if it
is the first time to do the procedure, or the preset
number immediately following the last preset number
added.
3
Press PRESET/CATEGORY ȯ (PRESET + or – ȯ on
the remote) repeatedly to select your desired preset
number.
number.
4
Press ENTER ȯ.
Note
You cannot preset XM or SIRIUS channels except when you receive
You cannot preset XM or SIRIUS channels except when you receive
the channel.
Playing preset satellite radio
channels
channels
1
Do steps 1 to 4 of “To listen to XM or SIRIUS” to
select the channel you want to preset.
select the channel you want to preset.
2
Press PRESET/CATEGORY + or – ȯ (PRESET + or – ȯ
on the remote) repeatedly to select your desired
preset channel in All Channel mode.
on the remote) repeatedly to select your desired
preset channel in All Channel mode.
To view XM/SIRIUS information
Each time you press DISPLAY Ȭ on the unit, the display
will change as follows;
will change as follows;
“CH NAME”
Channel name
Preset number/Channel number (for 4 seconds)
“
”
Artist name*
“ ”
Song title
“CAT”
Category name
* In the case of SIRIUS, the name of the composer is shown with
artist name.
Restricting access to specific
channels (SIRIUS only)
channels (SIRIUS only)
Parental Lock
You can restrict access to certain channels using
your own password. The password is set to “0000”
as the default. Change the password before you use
this function for the first time (see “To change the
password”).
your own password. The password is set to “0000”
as the default. Change the password before you use
this function for the first time (see “To change the
password”).
1
While the SIRIUS channel you want to lock is
selected, press PARENTAL LOCK Ɂ on the remote.
“LOCK” flashes in the display.
selected, press PARENTAL LOCK Ɂ on the remote.
“LOCK” flashes in the display.
2
Press ENTER ȯ.
“ENTERCODE” appears in the display.
“ENTERCODE” appears in the display.
3
Enter a 4-digit password using the number buttons
ȿ on the remote.
“COMPLETE” appears in the display. If “INVALID”
appears, repeat steps 1 to 3.
ȿ on the remote.
“COMPLETE” appears in the display. If “INVALID”
appears, repeat steps 1 to 3.
To delete the number you have entered
Press CLEAR ɀ on the remote repeatedly.
To change the password
1
While the SIRIUS channel is selected, press
PARENTAL LOCK Ɂ on the remote repeatedly until
“EDIT CODE” flashes in the display.
PARENTAL LOCK Ɂ on the remote repeatedly until
“EDIT CODE” flashes in the display.
2
Press ENTER ȯ.
“OLD CODE” appears in the display.
“OLD CODE” appears in the display.
3
Enter the current 4-digit password using the
number buttons ȿ on the remote.
“NEW CODE” appears in the display.
number buttons ȿ on the remote.
“NEW CODE” appears in the display.
4
Enter a new 4-digit password using the number
buttons ȿ on the remote.
“CONFIRM” appears in the display.
buttons ȿ on the remote.
“CONFIRM” appears in the display.
5
Re-enter the new password to confirm it.
“COMPLETE” appears in the display. If “INVALID”
appears, repeat steps 1 to 5.
“COMPLETE” appears in the display. If “INVALID”
appears, repeat steps 1 to 5.
To listen to the locked channels
1
Select a locked channels you want to listen to using
the number buttons ȿ on the remote.
“ENTERCODE” appears in the display.
the number buttons ȿ on the remote.
“ENTERCODE” appears in the display.
2
Enter your 4-digit password using the number
buttons ȿ on the remote.
The channel is tuned in.
buttons ȿ on the remote.
The channel is tuned in.
To unlock a channel
1
While the SIRIUS channel you want to unlock is
selected, press PARENTAL LOCK Ɂ on the remote
repeatedly until “UNLOCK” flashes in the display.
selected, press PARENTAL LOCK Ɂ on the remote
repeatedly until “UNLOCK” flashes in the display.
2
Press ENTER ȯ.
“COMPLETE” appears in the display.
“COMPLETE” appears in the display.
Notes
ˎ
When you select a channel using TUNE/CHANNEL + or – ̚ in All
Channel mode or Category mode, locked channels are skipped.
ˎ
The display will return to the original indication if you press Ą ̖
or if no entry is made for a set period of time after you have been
prompted to enter the password.
ˎ
When the unit is reset to the factory settings, the Parental Lock
password returns to the default (“0000”), but Parental Lock settings
are not removed.
ˎ
You cannot preset locked channels.
ˎ
If you set the Parental Lock for a preset channel, the preset
information for that channel returns to the default.
ˎ
You cannot set the Parental Lock for channels 0 or 184.
Falling asleep to music
1
Play the music source you want.
2
Press SLEEP Ⱥ on the unit to display “SLEEP.”
3
Press SLEEP Ⱥ on the unit to select the minutes
until the unit goes off automatically.
Each time you press the button, the indication changes
as follows:
“AUTO*” “60MIN” “30MIN” “20MIN”
“10MIN” “OFF”.
until the unit goes off automatically.
Each time you press the button, the indication changes
as follows:
“AUTO*” “60MIN” “30MIN” “20MIN”
“10MIN” “OFF”.
* When you select “AUTO”, the CD stops playing in 90 minutes at
most and the unit goes off automatically. When you are listening
to the radio, the radio goes off in 90 minutes.
If 4 seconds have passed after you pressed SLEEP Ⱥ,
the minutes in the display are entered.
When the preset time has passed, the unit goes off
automatically.
the minutes in the display are entered.
When the preset time has passed, the unit goes off
automatically.
To cancel the sleep function
Press POWER ȩ to turn off the power.
Tip
The display’s backlight goes off while sleeping time is active.
The display’s backlight goes off while sleeping time is active.
Connecting optional component
You can enjoy the sound from a PC, TV, VCR, portable
digital music player, etc. through the speakers of this unit.
Be sure to turn off the power of each component before
making any connections.
For details, refer to the instruction manual of the
component to be connected.
digital music player, etc. through the speakers of this unit.
Be sure to turn off the power of each component before
making any connections.
For details, refer to the instruction manual of the
component to be connected.
1
Connect the AUDIO IN jack ȷ on the unit to the
line output jack of the portable digital music player
or other components using an audio connecting
cable* (not supplied).
line output jack of the portable digital music player
or other components using an audio connecting
cable* (not supplied).
* For a PC: use a cable which fills the connector of your PC.
For a TV or VCR: use a cable with a stereo-mini plug on one
end and two phono plugs on the other end.
For a portable digital music player: use a cable with a stereo-
mini plug on both ends.
2
Turn the unit and the connected component on.
3
Press AUDIO IN ȵ on the unit and start playing
sound on the connected component.
The sound from the connected component is output
from the speakers.
sound on the connected component.
The sound from the connected component is output
from the speakers.
ZS-SAT1
6
•
This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
SECTION 3
DISASSEMBLY
SET
3-2. CABINET (LOWER)
ASSY
(Page 7)
(Page 7)
3-5. MAIN BLOCK ASSY
(Page 9)
3-3. CABINET (UPPER) ASSY
(Page 8)
3-4. CD BLOCK
(Page 8)
3-6. MAIN BOARD/
CD BLOCK ASSY
(Page 9)
(Page 9)
3-8. BELT
(Page 10)
3-7. SPEAKER (10 cm) (SP101) (L-CH),
SPEAKER (10 cm) (SP201) (R-CH)
(Page 10)
(Page 10)
3-9. OPTICAL PICK-UP BLOCK
(KSM-213CCP)
(Page 11)
(Page 11)
ZS-SAT1
7
Note:
Follow the disassembly procedure in the numerical order given.
3-2. CABINET (LOWER) ASSY
2
three screws
(B2.6)
(B2.6)
3
Release two hooks.
4
battery case lid
1
5
six screws
(B2.6)
(B2.6)
qa
foot (felt)
6
qa
cabinet (lower) assy
7
flexible flat cable (9 core)
(CNP811)
(CNP811)
9
connector
(T801)
(T801)
0
connector
(CN901)
(CN901)
5
six screws
(B2.6)
(B2.6)
Turn the set.
8
flexible flat cable (15 core)
(CN001)
(CN001)
qa
foot (felt)
ZS-SAT1
8
3-3. CABINET (UPPER) ASSY
3-4. CD BLOCK
6
7
flexible flat cable (4 core)
(CNP810)
(CNP810)
8
cabinet (upper) assy
3
two screws
(B2.6)
(B2.6)
1
screw
(M3)
(M3)
2
telescopic antenna
(ANT1)
(ANT1)
5
screw
(P2.6
(P2.6
×
10)
5
screw
(P2.6
(P2.6
×
10)
4
screw
(B2.6)
(B2.6)
4
screw
(B2.6)
(B2.6)
5
insulator
6
CD block
5
insulator
4
2
two floating screws
2
floating screw
3
two springs
(insulator)
(insulator)
3
two springs (insulator)
2
two floating screws
5
insulator
5
insulator
1
flexible flat cable
(14 core) (CNP702)
(14 core) (CNP702)
Click on the first or last page to see other ZS-SAT1 service manuals if exist.