Sony ZS-PS20CP Service Manual ▷ View online
ZS-PS20CP
5
SECTION 1
SERVICING NOTES
On repairing CD section, playing a disc without the lid (CD), use
Chuck Plate Jig.
• Code number of Chuck Plate Jig: X-4918-255-1
Chuck Plate Jig.
• Code number of Chuck Plate Jig: X-4918-255-1
CHUCK PLATE JIG ON REPAIRING
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
1. Turn ON the [OPERATE] button and press [CD] button to CD
CHECK
1. Turn ON the [OPERATE] button and press [CD] button to CD
position.
2. Open the CD lid.
3. Turn on S801 with screwdriver, etc. as following fi gure.
4. Press the [
3. Turn on S801 with screwdriver, etc. as following fi gure.
4. Press the [
N X
] (CD) button.
5. Confi rm the laser diode emission while observing the objecting
lens. When there is no emission, Auto Power Control circuit or
Optical Pick-up is broken.
Optical Pick-up is broken.
Objective lens moves up and down three times for focus
search.
S801
ZS-PS20CP
6
Tips
[
number to be played is displayed.
[
Y or open the CD compartment in
stop mode.
Note
.
Example of folder structure and playing order
Folder
Notes on MP3/WMA discs
[
During this time, “READING” is displayed. If there are many folders
on a disc to be used for MP3/WMA listening.
[
[
[
Maximum number of folders: 150
Maximum directory steps: 8
Maximum directory steps: 8
[
characters.
[
Other characters are displayed as “_”.
[
has the ID3 tag information, “song title”, “artist name”, and “album
name” can be displayed.
name” can be displayed.
[
[
generate random noise that could damage your speakers.
[
[
may not be played as shown in the illustration.
Listening to the radio
1
Press RADIO
RE
on the unit (BAND
RK
on the
remote) repeatedly.
Each time you press the button, the indication changes
as follows:
“FM”
Each time you press the button, the indication changes
as follows:
“FM”
U “AM”.
2
Hold down TUNE + or –
until the frequency digits
begin to change in the display.
If you cannot tune in a station, press TUNE + or –
repeatedly to change the frequency step by step.
When an FM stereo broadcast is received, “ST”
appears.
When an FM stereo broadcast is received, “ST”
appears.
Tip
If the FM broadcast is noisy, press MODE until “MONO” appears
in the display and the radio will play in monaural.
in the display and the radio will play in monaural.
Changing the AM tuning interval
If you need to change the AM tuning interval, do the
following:
following:
1
Press RADIO
RE
on the unit until “AM” is displayed.
2
Press DISPLAY/ENTER
on the unit for 2 seconds.
3
Press RADIO
RE
on the unit for 2 seconds.
4
Press PRESET + or –
on the unit to select “9k
STEP” for 9 kHz interval or “10k STEP” for 10 kHz
interval.
interval.
5
Press DISPLAY/ENTER
on the unit.
your preset AM radio stations.
Opening/closing the Sliding Tray
Connecting a USB device
1
Press
RL
.
RH
is ejected.
2
Connect your USB device to the
(USB) port
RH
.
Tip
A digital music player is charged automatically in the USB mode when
connected to the
connected to the
(USB) port RH.
Closing the Sliding Tray
1
Remove the USB device (see “Listening to music of a
USB device”).
USB device”).
2
Slide the Lock
RM
as indicated by the arrow.
Lock RM
3
Push the Sliding Tray
RH
into the unit until it clicks.
Notes
[
Do not carry the unit with a USB device inserted to the connector.
Doing so may cause a malfunction.
Doing so may cause a malfunction.
[
Be sure to store the Sliding Tray RH before moving the unit.
Basic Operations
Listening to music of a USB device
You can listen to music stored on an optional USB device
(digital music player or USB storage media).
(digital music player or USB storage media).
this unit.
See “Playable USB devices” on the back page for a list of
USB devices that can be connected to this unit.
See “Playable USB devices” on the back page for a list of
USB devices that can be connected to this unit.
* Files with copyright protection (Digital Rights Management) cannot
be played on this unit.
1
Press USB
RE
on the unit.
2
Connect the USB device to the
(USB) port
RH
(See
“Connecting a USB device”).
“USB MEMORY” appears in the display.
“USB MEMORY” appears in the display.
3
Press
V
.
File number
playing time will appear
4
Press VOLUME + or – (or VOL + or – on the remote)
RT
to adjust the volume.
Other operations
To
Press
Pause playback
V
. To resume play, press the
button again*.
Stop playback
Y
.
Select a folder
+ or –
.
or
.
Find a point in a
Hold down
or
during
playback, and release the button at
the desired point.
the desired point.
Select Repeat Play
REPEAT
on the unit repeatedly
until “
” or “
1” appears.
Remove the USB
device
device
Hold down
Y
until “NO DEV”
appears, then remove the USB
device.
device.
*
Tips
[
playing time to be played are displayed.
[
Y .
Note
Always hold down Y and make sure that “NO DEV” appears
before removing the USB device. Removing the USB device while
“NO DEV” is not displayed may corrupt the data on the USB device
or damage the USB device itself.
before removing the USB device. Removing the USB device while
“NO DEV” is not displayed may corrupt the data on the USB device
or damage the USB device itself.
To change the play mode
Press MODE
Press MODE
repeatedly while the USB device is not
device (or in the selected folder while “
” lights up) one
SHUF”), or
Program Play (“PGM”).
Notes on the USB device
[
You cannot change the play mode during playback.
[
Some time may be needed before playback starts when:
– the folder structure is complex.
– the USB device is close to capacity.
– the folder structure is complex.
– the USB device is close to capacity.
[
[
Do not connect a USB device to the unit through a USB hub.
[
For some USB devices, when an operation is performed on the USB
device, there may be a delay before it is carried out on this unit.
device, there may be a delay before it is carried out on this unit.
[
connected USB device.
[
on the connected USB device.
[
skipped.
[
[
or malfunction.
[
contained on a single USB device.
[
recording devices, and recording media cannot be guaranteed. If you
use an incompatible USB device, sound skipping or noise may be
produced, or the device may not play at all.
use an incompatible USB device, sound skipping or noise may be
produced, or the device may not play at all.
Connecting optional components
You can enjoy the sound from an optional component
such as a portable digital music player through the
such as a portable digital music player through the
component before making any connections. For details,
refer to the instruction manual of the component to be
connected.
refer to the instruction manual of the component to be
connected.
1
Connect the AUDIO IN jack
RB
on the unit to the line
output jack of the portable digital music player or
other components using an audio connecting cable
(not supplied).
other components using an audio connecting cable
(not supplied).
2
Turn the unit and the connected component on.
3
Press AUDIO IN
RE
and start playing sound on the
connected component.
from the speakers.
To connect the unit to a TV or VCR, use an extension
cable (not supplied) with a stereo-mini jack on one end
and two phono plugs on the other end.
cable (not supplied) with a stereo-mini jack on one end
and two phono plugs on the other end.
Before using the unit
About the operating voltage
the unit. For changing the AM tuning interval, radio
frequency range, and AC operation, check the operating
voltage of your unit.
frequency range, and AC operation, check the operating
voltage of your unit.
Press OPERATE
.
To adjust the volume
Press VOLUME +, – (VOL +, – on the remote)
Press VOLUME +, – (VOL +, – on the remote)
RT
.
To listen through headphones
Connect the headphones to the
Connect the headphones to the
J (headphones) jack
RG
.
To reinforce the bass sound
Press MEGA BASS
Press MEGA BASS
on the unit.
“MEGA BASS” appears in the display.
To return to normal sound, press the button again.
To return to normal sound, press the button again.
Playing a CD/MP3/WMA disc
1
Press CD
RE
on the unit.
(On the remote, press OPERATE
and then press
FUNCTION
RI
repeatedly until “CD” appears in the
display.)
2
Press
; PUSH OPEN/CLOSE
on the unit, and
place a disc with the label side up in the CD
compartment.
To close the CD compartment, press
compartment.
To close the CD compartment, press
; PUSH OPEN/
CLOSE
on the unit.
3
Press V
.
When you place MP3/WMA discs, “MP3” or “WMA”
information.
Audio CD
Audio CD
Track number
Playing time
MP3/WMA disc (Example: When you place MP3 disc)
File number
playing time will appear
To
Press
Pause playback
V
. To resume play, press it
again.
Stop playback
Y
.
Go to the next
track/MP3/WMA
track/MP3/WMA
.
Go back to the
previous track/
previous track/
.
Select a folder on
an MP3/WMA
disc
an MP3/WMA
disc
+ on the unit to go forward and
– to go backward
– to go backward
.
Locate a point
while listening to
the sound
while listening to
the sound
(forward) or
(backward)
on the unit while playing and
Locate a point
while observing
the display
while observing
the display
(forward) or
(backward)
on the unit in pause and hold it
Remove the CD
;
PUSH OPEN/CLOSE
.
* VOLUME + (VOL + on the remote) RT and
V on the unit have
a tactile dot.
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
ZS-PS20CP
7
Using the display
You can check information about the CD using the
display.
display.
Checking the information of an audio CD
To check the total track number and playing
time of the CD
Press
time of the CD
Press
Y
to stop the CD playback.
Total track number
Total playing time
Checking the information of an MP3/WMA
disc
disc
To check the total folder number on the CD
Press
Press
Y
to stop the CD playback.
(Example: When you place MP3 disc)
Total folder number
Press DISPLAY/ENTER
on the unit while playing an
#
S
)*
S
)
S
)*
*
appears in the display.
repeatedly
(Repeat Play)
1
Press CD
RE
on the unit.
“CD” appears in the display.
2
Proceed as follows:
To repeat
Do this
A single track/
MP3/WMA
MP3/WMA
1 Press REPEAT
on the unit until
“
1” appears.
2 Press
or
to select the
to repeat.
3 Press
V
.
All tracks/
MP3/WMA
MP3/WMA
1 Press REPEAT
on the unit until
“
” appears.
2 Press
V
.
A selected
folder (MP3/
WMA disc
only)
folder (MP3/
WMA disc
only)
1 Press MODE
until “
” appears
and then press REPEAT
until
“REP” appears.
2 Select the folder by pressing
+ or
–
.
3 Press
V
.
Tracks/MP3/
random order
1
2 Press REPEAT
on the unit until
“
” appears.
3 Press
V
.
MP3/WMA
selected folder
in random
order (MP3/
WMA disc
only)
in random
order (MP3/
WMA disc
only)
1
order”).
2 Press REPEAT
on the unit until
“
” appears.
3 Press
V
.
Programed
tracks/MP3/
tracks/MP3/
1
“Creating your own program”).
2 Press REPEAT
on the unit until
“
” appears.
3 Press
V
.
To cancel Repeat Play
Press REPEAT
Press REPEAT
on the unit until “
” disappears from
the display.
Other Operations
random order
1
Press CD
RE
on the unit.
“CD” appears in the display.
2
Press MODE
until “SHUF” appears in the display.
only), press MODE
on the unit until “
” and
+ or –
on the unit to select the folder you want.
3
Press V
until “SHUF”
disappears from the display.
Tips
[
.
[
Creating your own program
(Program
Play)
You can arrange the playing order of up to 25 tracks/
1
Press CD
RE
on the unit.
“CD” appears in the display.
2
Press MODE
until “PGM” appears in the display.
3
Press
or
to select the track/MP3/WMA
to add it to
the program.
Repeat to program other tracks in the order that you
want.
Repeat to program other tracks in the order that you
want.
number is added.
Audio CD (Program Play)
Total playing time of the selected track
Programmed track number
MP3/WMA disc (Program Play) (Example: When you place MP3 disc)
4
Press
V
to start Program Play.
To cancel Program Play
until “PGM”
disappears from the display.
To clear the program you set
Press
Press
Y
.
“NO STEP” appears in the display for 2 seconds, and the
same display information as when inserting a CD
appears.
same display information as when inserting a CD
appears.
Tips
[
You can play the same program again, since the program is saved,
until you press Y or open the CD compartment.
until you press Y or open the CD compartment.
[
Presetting radio stations
You can store radio stations in unit’s memory. You can
preset up to 30 radio stations, 20 for FM and 10 for AM
in any order.
preset up to 30 radio stations, 20 for FM and 10 for AM
in any order.
1
Press RADIO
RE
repeatedly on the unit to select the
band.
2
Hold down RADIO
RE
on the unit for 2 seconds until
3
Press DISPLAY/ENTER
on the unit.
frequencies to higher ones.
If a station cannot be preset automatically
You may need to preset a station with a weak signal
manually.
You may need to preset a station with a weak signal
manually.
1
Press RADIO
RE
repeatedly on the unit to select the
band.
2
Tune in the station you want.
3
Hold down DISPLAY/ENTER
on the unit for 2
display.
4
Press PRESET + or –
on the unit until the preset
display.
5
Press DISPLAY/ENTER
on the unit.
Tip
AC power cord or remove the batteries.
Playing preset radio stations
1
Press RADIO
RE
repeatedly on the unit to select the
band.
2
Press PRESET + or –
on the unit to tune in the
stored station.
Falling asleep to music
1
Play the music source you want.
2
Press SLEEP
to display “SLEEP”.
3
Press SLEEP
to select the minutes until the unit
Each time you press the button, the indication changes
as follows:
“AUTO*”
as follows:
“AUTO*”
U “60MIN” U “30MIN” U “20MIN” U
“10MIN”
U “OFF”.
* When you select “AUTO”, the CD and USB stops playing in 90
minutes.
automatically.
, the
currently displayed time option is entered.
To cancel the sleep function
Press OPERATE
Press OPERATE
repeatedly to set the sleep timer to “OFF” in step
3.
Playable USB devices
You can use the following Sony USB devices on this unit.
Other USB devices are not playable on this unit.
Other USB devices are not playable on this unit.
January 2008)
Product name
Model name
Walkman
3
NWD-B103 / B103F / B105 /
B105F
B105F
NWZ-A815/A816/A818
NWZ-S515/S516/S615F/S616F/
S618F/S716F
S618F/S716F
Check the websites below for the latest information about
compatible devices.
For customers in Europe:
<http://support.sony-europe.com/>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.sony-asia.com/section/support>
compatible devices.
For customers in Europe:
<http://support.sony-europe.com/>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.sony-asia.com/section/support>
Notes
[
When formatting the above models, be sure to format using the
[
Do not use any other than these USB devices. Operation of models
not listed here is not guaranteed.
not listed here is not guaranteed.
[
Operation may not always be ensured even when using these USB
devices.
devices.
[
Some of these USB devices may not be available for purchase in
certain areas.
certain areas.
[
protection is not supported.
[
Files downloaded from a music download website may not be
played.
played.
[
Connection through a hub is not supported.
ZS-PS20CP
8
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. CABINET
(REAR)
ASSY
(Page
9)
3-2. CABINET
(FRONT)
ASSY,
CABINET
(UPPER)
ASSY
(Page
9)
SET
3-3. MAIN
BOARD
(Page
10)
3-8. USB
TRAY
ASSY
(Page
12)
3-4. CD
BLOCK
ASSY
(Page
10)
3-5. OPTICAL
PICK-UP,
CD
BOARD
(Page
11)
3-6. LCD
BOARD
(Page
11)
3-7. CD
LID
(Page
12)
3-10. POWER BOARD
(Page
(Page
13)
3-9. KEY (VOL) BOARD,
KEY (FUNC) BOARD
(Page
13)
Click on the first or last page to see other ZS-PS20CP service manuals if exist.