DOWNLOAD Sony TC-WE425 / TC-WE525 / TC-WR681 Service Manual ↓ Size: 3.35 MB | Pages: 39 in PDF or view online for FREE

Model
TC-WE425 TC-WE525 TC-WR681
Pages
39
Size
3.35 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
tc-we425-tc-we525-tc-wr681.pdf
Date

Sony TC-WE425 / TC-WE525 / TC-WR681 Service Manual ▷ View online

– 1 –
Model Name Using Similar
Mechanism
NEW
Tape Transport
DECK A
TCM-230ASR1
Mechanism Type
DECK B
TCM-230ASR2
SERVICE MANUAL
US Model
TC-WE425/WR681
Canadian Model
TC-WE425
AEP Model
TC-WE525/WR681
UK Model
TC-WE525
E Model
Australian Model
TC-WE425/WR681
Chinese Model
TC-WE425
TC-WE425/WE525/
WR681
STEREO CASSETTE DECK
MICROFILM
System
Recording system
4-track 2-channel stereo
Fast-winding time (approx.)
100 sec. (with Sony C-60 cassette)
Bias
AC bias
Signal-to-noise ratio (at peak level and weighted with Dolby NR off)
Type I tape, Sony Type I (NORMAL): 55 dB
Type II tape, Sony Type II (HIGH): 57 dB
Type IV tape, Sony Type IV (METAL): 58 dB
S/N ratio improvement (approximate values)
With Dolby B NR on: 5 dB at 1 kHz, 10 dB at 5 kHz
With Dolby C NR on: 15 dB at 500 Hz, 20 dB at 1 kHz
Harmonic distortion
0.4% (with Type I tape, Sony Type I (NORMAL):
160 nWb/m 315 Hz, 3rd H.D.)
1.8% (with Type IV tape, Sony Type IV (METAL):
250 nWb/m 315 Hz, 3rd H.D.)
SPECIFICATIONS
– Continued on next page –
Photo: TC-WE425
Dolby noise reduction extension manufactured under license
from Dolby Laboratories Licensing Corporation.
HX Pro originated by Bang & Olufsen. “DOLBY”, the double-D
symbol 
a
 and “HX PRO” are trademarks of Dolby Laboratories
Licensing Corporation.
Frequency response (Dolby NR off)
Tape type
Type I tape, Sony Type I
30-16,000 Hz (
±
3 dB, IEC),
(NORMAL)
20-17,000 Hz (
±
6 dB)
Type II tape, Sony Type II
30-17,000 Hz (
±
3 dB, IEC),
(HIGH)
20-18,000 Hz (
±
6 dB)
Type IV tape, Sony Type IV
30-19,000 Hz (
±
3 dB, IEC),
(METAL)
20-20,000 Hz (
±
6 dB),
Wow and flutter
±
 0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±
 0.2% W. Peak (DIN)
– 2 –
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
!
  OR  DOTTED  LINE
WITH  MARK  
!
  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS  WHOSE
PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  MANUAL  OR
IN  SUPPLEMENTS  PUBLISHED  BY  SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
 À LA SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 
!
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE  DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
To Exposed Metal
Parts on Set
0.15
µ
F
1.5k
AC
voltmeter
(0.75V)
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, screws,
and all other exposed metal parts for AC leakage. Check leakage as
described below.
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microampers).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a VOM
or battery-operated AC voltmeter. The “limit” indication is 0.75
V, so analog meters must have an accurate low-voltage scale.
The Simpson 250 and Sanwa SH-63Trd are examples of a pas-
sive VOM that is suitable. Nearly all battery operated digital
multimeters that have a 2V AC range are suitable. (See Fig. A)
Inputs
Line inputs (phono jacks)
Sensitivity : 0.16 V
Input impedance : 47 kilohms
Outputs
Line outputs (phono jacks)
Rated output level : 0.5 V at a load impedance of
47 kilohms
Load impedance : Over 10 kilohms
Headphones (stereo phono jack) (TC-WE425/WE525 only)
Output level : 0.25 mW at a load impedance of
32 ohms
General
Power requirements
Where purchased
Power requirements
US, Canadian
120 V AC, 60 Hz
AEP, UK, Chinese
220 - 230 V AC, 50/60 Hz
Australian
240 V AC, 50/60 Hz
E, Singapore, Malaysia
120/220/230 - 240 V AC, 50/60 Hz
Power consumption
18 W
Dimensions (approx.) (w/h/d)
430 
×
 120 
×
 290 mm (w/h/d)
(17 
×
 4 
3/4
 
×
 11 
3/8
 in.)
including projecting parts and controls
Mass (approx.)
4 kg (8 lbs 13 oz)
Supplied accessories
Audio connecting cords (2 phono plugs - 2 phono
plugs) (2)
CONTROL A1 cord (supplied for Canadian models
only) (1)
Design and specifications are subject to change without
notice.
– 3 –
TABLE OF CONTENTS
1. GENERAL
1-1.   Location of Controls ........................................................... 4
2. DISASSEMBLY
2-1.   Case ..................................................................................... 5
2-2.   Front Panel Assy ................................................................. 5
2-3.   Cassette Lid Assy (Deck A/B) ............................................ 6
2-4.   Mechanism Deck Assy (Deck A/B) .................................... 6
2-5.   Leaf SW (A) board (Deck A),
Leaf SW (B) board (Deck B) .............................................. 7
2-6.   Pinch Lever (FWD)/(REV) Assy (Deck A/B) ..................... 8
2-7.   Flywheel (FWD)/(REV) Assy (Deck A/B) ......................... 8
2-8.   Mechanical Block Assy (Deck A/B) ................................... 9
2-9.   Head Relay (PB) Board (Deck A),
Head Relay (REC) Board (Deck B) .................................... 9
3. MECHANICAL ADJUSTMENTS
............................... 10
4. ELECTRICAL ADJUSTMENTS
................................. 10
5. DIAGRAMS
5-1.   IC Pin Description ............................................................. 14
5-2.   Circuit Boards Location .................................................... 16
5-3.   Printed Wiring Boards –Main Section– ............................ 17
5-4.   Schematic Diagram –Main Section (1/3)– ........................ 19
5-5.   Schematic Diagram –Main Section (2/3)– ........................ 21
5-6.   Schematic Diagram –Main Section (3/3)– ........................ 23
5-7.   Printed Wiring Boards –Panel Section– ............................ 25
5-8.   Schematic Diagram –Panel Section– ................................ 27
5-9.   Printed Wiring Boards –Power Section– ........................... 29
5-10. Schematic Diagram –Power Section– ............................... 31
5-11. Printed Wiring Board –Deck A Section– ........................... 32
5-12. Schematic Diagram –Deck A Section– ............................. 32
5-13. Printed Wiring Board –Deck B Section– .......................... 33
5-14. Schematic Diagram –Deck B Section– ............................. 33
6. EXPLODED VIEWS
6-1.   Case Section ...................................................................... 34
6-2.   Chassis Section ................................................................. 35
6-3.   Cassette Holder Section .................................................... 36
6-4.   Front Panel Section ........................................................... 37
6-5.   Tape Mechanism Section .................................................. 38
7. ELECTRICAL PARTS LIST
........................................ 39
MODEL IDENTIFICATION
–Back panel–
Part No.
Part No.
Model
3-021-244-0
π
TC-WE425 : US model
3-021-244-1
π
TC-WE425 : CND model
3-021-244-2
π
TC-WE525 : AEP model
3-021-244-3
π
TC-WE525 : UK model
3-021-244-4
π
TC-WE425 : AUS model
3-021-244-5
π
TC-WE425 : SP, MY model
3-021-244-6
π
TC-WE425 : CH model
3-021-245-0
π
TC-WR681 : US model
3-021-245-1
π
TC-WR681 : AEP model
3-021-245-2
π
TC-WR681 : E model
3-021-245-3
π
TC-WR681 : AUS model
3-021-245-4
π
TC-WR681 : SP model
• Abbreviation
CND : Canadian model
AUS : Austrarian model
SP
: Singapore model
MY
: Malaysia model
CH
: Chinese model
– 4 –
SECTION 1
GENERAL
1-1. LOCATION OF CONTROLS
1.
1/u (Power) button (US, Canadian)
U (Power) button (EXCEPT US, Canadian)
2. DIRECTION MODE switch
3. PITCH CONTROL (
Ø ON/ø OFF) switch (TC-WE525)
4. PITCH CONTROL knob (TC-WE525)
5. Cassette holder (Deck A)
6. COUNTER A buttons (Deck A)
RESET button
MEMORY button
7. Display window
8. COUNTER B buttons (Deck B)
RESET button
MEMORY button
9. Cassette holder (Deck B)
10. Tape operation buttons (Deck A)
0 (REW) button
) (FF) button
p CLEAR (Stop) button
ª (Reverse play) button
· (Foward play) button
11.
§ (Eject) button (Deck A)
12. DOLBY NR switch
13. Tape operation buttons (Deck B)
0 (REW) button
) (FF) button
p (Stop) button
ª (Reverse play) button
· (Foward play) button
P PAUSE button
R REC MUTING button
r REC button
14.
§ (Eject) button (Deck B)
15. START (DECK B 
P) button
HIGH/NORMAL, DUBBING A
nB button
16. PHONES jack (TC-WE425/WE525)
17. SYNCHRO button and indicator (TC-WE425/WE525)
18. ARL button
19. FADER button
20. REC LEVEL knob
21. AUTO indicator
1
2
3
4
5
6
7
9
8
21
20
19
18
17
16
10
13
12
14
11
15
Page of 39
Display

Sony TC-WE425 / TC-WE525 / TC-WR681 Service Manual ▷ Download

  • DOWNLOAD Sony TC-WE425 / TC-WE525 / TC-WR681 Service Manual ↓ Size: 3.35 MB | Pages: 39 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony TC-WE425 / TC-WE525 / TC-WR681 in PDF for free, which will help you to disassemble, recover, fix and repair Sony TC-WE425 / TC-WE525 / TC-WR681 Audio. Information contained in Sony TC-WE425 / TC-WE525 / TC-WR681 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.