Sony TA-SA100WR Service Manual ▷ View online
TA-SA100WR
25
Pin No.
Pin Name
I/O
Description
77, 78
NO USE
-
Not used
79
S-AIR_RESET
O
S-AIR reset signal output to the EZW-RT10 "L": reset
80
NO USE
-
Not used
81
EEP_WP
O
Write protect signal output to the EEPROM "H": protect
82
EEP_SCL
I/O
Serial clock signal input/output with the EEPROM
83
EEP_SDA
I/O
Serial data input/output with the EEPROM
84
DAMP_OUT2DLY_SW
I
Clock delay switch input terminal Fixed at "H" in this set
85
DAMP_PWM_MODE_
SW
I
Setting terminal for the PWM mode output switch Fixed at "H" in this set
86, 87
NO USE
-
Not used
88
PAIRING_LED
O
LED drive signal output of the pairing indicator "H": LED on
89
NO USE
-
Not used
90
S-AIR_ID_SW
I
S-AIR ID select signal input terminal
91
SUR_MODE_SW
I
Surround mode select signal input terminal "L": surround, "H": surround back
92
RESERVE1
I
Destination select signal input terminal Fixed at "L" in this set
93
RESERVE2
I
Model select signal input terminal Fixed at "L" in this set
94
KEY2
I
Key2 input terminal (for debug)
95
KEY1
I
Key1 input terminal (for debug)
96
AVss
-
Ground terminal
97
KEY0
I
Key0 input terminal (for debug)
98
Vref
I
Reference voltage (+3.3V) input terminal
99
AVcc
-
Power supply terminal (+3.3V)
100
NO USE
-
Not used
26
TA-SA100WR
SECTION 5
EXPLODED VIEWS
1
2-895-066-11 FOOT
2
3-277-779-01 CASE
3
3-277-783-01 COVER (CORD) (Speaker cord cover)
4
3-277-784-01 BOTTOM COVER (CORD) (Speaker cord holder)
#1
7-685-871-01 SCREW +BVTT 3X6 (S)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice.
vice.
Some delay should be anticipated when
ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
R
R
Parts Color Cabinet’s Color
• Accessories are given in the last of the
electrical parts list.
• Abbreviation
AUS :
AUS :
Australian
model
CH
: Chinese model
CND : Canadian model
E3
E3
: 240V AC area in E model
E15
: Iranian model
E32
: 110V – 240V AC area in E model
EA
: Saudi Arabia model
KR
: Korean model
MX
: Mexican model
RU
: Russian model
SP
: Singapore model
TH :
Thai
model
TW :
Taiwan
model
5-1. COVER SECTION
3
4
#1
#1
1
2
1
top shield section
Ver. 1.4
The components identifi ed by mark
0
or dotted line with mark
0 are critical for
safety.
Replace only with part number specifi ed.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0 sont critiques pour la sécurité.
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
tant le numéro spécifi é.
27
TA-SA100WR
51
3-077-331-21 +BV3
(3-CR)
0 52
1-769-079-62 CORD, POWER (KR)
0 52
1-782-464-22 CORD, POWER (CH)
0 52
1-827-597-42 CORD, POWER (TW)
0 52
1-834-288-11 CORD, POWER (TH)
0 52
1-834-966-21 CORD, POWER (PX)
0 52
1-834-966-41 POWER-SUPPLY CORD
(AEP, RU, UK, E3, E15, E32, EA, SP)
0 52
1-834-978-21 CORD, POWER (US, CND, MX)
0 52
1-835-068-21 CORD, POWER (AUS)
53
3-703-244-00 BUSHING (2104), CORD (EXCEPT TH)
53
4-916-783-01 BUSHING, CORD (TH)
#1
7-685-871-01 SCREW +BVTT 3X6 (S)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
5-2. TOP SHEILD SECTION
not supplied
#1
51
51
51
51
51
52
53
chassis section
front panel section
Ver. 1.4
28
TA-SA100WR
101
3-277-778-01 PANEL, FRONT (US, CND)
101
3-277-778-11 PANEL, FRONT (EXCEPT US, CND)
102
3-277-780-01 BUTTON
(POWER)
103
3-087-053-01 +BVTP2.6
(3CR)
104
2-149-422-02 INDICATOR,
POWER
#2
7-685-133-19 SCREW +P 2.6X6 TYPE 2 NON-SLIT
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
5-3. FRONT PANEL SECTION
#2
103
103
102
101
104
not supplied
not supplied
(PANEL board)
(PANEL board)
not supplied
(POWER SW board)
(POWER SW board)
not supplied
not supplied
Note: The front panel (Ref.No.101) and the power indicator (Ref.
No.104) are welded.
Please exchange both at the same time when you exchange
the front panel or the power indicators.
the front panel or the power indicators.
Please give the welding just like the state before it exchang-
es it when you install the power indicator in the front panel.
es it when you install the power indicator in the front panel.
Ver. 1.2
Click on the first or last page to see other TA-SA100WR service manuals if exist.