DOWNLOAD Sony STR-LV700R Service Manual ↓ Size: 2.66 MB | Pages: 45 in PDF or view online for FREE

AEP Model

UK Model

2004F02-1

© 2004.06

Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.

– Continued on next page –

“DTS” and “DTS Digital Surround” are trademarks of Digital
Theater Systems, Inc.

Amplifier section
POWER OUTPUT
Rated power output in stereo mode
(8 

Ω 1 kHz, DIN)

50 W + 50 W

Reference power output
(4 

Ω 1 kHz, DIN)

FRONT

1)

: 75 W/ch

CENTER

1)

: 75 W

SURROUND

1)

:75 W/ch

1)

 Depending on the sound field settings and the source, there may be no

sound output.

Frequency response

20 Hz – 20 kHz

DVD, TV/SAT, HDD/MD

Sensitivity: 500 mV

Inputs (analogue)

Impedance: 50 k

Ω

DVD, TV/SAT, HDD/MD

S/N

2)

: 84 dB

(A, 500 mV

3)

)

2)

 Input short.

3)

 Weighted network, input level.

Inputs (digital)

DVD (coaxial)

Impedance: 75 

Ω

S/N: 90 dB

(A, 20 kHz LPF)

DVD, TV/SAT,

S/N: 90 dB

HDD/MD (optical)

(A, 20 kHz LPF)

Sampling frequency
COAX, OPT

96 kHz

Outputs
LINE (subwoofer)

Voltage: 2 V
Impedance: 1 k

Ω

FM tuner section
Tuning range

87.5 – 108.0 MHz

Antenna terminals

75 

Ω, unbalanced

Intermediate frequency

10.7 MHz

Sensitivity
Mono:

18.3 dBf, 2.2 

µV/75 Ω

Stereo:

38.3 dBf, 22.5 

µV/75 Ω

Useable sensitivity

11.2 dBf, 1 

µV/75 Ω

S/N
Mono:

76 dB

Stereo:

70 dB

Harmonic distortion at 1 kHz
Mono:

0.3%

Stereo:

0.5%

Separation

45 dB at 1 kHz

Frequency response

30 Hz – 15 kHz,
+0.5/–2 dB

Selectivity

60 dB at 400 kHz

AM tuner section
Tuning range

531 – 1,602 kHz

Antenna

Loop antenna

Intermediate frequency

450 kHz

Usable sensitivity

50 dB/m (at 999 kHz)

S/N

54 dB (at 50 mV/m)

Harmonic distortion

0.5% (50 mV/m, 400 Hz)

Selectivity
At 9 kHz:

35 dB

2

Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)

Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40

°C higher than

ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350

°C.

Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!

0

0

Specifications ............................................................................  1

...................................................................... 3

................................................... 4

................................................................. 7

4-1.   IC Pin Function Descriptions ................................ 13
4-2.   Block Diagrams – Tuner/DSP Section – ............... 18
         Block Diagrams – Display/Power Section – ......... 19
4-3.   Printed Wiring Boards
         – Digital Section (Side A)– ................................... 20
         Printed Wiring Boards

                   – Digital Section (Side B)– ................................... 21

4-4.   Schematic Diagram – Digital Section (1/3)– ........ 22
4-5.   Schematic Diagram – Digital Section (2/3)– ........ 23
4-6.   Schematic Diagram – Digital Section (3/3)– ........ 24
4-7.   Schematic Diagram – Amp Section (1/2)– ........... 25
4-8.   Schematic Diagram – Amp Section (2/2)– ........... 26
4-9.   Printed Wiring Boards – Amp Section– ................ 27
4-10. Schematic Diagram – Display Section– ............... 28
4-11. Printed Wiring Boards – Display Section– ........... 29
4-12. Schematic Diagram – Power Section– .................. 30
4-13. Printed Wiring Boards– Power Section– .............. 31
4-14. IC Block Diagrams ................................................ 32

5-1. Front Panel Section ................................................. 33
5-2. Cabinet Section ........................................................ 34

.................................... 35

Input
VIDEO:

1 Vp-p 75 

Ω

Output
MONITOR:

1 Vp-p 75 

Ω

Hardware decoder

MPEG2
Maximum 8 Mbps, 720 x 480 pixels, 30 fps
MPEG1
1.41 Mbps, 352 x 240 pixels, 30 fps

Playable file formats

Giga Pocket video
MPEG2, MPEG1
SonicStage music
ATRAC3, ATRAC3plus,WAV, MP3. WMA is
not supported.
Photo Server images
BMP, TIFF, GIF, JPEG,PNG

Interface

Network
100Base-TX

Compatible computers

VAIO computers bought after October 2003,
running Windows XP
Professional or Windows
XP Home Edition

Power requirements

230 V AC, 50/60 Hz

Power consumption

95 W

Dimensions

 430 x 65 x 288 mm
including projections and controls

Mass (approx.)

3.2 kg

AM loop antenna (1)
Allen screwdriver (1)
Connection adapter (1)
Cross-wired cable (1)
FM wire antenna (1)
Network cable (approx. 170 cm, 1)
Network cable ferrite core (1)
R6 (AA) batteries (2)
Remote control (RM-U70R)(1)
Speaker cable ferrite core (2)
Speaker plug (5)

Design and specifications are subject to change without notice.

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.

• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.

3

This section is extracted
from instruction manual.

Display 2

INPUT SELECTOR 3

 

MUTING 6
PHONES jack 8

PRESET TUNING +/– 4
SOUND FIELD 7
VOLUME 5

?/1 (power) 1

1

2

3

5

4

6

7

8

4

1

 remove five screws

     (+BVTP 3x8)

2

isolation sheet

POWER board