Sony STR-DN1000 (serv.man2) Service Manual ▷ View online
STR-DN1000
3
2-3. Procedure for Blu-ray Disc player
1. It connects of step 2-1, and the turn on the main power of set
1. It connects of step 2-1, and the turn on the main power of set
and Blu-ray Disc player.
2. “DVD” is selected by using [INPUT SELECTOR] button.
3. Press the OPEN/CLOSE button of the Blu-ray Disc player, and
3. Press the OPEN/CLOSE button of the Blu-ray Disc player, and
DVD test disc “HLX-504 (Part No. J-6090-088-A)” or “HLX-
513 (Part No. J-2501-305-A)” is insert. The disc playback au-
tomatically becomes start “Main Menu” is display.
513 (Part No. J-2501-305-A)” is insert. The disc playback au-
tomatically becomes start “Main Menu” is display.
4. “1.Color Bar 100%” of “1.Video Signal” is reproduced, and
100% in the color bar is displayed in the TV monitor, playing
the Blu-ray Disc player is pause playback.
the Blu-ray Disc player is pause playback.
5. Press the [
?/1
] button to turn off the main power of the set.
6. While pressing the [DISPLAY] and [MOVIE] buttons, press
the [
?/1
] button to turn on the main power of the set. When
correctly entering the test mode “V.CAL COMPLETE N:P:H”
is displayed (keeps pressing two buttons until the message ap-
pears).
is displayed (keeps pressing two buttons until the message ap-
pears).
7. The NTSC signal adjustment is begun when press the cross
(center of cursor) button of remote commander, and the dis-
play changes from “NTSC:MW -----” to “NTSC:MW OK C S
V E” little by little. Finally, the display returns to the display of
“V.CAL COMPLETE N:P:H”.
play changes from “NTSC:MW -----” to “NTSC:MW OK C S
V E” little by little. Finally, the display returns to the display of
“V.CAL COMPLETE N:P:H”.
8. Press the OPEN/CLOSE button of the Blu-ray Disc player, and
change to DVD test disc “HLX-506 (Part No. J-6090-077-A)”
or “HLX-507 (Part No. J-6090-078-A)”. The disc playback au-
tomatically becomes start “Main Menu” is display.
or “HLX-507 (Part No. J-6090-078-A)”. The disc playback au-
tomatically becomes start “Main Menu” is display.
9. “1.Color Bar 100%” of “1.Video Signal” is reproduced, and
100% in the color bar is displayed in the TV monitor, playing
the Blu-ray Disc player is pause playback.
the Blu-ray Disc player is pause playback.
10. The PAL signal adjustment is begun when press the cross (cen-
ter of cursor) button of remote commander. Finally, the display
returns to the display of “V.CAL COMPLETE N:P:H”.
returns to the display of “V.CAL COMPLETE N:P:H”.
11. Press the OPEN/CLOSE button of the Blu-ray Disc player, and
change to DVD test disc “HLX-104 (Part No. J-6090-199-A)”.
The disc playback automatically becomes start “Main Menu”
is display.
The disc playback automatically becomes start “Main Menu”
is display.
12. “59.94Hz, 1080i”
→ “1.Video Signal” → “1.Color Bar 100%”
is selected, and 100% in the color bar is displayed in the TV
monitor, playing the Blu-ray Disc player is pause playback.
monitor, playing the Blu-ray Disc player is pause playback.
13. The video output of the Blu-ray Disc player is switched 1080i
(The output from the component terminal of the Blu-ray Disc
player becomes 1080i output).
player becomes 1080i output).
14. The HD signal adjustment is begun when press the cross (cen-
ter of cursor) button of remote commander. Finally, the display
returns to the display of “V.CAL COMPLETE N:P:H”.
returns to the display of “V.CAL COMPLETE N:P:H”.
15. The turn off the main power.
STR-DN1000
REVISION HISTORY
Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2009.06
New
1.1
2009.08
Change of TEST MODE contents
Change of DISPLAY, HEADPHONE, POWER KEY, STANDBY DCDC and VIDEO boards (Suffi x-13)
(SMR-09039)
1.2
2009.11
Change of Ref. No. for F902 on AC SELECT board
Addition of Parts No. for Ref. No. C301 and TP300 on HEADPHONE board
Change of Part No. for Ref. No. J300 on HEADPHONE board
Addition of CONVERSION ADAPTOR (Chilean and Peruvian models)
Change of Part No. for REMOTE COMMANDER
Addition of VIDEO CALIBRATION ADJUSTMENT (Supplement-1)
(SMR-09072)
STR-DN1000
REVISION HISTORY
Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2009.06
New
1.1
2009.08
Change of TEST MODE contents
Change of DISPLAY, HEADPHONE, POWER KEY, STANDBY DCDC and VIDEO boards (Suffi x-13)
(SMR-09039)
1.2
2009.11
Change of Ref. No. for F902 on AC SELECT board
Addition of Parts No. for Ref. No. C301 and TP300 on HEADPHONE board
Change of Part No. for Ref. No. J300 on HEADPHONE board
Addition of CONVERSION ADAPTOR (Chilean and Peruvian models)
Change of Part No. for REMOTE COMMANDER
Addition of VIDEO CALIBRATION ADJUSTMENT (Supplement-1)
(SMR-09072)
STR-DN1000
REVISION HISTORY
Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2009.06
New
1.1
2009.08
Change of TEST MODE contents
Change of DISPLAY, HEADPHONE, POWER KEY, STANDBY DCDC and VIDEO boards (Suffi x-13)
(SMR-09039)
1.2
2009.11
Change of Ref. No. for F902 on AC SELECT board
Addition of Parts No. for Ref. No. C301 and TP300 on HEADPHONE board
Change of Part No. for Ref. No. J300 on HEADPHONE board
Addition of CONVERSION ADAPTOR (Chilean and Peruvian models)
Change of Part No. for REMOTE COMMANDER
Addition of VIDEO CALIBRATION ADJUSTMENT (Supplement-1)
(SMR-09072)
Display