Sony STR-DK5 Service Manual ▷ View online
7
STR-DK5
2-2. FRONT PANEL SECTION
2-3. BACK PANEL SECTION
1
CNP200 (10P)
2
flexible flat cable (23 core)
(CNS505)
3
five screws
(+BVTP 3
×
8)
4
front panel section
1
CNP904 (2P)
2
CNP551 (9P)
3
flexible flat cable (7 core)
(CNS503)
4
flexible flat cable (11 core)
(CNS508)
0
two screws
(+BVTP 3
×
8)
5
four screws
(+BVTP 3
×
8)
6
three screws
(+BVTP 3
×
8)
7
two screws
(+BVTP 3
×
8)
8
screw
(+BVTP 3
×
8)
9
screw
(+BVTP 3
×
8)
qa
back panel section
Ver. 1.1
8
STR-DK5
2-4. DIGITAL BOARD
2-5. MAIN BOARD
1
CNP505 (8P)
2
CNP503 (4P)
3
CNP504 (5P)
CNP501
CNP502
4
screw
(+BVTP 3
×
8)
5
screw
(+BVTP 3
×
8)
6
bracket (digital)
7
DIGITAL board
2
CNP801 (5P)
1
CNP916 (5P)
3
CNP901 (3P)
4
CNP902 (5P)
8
MAIN board
5
two screws
(+BV3 (3-CR))
6
two screws
(+BV3 (3-CR))
7
screw
(+BV3 (3-CR))
9
STR-DK5
2-6. STANDBY BOARD
1
CNP916 (5P)
2
CNP801 (5P)
3
CNP904 (2P)
4
CNP903 (3P)
5
three screws
(+BVTP 3
×
8)
6
STANDBY board
10
STR-DK5
SECTION 3
TEST MODE
FACTORY PRESET MODE
* All preset contents are reset to the default setting.
* Procedure:
* Procedure:
While depressing the [2CH] and the [MOVIE] buttons
simultaneously, press the
simultaneously, press the
?/1
button to turn on the main power.
The message “FACTORY” appears for a moment and the present
contents are reset to the default values.
contents are reset to the default values.
SPEAKER SIZE SELECTION MODE
* Either the normal speaker or micro satellite speaker can be
selected.
* Procedure:
While depressing the [DISPLAY] and the [TUNING ---] buttons
simultaneously, press the
simultaneously, press the
?/1
button to turn on the main power.
Either the message “NORM. SP.” or “MICRO SP.” appears for a
moment and select the desired speaker size.
moment and select the desired speaker size.
VACUUM FLUORESCENT DISPLAY TEST MODE
* All fluorescent segments are tested.
When this test is activated, all segments light on at the same
time, then each segment lights on one after another.
time, then each segment lights on one after another.
* Procedure:
While depressing the [DISPLAY] and the [A.F.D.] buttons
simultaneously, press the
simultaneously, press the
?/1
button to turn on the main power.
1. ALL segments light on.
[KARAOKE ON/OFF], [VOCAL SELECT], [SCORE] and [D.B.F.B.]
LED light on.
LED light on.
2. Turn the [INPUT SELECTOR] control, confirm display.
[KARAOKE ON/OFF] and [SCORE] LED light on.
3. Turn the [INPUT SELECTOR] control, confirm display.
[VOCAL SELECT] and [D.B.F.B.] LED light on.
4. Turn the [INPUT SELECTOR] control, all segments and all LEDs
light off.
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
completion of repair.
* Procedure:
While depressing the [2CH] button, press the
?/1
button to turn
on the main power.
The message “SF. CLR.” appears for a moment and
initialization is performed.
The message “SF. CLR.” appears for a moment and
initialization is performed.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
* Procedure:
While depressing the [DISPLAY] and the [TUNING +] buttons
simultaneously, press the
simultaneously, press the
?/1
button to turn on the main power.
The model name, destination and the software version are
displayed for a moment.
displayed for a moment.
KEY CHECK MODE
* Button check
* Procedure:
* Procedure:
While depressing the [DISPLAY] and the [2CH] buttons
simultaneously, press the
simultaneously, press the
?/1
button to turn on the main power.
Either the message “REST 15” appears.
Every pressing of any button other than the
Every pressing of any button other than the
?/1
counts down
the buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed “REST 00” appears.
counted again. When all buttons are pressed “REST 00” appears.
COMMAND MODE SELECTION MODE
* The command mode (AV1 or AV2) of the remote commander
can be selected.
* Procedure:
While depressing the [TUNING ---] button, press the
?/1
button
to turn on the main power.
Either the message “C.MODE.AV 1” or “C.MODE.AV 2”
appears for a moment and select the desired mode.
Either the message “C.MODE.AV 1” or “C.MODE.AV 2”
appears for a moment and select the desired mode.
L
SW
C
R
SL
S
SR
SBL SB SBR
LFE
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D D
D D
dB
kHz
mft.
MHz
MEMORY
DIRECT
L
SW
R
S
SB
LFE
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D D
D D
dB
kHz
mft.
MHz
MEMORY
DIRECT
C
SL
SR
SBL
SBR
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D D
D D
kHz
mft.
MHz
MEMORY
DIRECT
Click on the first or last page to see other STR-DK5 service manuals if exist.