DOWNLOAD Sony STR-DA6400ES (serv.man3) Service Manual ↓ Size: 30.52 KB | Pages: 2 in PDF or view online for FREE

Note: When this confi rmation is executed, IP address is changed.

Necessary machinery and materials:
• 

PC (Windows XP/Vista)

• Router
 

(Transmission rate is 100 Mbps or more, built-in DHCP server 
function)

• 

Two LAN cables

 

(Category 5 cable, normal type or shield type)

• Monitor
• 

Multifunction remote commander

 (RM-AAL012)

Connection:
(The router need not be connected with the internet)

Procedure:
1.  The setting of LAN of PC is setting to the automatic IP address 

assignment. 

 

It changes to the setting that displays the image in the monitor.

2.  The above-mentioned connection is done. 
3.  The power supply of the router is turn on, next, the power sup-

ply of PC and the set is turn on.

4.  Press the [GUI MODE] button of the remote commander, the 

GUI screen is displayed in the monitor.

5.  The “Settings” is selected on the GUI screen. 
 

Next, “Network Setup” in “Network” is selected, and press the 
[ENTER] button of remote commander.

6.  When the network setting is a unsetting, “Next” is selected on 

the screen of “Start Network function initial Setup Wizard”, 
and press the [ENTER] button of remote commander.

 

When it has already been set, “Internet Setup” is selected on 
the screen of “Select Setup item”, and press the [ENTER] but-
ton of remote commander. 

7.  “Connect Automatically (DHCP)” is selected on the screen of 

“Confi gures network settings automatically or manually”, and 
press the [ENTER] button of remote commander.

8.  The automatically connect function operates, it becomes the 

screen of “Success!” tens of seconds later, the confi rmation 
ends when “Finish” is selected.

NOTE  OF  REPLACING  THE  NETWORK  BOARD
When the NETWORK board is exchanged, the MAC address has 
been changed.
Please print and cut out the following explanations, and return it 
with the set that completes the repair.

MAC address of this receiver has been changed by this repair. 
The customer who uses the MAC address fi ltering function of 
connected access point equipment please set it again. MAC ad-
dress is possible to confi rm it on the network setting screen of ES 
utility of an attachment application. 

Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.

1.0

2008.10

New

1.1

2009.03

Addition of AEP and UK models (Refer to SUPPLEMENT-1 for MAIN board (Suffi x-22))

Change of AC, D CONNECT, E-VOL and FILTER boards (Combined Suffi x-12)

Change of A-VIDEO board (Suffi x-13)

Change of BIAS, CONNECTOR1, CONNECTOR2, PROTECTOR (F-C), PROTECTOR (SB), 

PROTECTOR (SURR) and TEMPERATURE DETECTION boards (Combined Suffi x-13) 

Change of ANALOG and CIS boards (Suffi x-12) (SUPPLEMENT-1)

Change of A-CLASS AMP and POWER AMP boards (Suffi x-13) (SUPPLEMENT-1) 

(SMR-08190)

1.2

2009.05

Change of “VIDEO CALIBRATION ADJUSTMENT” on ELECTRICAL ADJUSTMENT 

(SMR-09012)

1.3

2009.11

Deletion of Part No. for Ref. No. IC3601 and IC3606 on D VIDEO board (not supplied) 

Deletion of Part No. for Ref. No. IC8005 on NETWORK board (not supplied) 

Addition of CONFIRMATION OF NETWORK OPERATION (SUPPLEMENT-2) 

Addition of NOTE OF REPLACING THE NETWORK BOARD (SUPPLEMENT-2) 

(SMR-09071)