DOWNLOAD Sony STR-DA5800ES Service Manual ↓ Size: 25.81 MB | Pages: 127 in PDF or view online for FREE

Note: When this confi rmation is executed, IP address is changed.

Necessary machinery and materials:
• 

PC (Windows XP/Vista)

• Router
 

(Transmission rate is 100 Mbps or more, built-in DHCP server 
function)

• 

Two LAN cables

 

(Category 5 cable, normal type or shield type)

• Monitor
• 

Supplied remote commander (RM-AAU154)

 

(US and Canadian models)

• 

Supplied multifunction remote commander (RM-AAL042)

 

(AEP, UK and Taiwan models)

Connection:
(The router need not be connected with the internet)

Procedure:
1.  The setting of LAN of PC is setting to the automatic IP address 

assignment. 

 

It changes to the setting that displays the image in the monitor.

2.  Perform connection with reference to connection fi gure.
3.  The power supply of the router is turn on, next, the power sup-

ply of PC and this unit is turn on.

4.  Press the [HOME] button of the remote commander, the home 

menu is displayed in the monitor.

5.  The “Settings” is selected on the home menu, and press the [

] 

button of remote commander.

6.  The “Network Settings” is selected , and press the [

] button 

of remote commander.

7.  The “Internet Settings” is selected , and press the [

] button of 

remote commander.

8.  The “Network Setup” is selected , and press the [

] button of 

remote commander.

9.  The “Auto” is selected , and press the [

] button of remote 

commander.

10. The “The network will be confi gured with the following set-

tings.” is displayed, and press the [

,

] button of remote com-

mander.

11.  The “Save & Connect” is selected , and press the [

] button of 

remote commander.

12. The automatically connect function is performed.
13. Confi rm that the “Internet Access:   OK” has been displayed,  

and press the [

] button of remote commander.

14. Press the [\/1] button to turn off the main power.

NOTE  OF  REPLACING  THE  COMPLETE NETWORK  
BOARD
When the complete NETWORK board is exchanged, the MAC ad-
dress has been changed.
Please print and cut out the following explanations, and return it 
with the unit that completes the repair.

MAC address of this receiver has been changed by this repair. 
The customer who uses the MAC address fi ltering function of 
connected access point equipment please set it again. MAC ad-
dress is possible to confi rm it on the System Information screen 
of this unit. Please refer to “Adjusting Settings” on the operating 
instructions for details.

NOTE  OF  REPLACING  THE  COMPLETE  USB-DDC  
BOARD (AEP, UK and Taiwan models only)
When this unit is connected with PC, this unit is recognized as a 
USB audio device on PC. At this time, the manufacture maker’s 
information, etc. (USB descriptor) are transmitted to PC from this 
unit. The USB descriptor is stored in the IC102 on the USB-DDC 
board, and it is written in at the factory.
When the complete USB-DDC board is exchanged, do the follow-
ing work.

1. Preparation
Prepare the following before beginning work.

• 

Windows PC (Windows XP)

Note 1: Vendor does not guarantee operation by other OS’s.

• 

Driver software for STR-DA5800ES

Note 2: Install this driver software in the above PC in advance. Confi rm 

the method of obtaining the driver software to each service head-

quarters.

• 

USB cable (A type plug to B type plug)

• 

Writing utility software (.exe fi le)

• 

USB descriptor defi nition fi le (.hex fi le)

Note 3: Confi rm the method of obtaining the writing utility software and 

USB descriptor defi nition fi le to each service headquarters.

Procedure:
1.  Assemble new USB-DDC board to this unit.
2.  Connect PC and this set with USB cable.

3.  Press the [\/1] button on this unit to turn on the main power.
 

(It is not necessary to wait for memory clearing)

4. Run 

the 

writing utility software on PC.

5.  Select the “USB\Vid_0d8c&Pid_5200&Rev_0100” on “De-

vice menu” pull-down list of the writing utility software.

USB/Vid_0d8c&Pid_5200&Rev_0100

6.  Click the “Update FW” button of the writing utility software 

on PC and open the USB descriptor defi nition fi le.

USB/Vid_0d8c&Pid_5200&Rev_0100

Update FW

Update Firmware

Release_0605

6631-XXXX-SonySTR-ALL.hex

Firmware File

6631-XXXX-SonySTR-ALL.hex

Open

7.  “Update Firmware” window appears, and click the “OK” but-

ton.

Cancel

OK

Start To Update Firmware.
Old Version: New Version:XXXX

8.  After “Update Firmware” window disappears, wait for about 5 

to 10 seconds.

9.  After about 5 to 10 seconds, “FWUpdate” window appears, 

and click the “OK” button.

OK

Firmware Update Finished

Device will be reset.

10. The writing of the USB descriptor to the IC102 on the USB-

DDC board is completed.

Procedure:
1.  Open the Device Manager of windows on PC.
2.  Expand the “Sound, video and game controllers”, and right-

click on the “AV Amplifi er/Receiver” and select the “Proper-
ties”.

SSF0250

AV Amplifier/Receiver

Properties

Update Driver...

Scan for hardware changes

3.  Click the “Details” tab, and select the “Hardware Ids” from pull-

down list on Property. Check that the part surrounded by the 
dotted line of the following fi gure is “VID_054C&PID_06CF”.

Property

Value

Hardware Ids

USB\VID_054C&PID_06CF&REV_0103&MI_00
USB\VID_054C&PID_06CF&MI_00

Audio Amplifier/Receiver

4.  The checking was completed.

XXXX: Version display

XXXX: Version display

1

2.00_20_M

J-2501-372-A

2.0

10

For E-VOL board (CN1201)

2.00_20_M

For A-CLASS_AMP board (CN1504)

PH cable 10P

Length 400 mm

2

2.00_20_M

J-2501-373-A

2.0

19

For E-VOL board (CN1202)

2.00_20_M

For A-CLASS_AMP board (CN1505)

PH cable 10P

Length 400 mm

PH cable 10P

Length 400 mm

3

2.00_15_M

J-2501-366-A

2.0

15

For E-VOL board (CN1203)

2.00_15_M

For MAIN board (CN1203)

PH cable 15P

Length 400 mm

4

2.00_20_M

J-2501-367-A

2.0

20

For E-VOL board (CN1204)

2.00_20_M

For MAIN board (CN1204)

PH cable 10P

Length 400 mm

PH cable 10P

Length 400 mm

E-VOL  BOARD  SERVICE  POSITION
• 

Please connect following extension jig.

Connect extension jig 2 to the 
A-CLASS_AMP board (CN1505) 
and E-VOL board (CN1202).

Connect extension jig 3 to the 
MAIN board (CN1203) 
and E-VOL board (CN1203).

Connect extension jig 1 to the 
A-CLASS_AMP board (CN1504) 
and E-VOL board (CN1201).

Connect extension jig 4 to the 
MAIN board (CN1204) 
and E-VOL board (CN1204).

alligator clip
Note: Connect altogether the metal part
 

on the boards connected with the

 

chassis using the alligator clip.

5

1.25_14_M

J-2501-344-A

1.25

14

For CONTROL board (CN2701)

1.25_14_F

For MAIN board (CN1006)

Flexible fl at cable 14P

J-2501-361-A

Length 300 mm

6

1.25_22_M

J-2501-350-A

1.25

22

For CONTROL board (CN2721)

1.25_22_F

For MAIN board (CN1005)

Flexible fl at cable 22P

J-2501-364-A

Length 300 mm

7

1.25_26_F

J-2501-356-A

1.25

26

For CONTROL board (CN2891)

1.25_26_F

For D-AUDIO board (CN2202)

Flexible fl at cable 26P

J-2501-365-A

Length 300 mm

8

1.25_14_F

J-2501-354-A

1.25

14

For CONTROL board (CN2921)

1.25_14_F

For D-AUDIO board (CN2201)

Flexible fl at cable 14P

J-2501-361-A

Length 300 mm

CONTROL  BOARD  SERVICE  POSITION
• 

Please connect following extension jig.

Connect extension jig 6
to the CONTROL board (CN2721) 
and MAIN board (CN1005).

Connect extension jig 5
to the CONTROL board (CN2701) 
and MAIN board (CN1006).

Connect extension jig 8
to the CONTROL board (CN2921) 
and D-AUDIO board (CN2201).

Connect extension jig 7
to the CONTROL board (CN2891) 
and D-AUDIO board (CN2202).

alligator clip
Note: Connect altogether the metal part
 

on the boards connected with the

 

chassis using the alligator clip.