Sony STR-DA5800ES (serv.man3) Service Manual ▷ View online
STR-DA5800ES
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2012.09
New
1.1
2012.12
Deletion of Part No. for IC2601 on the NETWORK board
Change of SPTM board (Suffi x-22)
Change of Part No. for R1501, R1502, R1505 to R1507, R1551, R1552, R1555 to R1557, R1601, R1602,
R1605 to R1607, R1701, R1702, R1705 to R1707, R1751, R1752, R1755 to R1757, R1801, R1802,
R1805 to R1807, R1851, R1852 and R1855 to R1857 on the A-CLASS_AMP board
Change of Part No. for CN2861 on the CONTROL board
Change of Part No. for FB2001 and FB2002 on the D-AUDIO board
Change of Part No. for CN3510 on the D-VIDEO board
Change of Part No. for CN807 on the HAT board
Change of Part No. for R1521, R1522, R1524, R1571, R1572, R1574, R1621, R1622, R1624, R1721,
R1722, R1724, R1771, R1772, R1774, R1821, R1822, R1824, R1871, R1872, R1874, R4401, R4402,
R4405 to R4407, R4421, R4422, R4424, R4451, R4452, R4455 to R4457, R4471, R4472 and R4474 on
the SB-AMP_BIAS board
Change of Part No. for VIDEO CONTROLLER (AV MOUSE) (US and Canadian models)
Change of Part No. for ANTENNA (FM) (AEP and UK models)
Addition of TROUBLESHOOTING (SUPPLEMENT-1)
Change of MAIN board (Suffi x-22) (SUPPLEMENT-1)
(SMR-12056)
1.2
2013.04
Addition of Taiwan model
Change of A-CLASS_AMP, AMP_CONNECT-2, BIAS_CONNECT-1, BIAS_CONNECT-2,
D-AU CONNECT, POWER_TR, SB-AMP_BIAS, SB-SPTM and STBY boards (Suffi x-12)
Deletion of USB-CONNECT board (AEP and UK models)
Change of Part No. for IC2501 on the CONTROL board (AEP and UK models)
Change of Part No. for IC763 on the DISPLAY board (AEP and UK models)
Change of Part No. for IC3000 on the D-VIDEO board (AEP and UK models)
Change of Part for IC2501 on the NETWORK board (US and Canadian models)
Change of AMP_CONNECT-1, D-VIDEO, E-VOL, PROTECTOR_FC, PROTECTOR_FH,
PROTECTOR_SR, SUB D-VIDEO and USB-DDC boards (Suffi x-12) (SUPPLEMENT-2)
(SMR-12073)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
STR-DA5800ES
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2012.09
New
1.1
2012.12
Deletion of Part No. for IC2601 on the NETWORK board
Change of SPTM board (Suffi x-22)
Change of Part No. for R1501, R1502, R1505 to R1507, R1551, R1552, R1555 to R1557, R1601, R1602,
R1605 to R1607, R1701, R1702, R1705 to R1707, R1751, R1752, R1755 to R1757, R1801, R1802,
R1805 to R1807, R1851, R1852 and R1855 to R1857 on the A-CLASS_AMP board
Change of Part No. for CN2861 on the CONTROL board
Change of Part No. for FB2001 and FB2002 on the D-AUDIO board
Change of Part No. for CN3510 on the D-VIDEO board
Change of Part No. for CN807 on the HAT board
Change of Part No. for R1521, R1522, R1524, R1571, R1572, R1574, R1621, R1622, R1624, R1721,
R1722, R1724, R1771, R1772, R1774, R1821, R1822, R1824, R1871, R1872, R1874, R4401, R4402,
R4405 to R4407, R4421, R4422, R4424, R4451, R4452, R4455 to R4457, R4471, R4472 and R4474 on
the SB-AMP_BIAS board
Change of Part No. for VIDEO CONTROLLER (AV MOUSE) (US and Canadian models)
Change of Part No. for ANTENNA (FM) (AEP and UK models)
Addition of TROUBLESHOOTING (SUPPLEMENT-1)
Change of MAIN board (Suffi x-22) (SUPPLEMENT-1)
(SMR-12056)
1.2
2013.04
Addition of Taiwan model
Change of A-CLASS_AMP, AMP_CONNECT-2, BIAS_CONNECT-1, BIAS_CONNECT-2,
D-AU CONNECT, POWER_TR, SB-AMP_BIAS, SB-SPTM and STBY boards (Suffi x-12)
Deletion of USB-CONNECT board (AEP and UK models)
Change of Part No. for IC2501 on the CONTROL board (AEP and UK models)
Change of Part No. for IC763 on the DISPLAY board (AEP and UK models)
Change of Part No. for IC3000 on the D-VIDEO board (AEP and UK models)
Change of Part for IC2501 on the NETWORK board (US and Canadian models)
Change of AMP_CONNECT-1, D-VIDEO, E-VOL, PROTECTOR_FC, PROTECTOR_FH,
PROTECTOR_SR, SUB D-VIDEO and USB-DDC boards (Suffi x-12) (SUPPLEMENT-2)
(SMR-12073)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
STR-DA5800ES
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2012.09
New
1.1
2012.12
Deletion of Part No. for IC2601 on the NETWORK board
Change of SPTM board (Suffi x-22)
Change of Part No. for R1501, R1502, R1505 to R1507, R1551, R1552, R1555 to R1557, R1601, R1602,
R1605 to R1607, R1701, R1702, R1705 to R1707, R1751, R1752, R1755 to R1757, R1801, R1802,
R1805 to R1807, R1851, R1852 and R1855 to R1857 on the A-CLASS_AMP board
Change of Part No. for CN2861 on the CONTROL board
Change of Part No. for FB2001 and FB2002 on the D-AUDIO board
Change of Part No. for CN3510 on the D-VIDEO board
Change of Part No. for CN807 on the HAT board
Change of Part No. for R1521, R1522, R1524, R1571, R1572, R1574, R1621, R1622, R1624, R1721,
R1722, R1724, R1771, R1772, R1774, R1821, R1822, R1824, R1871, R1872, R1874, R4401, R4402,
R4405 to R4407, R4421, R4422, R4424, R4451, R4452, R4455 to R4457, R4471, R4472 and R4474 on
the SB-AMP_BIAS board
Change of Part No. for VIDEO CONTROLLER (AV MOUSE) (US and Canadian models)
Change of Part No. for ANTENNA (FM) (AEP and UK models)
Addition of TROUBLESHOOTING (SUPPLEMENT-1)
Change of MAIN board (Suffi x-22) (SUPPLEMENT-1)
(SMR-12056)
1.2
2013.04
Addition of Taiwan model
Change of A-CLASS_AMP, AMP_CONNECT-2, BIAS_CONNECT-1, BIAS_CONNECT-2,
D-AU CONNECT, POWER_TR, SB-AMP_BIAS, SB-SPTM and STBY boards (Suffi x-12)
Deletion of USB-CONNECT board (AEP and UK models)
Change of Part No. for IC2501 on the CONTROL board (AEP and UK models)
Change of Part No. for IC763 on the DISPLAY board (AEP and UK models)
Change of Part No. for IC3000 on the D-VIDEO board (AEP and UK models)
Change of Part for IC2501 on the NETWORK board (US and Canadian models)
Change of AMP_CONNECT-1, D-VIDEO, E-VOL, PROTECTOR_FC, PROTECTOR_FH,
PROTECTOR_SR, SUB D-VIDEO and USB-DDC boards (Suffi x-12) (SUPPLEMENT-2)
(SMR-12073)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
STR-DA5800ES
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2012.09
New
1.1
2012.12
Deletion of Part No. for IC2601 on the NETWORK board
Change of SPTM board (Suffi x-22)
Change of Part No. for R1501, R1502, R1505 to R1507, R1551, R1552, R1555 to R1557, R1601, R1602,
R1605 to R1607, R1701, R1702, R1705 to R1707, R1751, R1752, R1755 to R1757, R1801, R1802,
R1805 to R1807, R1851, R1852 and R1855 to R1857 on the A-CLASS_AMP board
Change of Part No. for CN2861 on the CONTROL board
Change of Part No. for FB2001 and FB2002 on the D-AUDIO board
Change of Part No. for CN3510 on the D-VIDEO board
Change of Part No. for CN807 on the HAT board
Change of Part No. for R1521, R1522, R1524, R1571, R1572, R1574, R1621, R1622, R1624, R1721,
R1722, R1724, R1771, R1772, R1774, R1821, R1822, R1824, R1871, R1872, R1874, R4401, R4402,
R4405 to R4407, R4421, R4422, R4424, R4451, R4452, R4455 to R4457, R4471, R4472 and R4474 on
the SB-AMP_BIAS board
Change of Part No. for VIDEO CONTROLLER (AV MOUSE) (US and Canadian models)
Change of Part No. for ANTENNA (FM) (AEP and UK models)
Addition of TROUBLESHOOTING (SUPPLEMENT-1)
Change of MAIN board (Suffi x-22) (SUPPLEMENT-1)
(SMR-12056)
1.2
2013.04
Addition of Taiwan model
Change of A-CLASS_AMP, AMP_CONNECT-2, BIAS_CONNECT-1, BIAS_CONNECT-2,
D-AU CONNECT, POWER_TR, SB-AMP_BIAS, SB-SPTM and STBY boards (Suffi x-12)
Deletion of USB-CONNECT board (AEP and UK models)
Change of Part No. for IC2501 on the CONTROL board (AEP and UK models)
Change of Part No. for IC763 on the DISPLAY board (AEP and UK models)
Change of Part No. for IC3000 on the D-VIDEO board (AEP and UK models)
Change of Part for IC2501 on the NETWORK board (US and Canadian models)
Change of AMP_CONNECT-1, D-VIDEO, E-VOL, PROTECTOR_FC, PROTECTOR_FH,
PROTECTOR_SR, SUB D-VIDEO and USB-DDC boards (Suffi x-12) (SUPPLEMENT-2)
(SMR-12073)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
