Sony STR-DA2400ES / STR-DG920 Service Manual ▷ View online
STR-DA2400ES/DG920
9
Status of the POWER button
Y
(Off)
The receiver is turned off (initial setting).
Press POWER to turn the receiver on.
You cannot turn the receiver on using the
remote.
Press POWER to turn the receiver on.
You cannot turn the receiver on using the
remote.
To remove the cover
Press PUSH.
When you remove the cover, keep it out of
reach from children.
When you remove the cover, keep it out of
reach from children.
SPEAKERS
(OFF/A/B/A+B)
PHONES
VIDEO 2 IN/PORTABLE AV IN
VIDEO
L AUDIO R
AUTO CAL MIC
MEMORY/
ENTER
2CH/
A.DIRECT
A.F.D.
MOVIE
MUSIC
DIMMER
MULTI CHANNEL DECODING
INPUT SELECTOR
TONE MODE
ON/STANDBY
TUNING MODE
POWER
TUNING
DISPLAY
INPUT MODE
MASTER VOLUME
TONE
RB
R
RT
RG
RE
RH
RI
RM
X
RK
RL
(DG920)
Y
(On/Standby)
Press
/
on the remote to turn the receiver on
or set it to the standby mode.
When you press POWER on the receiver, the
receiver will be turned off.
When you press POWER on the receiver, the
receiver will be turned off.
Name
Function
Name
Function
/ 2CH/A.DIRECT
Press to select a sound field.
A.F.D.
MOVIE
MUSIC
0 DIMMER
Press to adjust the
brightness of the display.
brightness of the display.
1 MEMORY/
ENTER
Press to store a station or
enter the selection when
selecting the settings.
enter the selection when
selecting the settings.
2 AUTO CAL MIC
jack
Connects to the supplied
optimizer microphone for
the Auto Calibration
function.
optimizer microphone for
the Auto Calibration
function.
3 VIDEO 2 IN/
PORTABLE AV
IN jacks
IN jacks
Connects to a portable
audio/video component
such as a camcorder or
video game.
audio/video component
such as a camcorder or
video game.
4 PHONES jack
Connects to headphones.
5 SPEAKERS
(OFF/A/B/A+B)
Press to select the speaker
system.
system.
Name
Function
" ON/STANDBY
lamp
Lights up in green when the
receiver is turned on.
Lights up in red when the
receiver is set to standby
mode.
receiver is turned on.
Lights up in red when the
receiver is set to standby
mode.
# POWER
Press to turn the receiver on
or off.
or off.
$ TONE MODE
Adjusts the tonal quality
(bass/treble level) of the
front, center and surround
speakers.
Press TONE MODE
repeatedly to select bass or
treble level, then turn
TONE +/– to adjust the
level.
(bass/treble level) of the
front, center and surround
speakers.
Press TONE MODE
repeatedly to select bass or
treble level, then turn
TONE +/– to adjust the
level.
TONE +/–
% TUNING +/–
Turn to scan a station.
& TUNING MODE
Press to select the tuning
mode.
mode.
' Remote sensor
Receives signals from
remote commander.
remote commander.
( MULTI
CHANNEL
DECODING lamp
DECODING lamp
Lights up when multi
channel audio signals are
decoded.
channel audio signals are
decoded.
) Display
The current status of the
selected component or a list
of selectable items appears
here.
selected component or a list
of selectable items appears
here.
* DISPLAY
Press to select information
displayed on the display.
displayed on the display.
+ INPUT MODE
Press to select the input
mode when the same
components are connected
to both digital and analog
jacks.
mode when the same
components are connected
to both digital and analog
jacks.
, MASTER
VOLUME
Turn to adjust the volume
level of all speakers at the
same time.
level of all speakers at the
same time.
- INPUT
SELECTOR
Turn to select the input
source to playback.
source to playback.
. Digital Cinema
Sound lamp
Lights up when a sound
field with
field with
%$4 is
selected.
Front panel
STR-DA2400ES/DG920
10
" DIGITAL INPUT/OUTPUT section
OPTICAL IN
jacks
jacks
Connects to a DVD
player, etc. The
COAXIAL jack
provides a better
quality sound.
player, etc. The
COAXIAL jack
provides a better
quality sound.
COAXIAL IN
jacks
jacks
HDMI IN/
OUT* jacks
OUT* jacks
Connects to a DVD
player, satellite
tuner, or a Blu-ray
disc player. The
image is output to a
TV or a projector
while the sound can
be output from a TV
or/and speakers
connected to this
receiver.
player, satellite
tuner, or a Blu-ray
disc player. The
image is output to a
TV or a projector
while the sound can
be output from a TV
or/and speakers
connected to this
receiver.
Rear panel
DIGITAL
ASSIGNABLE
ASSIGNABLE (INPUT ONLY)
OPTICAL
IN
OPTICAL
VIDEO 1
IN
COAXIAL
DVD
IN
TV
SAT
IN
SA-CD/
CD
IN
XM
DMPORT
DC5V
0.7A MAX
SAT IN
HDMI
BD IN
DVD IN
VIDEO 1 IN
OUT
MD/TAPE
OUT
IN
IN
TV
IN
AUDIO
IN
VIDEO
IN
SAT
AUDIO
IN
VIDEO
IN
BD
MONITOR
AUDIO
IN
VIDEO
IN
AUDIO
IN
VIDEO
IN
DVD
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
VIDEO 1
MULTI CHANNEL INPUT
SA-CD/
CD
IN
PHONO
SUBWOOFER
FRONT SURROUND SUR BACK SUBWOOFER
CENTER
COMPONENT VIDEO
MONITOR
OUT
COMPO 3
IN
COMPO 2
IN
COMPO 1
IN
Y
P
B
/
C
B
P
R
/
C
R
FRONT A
L
R
FRONT B
L
R
SURROUND
CENTER
L
R
SURROUND BACK
L
R
SPEAKERS
AM
FM
ANTENNA
R
L
R
L
R
L
R
L
R
L
R
L
R
L
SIGNAL
GND
(DG920)
# ANTENNA section
FM
ANTENNA
jack
ANTENNA
jack
Connects to the FM
wire antenna
(aerial) supplied
with this receiver.
wire antenna
(aerial) supplied
with this receiver.
AM
ANTENNA
terminals
ANTENNA
terminals
Connects to the AM
loop antenna
(aerial) supplied
with this receiver.
loop antenna
(aerial) supplied
with this receiver.
XM jack
Connects to the XM
Mini-Tuner and
Home Dock (not
supplied).
Mini-Tuner and
Home Dock (not
supplied).
$ COMPONENT VIDEO INPUT/
OUTPUT section
Y, P
B
/C
B
,
P
R
/C
R
IN/
OUT* jacks
Connects to a DVD
player, TV, satellite
tuner, etc..
player, TV, satellite
tuner, etc..
Green
(Y)
(Y)
Blue
(P
(P
B
/C
B
)
Red
(P
(P
R
/C
R
)
& AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a Super
Audio CD player,
etc..
Audio CD player,
etc..
MULTI
CHANNEL
INPUT jacks
CHANNEL
INPUT jacks
Connect to a Super
Audio CD player,
etc. with an analog
audio jack for 7.1
channel or 5.1
channel sound.
Audio CD player,
etc. with an analog
audio jack for 7.1
channel or 5.1
channel sound.
AUDIO OUT
jack
jack
Connects to
subwoofer.
subwoofer.
White (L)
Red (R)
MULTI CHANNEL INPUT
FRONT SURROUND SUR BACK SUBWOOFER
CENTER
R
L
R
L
Black
* You can watch the selected input image when you
connect the MONITOR OUT or HDMI OUT jack
to a TV. You can operate this receiver using a GUI
(Graphical User Interface).
to a TV. You can operate this receiver using a GUI
(Graphical User Interface).
' VIDEO/AUDIO INPUT/OUTPUT
section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a VCR,
DVD player, etc..
DVD player, etc..
VIDEO IN/
OUT* jacks
OUT* jacks
( DMPORT
DMPORT
jack
jack
Connects to a
DIGITAL MEDIA
PORT adapter.
DIGITAL MEDIA
PORT adapter.
White (L)
Red (R)
Yellow
% SPEAKERS section
Connects to
speakers.
speakers.
RM-AAU039 (DA2400ES)
This remote can only be used to operate the
receiver. You can control the main functions of
the receiver with simple operations using this
remote.
receiver. You can control the main functions of
the receiver with simple operations using this
remote.
Name
Function
" / (on/
standby)
Press to turn a receiver on or off.
# 2CH/
A.DIRECT
Press to select sound field.
A.F.D.
MOVIE
MUSIC
$ GUI MODE
Press to display the GUI menu
on the TV screen.
on the TV screen.
%
7W#C
After pressing GUI MODE
(
(
), press 7/W/#/C to select
the menu items. Then press
to enter the selection.
to enter the selection.
& OPTIONS
Press to display and select items
from option menus.
from option menus.
' MENU
Press to display the menu to
operate the receiver.
operate the receiver.
( DMPORT
Press to operate component
connected to the DIGITAL
MEDIA PORT adapter.
connected to the DIGITAL
MEDIA PORT adapter.
/
Starts play.
Y
Stops play.
/
Skips tracks.
) INPUT
SELECTOR
Press to select the input source
to play back.
to play back.
* MASTER
VOLUME +/–
Press to adjust the volume level.
+ MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
temporarily. Press the button
again to restore the sound.
, RETURN/
EXIT
0
Press to return to the previous
menu or exit the menu.
menu or exit the menu.
- DISPLAY
Press to select information
displayed in the display
window.
displayed in the display
window.
. SLEEP
Press to activate the sleep timer
function and the duration which
the receiver turns off
automatically.
function and the duration which
the receiver turns off
automatically.
Remote commander
DISPLAY
SLEEP
GUI MODE
STR-DA2400ES/DG920
11
• Abbreviation
ECE : Continental European, East European and Russian models
ECE : Continental European, East European and Russian models
You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
You can also program the remote to control
non-Sony audio/video components. For
details, see “Programming the remote”.
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
You can also program the remote to control
non-Sony audio/video components. For
details, see “Programming the remote”.
RM-AAP023
(DG920)
RM-AAP024
(DA2400ES: AEP, ECE, UK, Brazilian, Taiwan)
RM-AAP025
(DA2400ES: US, Canadian)
TOP MENU
TV INPUT
WIDE
MENU
CATEGORY MODE
TUNING
DISC SKIP
TUNING
D.TUNING
CATEGORY
F1
F2
BD/DVD
MODE
GUI
MODE
SLEEP
NIGHT
MODE
RESOLUTION
MUSIC
MOVIE
SIRIUS
XM
MULTI IN
PHONO
DMPORT
HOME
VIDEO 2
VIDEO 1
BD
TUNER
THEATER
AMP
TV
SHIFT
DVD
TV
MD/
TAPE
SA-CD/
CD
A.F.D.
A.DIRECT
2CH/
INPUT
7
8
9
4
5
6
1
2
3
0/10
ENT/MEM
-/--
CLEAR/>10
SAT
K HOME/
MENU
Press to display the menus of
the receiver, VCR, DVD player,
satellite tuner, Blu-ray disc
player, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO on the TV screen.
Then, use
the receiver, VCR, DVD player,
satellite tuner, Blu-ray disc
player, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO on the TV screen.
Then, use
V/v/B/b and
to
perform menu operations.
To display the menus of Sony
TV, press TV (
To display the menus of Sony
TV, press TV (
X) and then
press HOME/MENU.
L ./>
b)
Press to skip tracks of the VCR,
CD player, VCD player, LD
player, DVD player, MD deck,
DAT deck, tape deck, Blu-ray
disc player, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
CD player, VCD player, LD
player, DVD player, MD deck,
DAT deck, tape deck, Blu-ray
disc player, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
m/M
b)
Press to
– search tracks in the forward/
– search tracks in the forward/
backward direction of the CD
player, VCD player, DVD
player, LD player, MD deck,
Blu-ray disc player, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO.
player, VCD player, DVD
player, LD player, MD deck,
Blu-ray disc player, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO.
– fast forward/rewind of the
VCR, DAT deck, or tape
deck.
deck.
N
a)b)
Press to start playback of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc player, PSX, DVD/
VHS COMBO, or DVD/HDD
COMBO.
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc player, PSX, DVD/
VHS COMBO, or DVD/HDD
COMBO.
X
b)
Press to pause playback or
recording of the VCR, CD
player, VCD player, LD player,
DVD player, MD deck, DAT
deck, tape deck, Blu-ray disc
player, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO. (Also starts recording
with components in recording
standby.)
recording of the VCR, CD
player, VCD player, LD player,
DVD player, MD deck, DAT
deck, tape deck, Blu-ray disc
player, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO. (Also starts recording
with components in recording
standby.)
x
b)
Press to stop playback of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc player, PSX, DVD/
VHS COMBO, or DVD/HDD
COMBO.
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc player, PSX, DVD/
VHS COMBO, or DVD/HDD
COMBO.
P TV VOL +/–
Press TV (
X) and then press
TV VOL +/– to adjust the TV
volume level.
volume level.
MASTER
VOL +/–
VOL +/–
Press to adjust the volume level
of all speakers at the same time.
of all speakers at the same time.
Q MUTING
Press to turn off the sound
temporarily. Press MUTING
again to restore the sound.
Press TV (
temporarily. Press MUTING
again to restore the sound.
Press TV (
X), and then press
MUTING to activate the TV’s
muting function.
muting function.
R DISC SKIP
Press to skip disc of the CD
player, VCD player, DVD
player, or MD deck (multi-disc
changer only).
player, VCD player, DVD
player, or MD deck (multi-disc
changer only).
S RETURN/
EXIT
O
Press to
– return to the previous menu.
– exit the menu while the menu
– return to the previous menu.
– exit the menu while the menu
or on-screen guide of the
VCD player, LD player,
DVD player, Blu-ray disc
player, PSX, DVD/VHS
COMBO, or satellite tuner is
displayed on the TV screen.
VCD player, LD player,
DVD player, Blu-ray disc
player, PSX, DVD/VHS
COMBO, or satellite tuner is
displayed on the TV screen.
To return to the previous menu
of Sony TV, press TV (
of Sony TV, press TV (
X) and
then press RETURN/EXIT
O.
T DISPLAY
Press to select information
displayed on the display
window or TV screen of the
VCR, VCD player, LD player,
DVD player, CD player, MD
deck, Blu-ray disc player, PSX,
satellite tuner, DVD/ VHS
COMBO, or DVD/HDD
COMBO.
To select information of Sony
TV, press TV (
displayed on the display
window or TV screen of the
VCR, VCD player, LD player,
DVD player, CD player, MD
deck, Blu-ray disc player, PSX,
satellite tuner, DVD/ VHS
COMBO, or DVD/HDD
COMBO.
To select information of Sony
TV, press TV (
X) and then
press DISPLAY.
U RESOLUTION Press repeatedly to change the
resolution of signals output
from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack.
from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack.
V INPUT
MODE
Press to select the input mode
when the same components are
connected to both digital and
analog jacks.
when the same components are
connected to both digital and
analog jacks.
a)
The number 5, TV CH +, PRESET + and
N
buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
references when operating the receiver.
b)
See the table for information on the buttons that
you can use to control each component.
you can use to control each component.
Notes
s 3ome functions explained in this section may not
work depending on the model.
s 4he above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
component, the above operation may not be
possible or may operate differently than described.
W SHIFT
Press to light up the buttons. It
changes the remote button
function to activate the buttons
with pink printing.
changes the remote button
function to activate the buttons
with pink printing.
X TV
Press to light up the button. It
changes the remote key
function to activate the buttons
with yellow printing. It also
activate the DISPLAY (
changes the remote key
function to activate the buttons
with yellow printing. It also
activate the DISPLAY (
T),
OPTIONS TOOLS (
J),
HOME/MENU (
K),
RETURN/EXIT
O (S),
(
I), and V/v/B/b (I) buttons
to perform menu operations for
Sony TVs only.
Sony TVs only.
Y THEATER
Press to enjoy optimal image
suited for movies and to output
the sound from the speakers
connected to this receiver
automatically.
Note
This button will only function if
your TV is compatible with
Theater Mode. For details, refer
to the operating instructions
supplied with the TV.
suited for movies and to output
the sound from the speakers
connected to this receiver
automatically.
Note
This button will only function if
your TV is compatible with
Theater Mode. For details, refer
to the operating instructions
supplied with the TV.
Z RM SET UP Press to set up the remote.
Name
Function
A AV ?/1
(on/standby)
Press to turn on or off the audio/
video components that the
remote is programmed to
operate.
To turn the TV on or off, press
TV (
video components that the
remote is programmed to
operate.
To turn the TV on or off, press
TV (
X) and then press AV
?/1.
If you press
If you press
?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV
?/1
switch changes automatically
each time you press the input
buttons (
each time you press the input
buttons (
D).
B ?/1
(on/standby)
Press to turn the receiver on or
set it to standby mode.
To turn off all components,
press
set it to standby mode.
To turn off all components,
press
?/1 and
?/1 (A) at
the same time (SYSTEM
STANDBY).
STANDBY).
Saving the power in standby
mode.
When “Control for HDMI”
and “RS-232C Control” is set
to “OFF”.
mode.
When “Control for HDMI”
and “RS-232C Control” is set
to “OFF”.
C AMP
Press to enable the receiver
operation.
operation.
D Input
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components.
You can program the remote to
control non-Sony components
following the steps in
“Programming the remote”.
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components.
You can program the remote to
control non-Sony components
following the steps in
“Programming the remote”.
I
,
V/v/B/b
After pressing AMP (
C), press
HOME/MENU (
K) for
receiver operation, then press
V/
v/B/b to select the settings.
After pressing BD/DVD TOP
MENU (
After pressing BD/DVD TOP
MENU (
O) or BD/DVD
MENU (
O), press V/v/B/b to
select the settings, and then
press
press
to enter the selection.
Press
also to enter the
selection of the receiver, VCR,
satellite tuner, DVD player,
Blu-ray disc player, PSX, DVD/
VHS COMBO, or DVD/HDD
COMBO.
satellite tuner, DVD player,
Blu-ray disc player, PSX, DVD/
VHS COMBO, or DVD/HDD
COMBO.
J OPTIONS
TOOLS
Press to display and select items
from the option menus for
receiver, DVD player, Blu-ray
Disc Player, Satellite tuner and
PSX.
Press TV (
from the option menus for
receiver, DVD player, Blu-ray
Disc Player, Satellite tuner and
PSX.
Press TV (
X) and then
press TOOLS to display the
options of Sony TV.
options of Sony TV.
Name
Function
Name
Function
O BD/DVD
TOP MENU
Press to display the menu or on-
screen guide of the DVD or
Blu-ray disc on the TV screen.
Then, use
screen guide of the DVD or
Blu-ray disc on the TV screen.
Then, use
V/v/B/b and
to
perform menu operations.
BD/DVD
MENU
MENU
Press to display the menu of the
DVD or Blu-ray disc on the TV
screen. Then, use
DVD or Blu-ray disc on the TV
screen. Then, use
V/v/B/b and
to perform menu
operations.
TV INPUT
Press TV (
X) and then press
TV INPUT to select the input
signal (TV input or video
input).
signal (TV input or video
input).
WIDE
Press TV (
X) and then press
WIDE to select the wide picture
mode.
mode.
Name
Function
VIDEO 1
VCR, etc., connected to the
VIDEO 1 jack.
VIDEO 1 jack.
VIDEO 2
Video camera and TV game,
etc., connected to the VIDEO
2 IN/PORTABLE AV IN jack.
etc., connected to the VIDEO
2 IN/PORTABLE AV IN jack.
BD
Blu-ray disc player, etc.,
connected to the BD jack.
connected to the BD jack.
DVD
DVD player, etc., connected
to the DVD jack.
to the DVD jack.
TUNING +/–
Press to scan a station.
D.TUNING
Press to enter direct tuning
mode.
mode.
Bs/sb
Press to replay the previous
scene or fast forward the current
scene of the DVD player, Blu-
ray disc player, DVD/VHS
COMBO, or DVD/HDD
COMBO.
scene or fast forward the current
scene of the DVD player, Blu-
ray disc player, DVD/VHS
COMBO, or DVD/HDD
COMBO.
CATEGORY
+/–
+/–
Press to select a category for
satellite tuner.
satellite tuner.
CATEGORY
MODE
MODE
Press to select the category
mode for satellite tuner.
mode for satellite tuner.
Numeric
buttons
(number 5
buttons
(number 5
a)
)
Press SHIFT (
W) and then
press numeric buttons to
– preset/tune to preset stations.
– select track numbers of the
– preset/tune to preset stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
– select channel numbers of
the VCR, satellite tuner, Blu-
ray disc player, PSX, DVD/
VHS COMBO, or DVD/
HDD COMBO.
ray disc player, PSX, DVD/
VHS COMBO, or DVD/
HDD COMBO.
Press TV (
X), and then press
the numeric buttons to select the
TV channels.
TV channels.
ENT/MEM
Press SHIFT (
W) and then
press ENT/MEM to
– enter the value after selecting
– enter the value after selecting
a channel, disc or track using
the numeric buttons of the
VCR, CD player, VCD
player, LD player, MD deck,
DAT deck, tape deck,
satellite tuner, Blu-ray disc
player, or PSX.
the numeric buttons of the
VCR, CD player, VCD
player, LD player, MD deck,
DAT deck, tape deck,
satellite tuner, Blu-ray disc
player, or PSX.
– store a station during tuner
operation.
To enter the value of Sony TV,
press TV (
press TV (
X) and then press
ENT/MEM.
CLEAR
Press SHIFT (
W) and then
press CLEAR to
– clear a mistake when you
– clear a mistake when you
press the incorrect numeric
button of the DVD player,
Blu-ray disc player, PSX,
satellite tuner, DVD/VHS
COMBO, or DVD/HDD
COMBO.
button of the DVD player,
Blu-ray disc player, PSX,
satellite tuner, DVD/VHS
COMBO, or DVD/HDD
COMBO.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
tuner or DVD player.
-/--
Press SHIFT (
W) and then
press -/-- to select the channel
entry mode, either one or two
digit of the VCR or satellite
tuner.
To select the channel entry
mode of the TV, press TV (
entry mode, either one or two
digit of the VCR or satellite
tuner.
To select the channel entry
mode of the TV, press TV (
X)
and then press -/--.
Selected
input
input
Components that can be
played back
played back
MD/TAPE
MD or Tape deck, etc.,
connected to the MD/TAPE
jack.
connected to the MD/TAPE
jack.
SA-CD/CD
Super Audio CD or CD
player, etc., connected to the
SA-CD/CD jack.
player, etc., connected to the
SA-CD/CD jack.
TUNER
Built-in radio tuner.
PHONO
Turntable, etc., connected to
the PHONO jack.
the PHONO jack.
MULTI IN
Component connected to the
MULTI CHANNEL INPUT
jack.
MULTI CHANNEL INPUT
jack.
DMPORT
Portable audio, etc.,
connected to the DIGITAL
MEDIA PORT adapter
connected to the receiver.
connected to the DIGITAL
MEDIA PORT adapter
connected to the receiver.
XM
(DA2400ES: US,
Canadian/DG920)
(DA2400ES: US,
Canadian/DG920)
XM Mini-Tuner and Home
Dock connected to the XM
jack.
Dock connected to the XM
jack.
SIRIUS
(DA2400ES: US,
Canadian)
(DA2400ES: US,
Canadian)
SiriusConnect Home tuner
connected to the SIRIUS jack.
connected to the SIRIUS jack.
SAT
Satellite tuner, etc., connected
to the SAT jack.
to the SAT jack.
TV
TV connected to the TV jack.
>10
Press SHIFT (
W) and then
press >10 to
– select track numbers over 10
– select track numbers over 10
of the CD player, VCD
player, LD player, MD deck,
tape deck, TV, VCR, or
satellite tuner.
player, LD player, MD deck,
tape deck, TV, VCR, or
satellite tuner.
– select channel numbers of
the Digital CATV terminal.
E 2CH/
A.DIRECT
Press to select a sound field.
A.F.D.
MOVIE
MUSIC
F SLEEP
Press to activate the Sleep
Timer function and the duration
which the receiver turns off
automatically.
Timer function and the duration
which the receiver turns off
automatically.
G NIGHT
MODE
Press to activate the Night
Mode function.
Mode function.
H GUI MODE
Press to display the GUI menu
on the TV screen.
on the TV screen.
M TV CH +
a)
/–
Press TV (
X) and then press
TV CH +/– to select preset TV
channels.
channels.
PRESET
+
+
a)
/–
Press to
– select preset stations.
– select preset channels of the
– select preset stations.
– select preset channels of the
VCR, satellite tuner, Blu-ray
disc player, DVD player,
DVD/VHS COMBO, or
DVD/HDD COMBO.
disc player, DVD player,
DVD/VHS COMBO, or
DVD/HDD COMBO.
N F1, F2
Press F1 or F2 to select a
component.
s $VD/HDD COMBO
component.
s $VD/HDD COMBO
F1: HDD mode
F2: DVD mode
F2: DVD mode
s $VD/VHS COMBO
F1: DVD mode
F2: VHS mode
F2: VHS mode
Ver. 1.4
STR-DA2400ES/DG920
12
About the indicators on the display window
Name
Function
" SW
Lights up when subwoofer
is connected and the audio
signal is output from the
SUBWOOFER jack. While
this indicator lights up, the
receiver creates a
subwoofer signal based on
the LFE signal in the disc
being played back or the
low frequency components
of the front channels.
is connected and the audio
signal is output from the
SUBWOOFER jack. While
this indicator lights up, the
receiver creates a
subwoofer signal based on
the LFE signal in the disc
being played back or the
low frequency components
of the front channels.
# LFE
Lights up when the disc
being played back contains
an LFE (Low Frequency
Effects) channel and the
LFE channel signal is
actually being reproduced.
Since the LFE signal is not
recorded in all parts of the
input signal the bar
indication will fluctuate
(and may turn off) during
playback.
being played back contains
an LFE (Low Frequency
Effects) channel and the
LFE channel signal is
actually being reproduced.
Since the LFE signal is not
recorded in all parts of the
input signal the bar
indication will fluctuate
(and may turn off) during
playback.
$ COAX
Lights up when INPUT
MODE is set to “AUTO”
and the source signal is a
digital signal being input
through the COAXIAL
jack.
MODE is set to “AUTO”
and the source signal is a
digital signal being input
through the COAXIAL
jack.
1 XM
Lights up when XM Mini-
Tuner and Home Dock are
connected and “XM” is
selected.
Tuner and Home Dock are
connected and “XM” is
selected.
2 PL/
PL II/
PL IIx
PL IIx
“
PL” lights up when the
receiver applies Pro Logic
processing to 2 channel
signals in order to output
the center and surround
channel signals.
“
processing to 2 channel
signals in order to output
the center and surround
channel signals.
“
PL II” lights up when
the Pro Logic II decoder is
activated.
“
activated.
“
PL IIx” lights up when
the Pro Logic IIx decoder is
activated.
However, these indicators
do not light up if both the
center and surround
speakers are not connected
and you select a sound field
using the A.F.D. button.
Note
activated.
However, these indicators
do not light up if both the
center and surround
speakers are not connected
and you select a sound field
using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding
does not function for signals
with a sampling frequency of
more than 48 kHz.
does not function for signals
with a sampling frequency of
more than 48 kHz.
3 BI-AMP
Lights up when BI-AMP
Speaker setting is set to
“ON”.
Speaker setting is set to
“ON”.
4 EQ
Lights up when the
equalizer is activated.
equalizer is activated.
5 NEO:6
Lights up when DTS Neo:6
Cinema/Music decoding is
activated.
Cinema/Music decoding is
activated.
(DA2400ES: US,
Canadian/DG920)
Canadian/DG920)
(DA2400ES)
XK Playback
channel
indicators
indicators
L
R
C
SL
SR
S
R
C
SL
SR
S
SBL
SBR
SB
SBR
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes
around the letters vary to
show how the receiver
downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components
obtained by Pro Logic
processing)
Surround Back Left
Surround Back Right
Surround Back (the
surround back components
obtained by 6.1 channel
decoding)
Example:
Recording format (Front/
Surround): 3/2.1
When Speaker Pattern is set
to “3/0.1”
Sound Field: A.F.D. AUTO
indicate the channels being
played back. The boxes
around the letters vary to
show how the receiver
downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components
obtained by Pro Logic
processing)
Surround Back Left
Surround Back Right
Surround Back (the
surround back components
obtained by 6.1 channel
decoding)
Example:
Recording format (Front/
Surround): 3/2.1
When Speaker Pattern is set
to “3/0.1”
Sound Field: A.F.D. AUTO
% OPT
Lights up when INPUT
MODE is set to “AUTO”
and the source signal is a
digital signal being input
through the OPTICAL jack.
MODE is set to “AUTO”
and the source signal is a
digital signal being input
through the OPTICAL jack.
& D/
D EX/
D+/
TrueHD
D+/
TrueHD
“
D” lights up when the
receiver is decoding Dolby
Digital signals.
“
Digital signals.
“
D EX” lights up when
the receiver is decoding
Dolby Digital Surround EX
signals.
“
Dolby Digital Surround EX
signals.
“
D+” lights up when the
receiver is decoding Dolby
Digital Plus signals.
“
Digital Plus signals.
“
TrueHD” lights up
when the receiver is
decoding Dolby TrueHD
signals.
Note
decoding Dolby TrueHD
signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set
to “AUTO”.
format disc, be sure that you
have made digital connections
and that INPUT MODE is set
to “AUTO”.
' Neural-THX Lights up when the receiver
applies Neural-THX
processing to input signals.
processing to input signals.
Name
Function
Name
Function
( DTS/
DTS-ES/
DTS 96/24
DTS 96/24
“DTS” lights up when the
receiver is decoding DTS
signals.
“DTS-ES” lights up when
the receiver is decoding
DTS-ES signals.
“DTS 96/24” lights up
when the receiver is
decoding DTS 96/24 (DTS
96 kHz/24 bit) signals.
Note
receiver is decoding DTS
signals.
“DTS-ES” lights up when
the receiver is decoding
DTS-ES signals.
“DTS 96/24” lights up
when the receiver is
decoding DTS 96/24 (DTS
96 kHz/24 bit) signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
“AUTO”.
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
“AUTO”.
) D.RANGE
Lights up when dynamic
range compression is
activated.
range compression is
activated.
* CAT
Lights up when category
mode is selected during the
satellite radio operation.
mode is selected during the
satellite radio operation.
+ SP A/SP B/
SP A+
(DA2400ES: US,
Canadian/DG920)
Canadian/DG920)
B
Lights up according to the
speaker system used
(page 44). However, these
indicators do not light up if
the speaker output is turned
off or if headphones are
connected.
speaker system used
(page 44). However, these
indicators do not light up if
the speaker output is turned
off or if headphones are
connected.
, Tuner
indicators
Lights up when using the
receiver to tune in radio
stations, etc.
receiver to tune in radio
stations, etc.
- SLEEP
Lights up when the sleep
timer is activated.
timer is activated.
. A.DIRECT
Lights up when the receiver
is processing Analog Direct
signals.
is processing Analog Direct
signals.
/ SIRIUS
Lights up when the
SiriusConnect Home tuner
is connected and “SIRIUS”
is selected.
SiriusConnect Home tuner
is connected and “SIRIUS”
is selected.
0 MEM
Lights up when a memory
function, such as Preset
Memory etc., is activated.
function, such as Preset
Memory etc., is activated.
6 DTS-HD
MSTR/
DTS-HD HI
RES
DTS-HD HI
RES
“DTS-HD MSTR” lights up
when the receiver is
decoding DTS-HD Master
Audio signals.
“DTS-HD HI RES” lights
up when the receiver is
decoding DTS-HD High
Resolution signals.
when the receiver is
decoding DTS-HD Master
Audio signals.
“DTS-HD HI RES” lights
up when the receiver is
decoding DTS-HD High
Resolution signals.
7 LPCM
Lights up when Linear
PCM signals are detected.
PCM signals are detected.
8 ANALOG
Lights up when
– INPUT MODE is set to
– INPUT MODE is set to
“AUTO” and no digital
signal is being input
through the COAXIAL,
OPTICAL or HDMI
jacks.
signal is being input
through the COAXIAL,
OPTICAL or HDMI
jacks.
– INPUT MODE is set to
“ANALOG”.
– the “Analog Direct” is
being used.
9 DMPORT
Lights up when DIGITAL
MEDIA PORT adapter is
connected and “DMPORT”
is selected.
MEDIA PORT adapter is
connected and “DMPORT”
is selected.
: MULTI IN
Lights up when multi
channel input is selected.
channel input is selected.
; HDMI
Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack.
recognizes a component
connected via an HDMI IN
jack.
Ver. 1.1
Click on the first or last page to see other STR-DA2400ES / STR-DG920 service manuals if exist.