Sony STR-DA2000ES / STR-DB2000 Service Manual ▷ View online
10
STR-DA2000ES/DB2000
3-3.
FRONT PANEL SECTION
2
two flat head screws
1
two flat head screws
3
two flat head screws
5
case
4
two flat head screws
4
six screws
(BV/ring)
(BV/ring)
3
connector
(CN1091)
(CN1091)
5
two screws
(BV/ring)
(BV/ring)
2
wire (flat type) (29 core)
(CN2008)
(CN2008)
2
tape
6
front panel section
Note:
Follow the disassembly procedure in the numerical order given.
3-2.
CASE
11
STR-DA2000ES/DB2000
5
connector
(CN1)
(CN1)
4
connector
(CN9)
(CN9)
3
three connectors
(CN2, 3, 5)
(CN2, 3, 5)
8
two screws
(BVTP3
(BVTP3
×
8)
6
two screws
(BVTP3
(BVTP3
×
8)
7
two screws
(BVTP3
(BVTP3
×
8)
9
switching regulator
1
connector
(CN4)
(CN4)
2
connector
(CN8)
(CN8)
hook
hook
3-4.
SWITCHING REGULATOR
qs
main block
qa
five screws
(BVTP 3
(BVTP 3
×
8)
2
wire (flat type) (29core)
(CN2008)
(CN2008)
1
tape
0
two screws
(BVTP 3
(BVTP 3
×
8)
9
two screws
(BVTP 3
(BVTP 3
×
8)
7
three screws
(BVTP 3
(BVTP 3
×
8)
8
three screws
(BVTP 3
(BVTP 3
×
8)
4
two tapes
5
two binding bands
(taiton)
(taiton)
6
two filter clamps
3
connector
(CN1091)
(CN1091)
hook
3-5.
MAIN BLOCK
12
STR-DA2000ES/DB2000
qa
screw
(BVTP 3
(BVTP 3
×
8)
q;
five screws
(BVTP 3
(BVTP 3
×
8)
6
connector
(CN2052)
(CN2052)
5
connector
(CN2053)
(CN2053)
qs
digital board
9
connector
8
connector
(CN2701)
(CN2701)
7
connector
(CN2800)
(CN2800)
4
connector
(CN2801)
(CN2801)
3
connector
(CN2685)
(CN2685)
1
wire (flat cable)
(25 core) (CN2006)
(25 core) (CN2006)
2
wire (flat type)
(11 core) (EXCEPT AEP, UK)
(15 core) (AEP, UK)
(CN2051)
(11 core) (EXCEPT AEP, UK)
(15 core) (AEP, UK)
(CN2051)
1
two screws
(PSW 3
(PSW 3
×
8)
3
screw
(BVTP 3
(BVTP 3
×
8)
q;
two connectors
(CN2801, 2802)
(CN2801, 2802)
5
six screws
(BVTP 3
(BVTP 3
×
10)
7
screw
(BVTP 3
(BVTP 3
×
10)
(US, Canadian)
9
wire (flat type)
(25 core) (CN1901)
(25 core) (CN1901)
qd
D-AMP board Section
8
qs
connector
(CN1853)
(CN1853)
qa
connector
(CN1852)
(CN1852)
4
six caps
6
cap
(US, Canadian)
(US, Canadian)
2
two wires
3-7.
D. AMP BOARD SECTION
3-6.
DIGITAL BOARD
13
STR-DA2000ES/DB2000
SOUND FIELD INITIALIZE MODE
The preset sound field is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the
[MUSIC]
button, press the
I/1
button to
turn on the main power.
2. The message “S. F. Initialize” appears and initialization is per-
formed.
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set re-
ceives can be changed.
Procedure:
1. While pressing the
ceives can be changed.
Procedure:
1. While pressing the
[INPUT MODE]
button, press the
I/1
but-
ton to turn on the main power.
2. Either the message “COMMAND MODE [AV1]” or “COM-
MAND MODE [AV2]” appears. Select the desired mode.
SF LOCK ON/OFF CHANGE MODE
Procedure:
1. While pressing the
1. While pressing the
[MUSIC]
and
[MEMORY/CLEAR]
buttons,
press the
I/1
button to turn on the main power.
2. Either the message “SF LOCK [OFF]” or “SF LOCK [ON]”
appears.
SPECIAL MENU MODE
Procedure:
1. Press the
1. Press the
I/1
button to turn on the main power, then while
pressing the
[MEMORY/ENTER]
button, press the
[MUSIC]
,
[INPUT MODE]
,
[MOVIE]
button in order.
2. The message “SPECIALIZED!” appears.
3. Each time the
3. Each time the
[MENU]
dial is turned clockwise, the item is
switched in order as follows.
SECTION 4
TEST MODE
TUNER FACTORY PRESET MODE
All preset contents are reset to the default setting.
Procedure:
1. While pressing the
Procedure:
1. While pressing the
[SURR BACK DECODING]
and
[PRE-
SET TUNING --]
buttons, press the
I/1
button to turn on the
main power.
2. The message “FACTORY PRESET” appears and the present
contents are reset to the default values.
MEMORY CLEARING MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the
[INPUT MODE]
and
[MEMORY/ENTER]
buttons, press the
I/1
button to turn on the main power.
2. The message “MEMORY CLEARING” appears and the
memories are reset to the default values.
3. When done, the message “MEMORY CLEARED!” appears.
SWAP MODE
Procedure:
1. While pressing the
1. While pressing the
[2CH]
and
[MEMORY/ENTER]
buttons,
press the
I/1
button to turn on the main power.
2. The message “SWAP MODE !” appears.
3. Press the
3. Press the
[DISPLAY]
button.
4. The message “–27.0dB” appears. (Volume level is “MID”)
5. Press the
5. Press the
[DISPLAY]
button once again.
6. The message “+5.0dB” appears. (Volume level is “MAX”)
7. Press the
7. Press the
[DISPLAY]
button once again.
8. The message “–oodB” appears. (Volume level is “MIN”)
FLUORESCENT INDICATOR TUBE PATTERN
CHECK MODE
CHECK MODE
All fluorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the
[DISPLAY]
and
[MEMORY/ENTER]
but-
tons, press the
I/1
button to turn on the main power.
2. All segments and
[MULTI CHANNEL DECODING]
indicator
LED turn on.
TUNER AM STEP CHANGE (9 kHz/10 kHz) MODE
(STR-DA2000ES only)
(STR-DA2000ES only)
Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
Procedure:
1. Press the
channel step.
Procedure:
1. Press the
I/1
button to turn on the main power.
2. Turn the
[INPUT SELECTOR]
dial to select the “AM”
3. Press the
I/1
button to turn off the main power.
4. While pressing the
[PRESET TUNING +]
or
[TUNING +]
but-
ton, press the
I/1
button to turn on the main power.
5. Either the message “9 K STEP” or “10 K STEP” appears. Se-
lect the desired step.
TUNER AUTOBETICAL SELECT MODE
(STR-DB2000: AEP and UK models only)
(STR-DB2000: AEP and UK models only)
Procedure:
1. While pressing the
1. While pressing the
[MEMORY/ENTER]
button, press the
I/1
button to turn on the main power.
2. The message “Autobetical” appears and scans and stores all
the FM and FM RDS stations in the broadcast area.
3. When done, the message “Finished” appears.
Click on the first or last page to see other STR-DA2000ES / STR-DB2000 service manuals if exist.