DOWNLOAD Sony SS-SHAKE33 / SS-SHAKE44 / SS-SHAKE55 / SS-SHAKE66 / SS-SHAKE77 / SS-SHAKE88 Service Manual ↓ Size: 635.64 KB | Pages: 10 in PDF or view online for FREE

1.0

2014.01

New

1.1

2014.04

Addition of SS-SHAKE44, SS-SHAKE55, SS-SHAKE66 and SS-SHAKE88 model.

Add illustration of ABSORBENT, ACOUSTIC and CUSHION C in page 6.

Change P/N of Ref. No. 51 in page 6.

1.2

2014.05

Addition of Argentina model (SHAKE-33/55/77).

Change P/N of Ref. No. 6, 8 and 12 in page 5.

Change P/N of Ref. No. 110, 111, 113, 114, 115 and 117 in page 7.

Delete SARANET, CUSHION in page 5.

Delete CUSHION D in page 7.

1.3

2014.07

Add P/N and description of Ref. No. 55, 58 and 59 (for loudspeaker’s dust cap: black) in page 6.

Add P/N and description of Ref. No. 108, 110, 111 and 113 (for loudspeaker’s dust cap: black) in page 7.

Change description of Ref. No. 55, 58 and 59 (for loudspeaker’s dust cap: gray) in page 6.

Change description of Ref. No. 108, 110, 111 and 113 (for loudspeaker’s dust cap: gray) in page 7.

Change P/N of Ref. No. 118 in page 7.

1.4

2014.12

Add Note 2 in page 6 and 7.

Change P/N of CABLE WITH CONNECTOR (LEFT CHANNEL SPEAKER) in page 7.

Delete ABSORBENT, AC in page 6.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note:  If you still see the original page, press the [Enter] key again.

1.0

2014.01

New

1.1

2014.04

Addition of SS-SHAKE44, SS-SHAKE55, SS-SHAKE66 and SS-SHAKE88 model.

Add illustration of ABSORBENT, ACOUSTIC and CUSHION C in page 6.

Change P/N of Ref. No. 51 in page 6.

1.2

2014.05

Addition of Argentina model (SHAKE-33/55/77).

Change P/N of Ref. No. 6, 8 and 12 in page 5.

Change P/N of Ref. No. 110, 111, 113, 114, 115 and 117 in page 7.

Delete SARANET, CUSHION in page 5.

Delete CUSHION D in page 7.

1.3

2014.07

Add P/N and description of Ref. No. 55, 58 and 59 (for loudspeaker’s dust cap: black) in page 6.

Add P/N and description of Ref. No. 108, 110, 111 and 113 (for loudspeaker’s dust cap: black) in page 7.

Change description of Ref. No. 55, 58 and 59 (for loudspeaker’s dust cap: gray) in page 6.

Change description of Ref. No. 108, 110, 111 and 113 (for loudspeaker’s dust cap: gray) in page 7.

Change P/N of Ref. No. 118 in page 7.

1.4

2014.12

Add Note 2 in page 6 and 7.

Change P/N of CABLE WITH CONNECTOR (LEFT CHANNEL SPEAKER) in page 7.

Delete ABSORBENT, AC in page 6.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note:  If you still see the original page, press the [Enter] key again.

1.0

2014.01

New

1.1

2014.04

Addition of SS-SHAKE44, SS-SHAKE55, SS-SHAKE66 and SS-SHAKE88 model.

Add illustration of ABSORBENT, ACOUSTIC and CUSHION C in page 6.

Change P/N of Ref. No. 51 in page 6.

1.2

2014.05

Addition of Argentina model (SHAKE-33/55/77).

Change P/N of Ref. No. 6, 8 and 12 in page 5.

Change P/N of Ref. No. 110, 111, 113, 114, 115 and 117 in page 7.

Delete SARANET, CUSHION in page 5.

Delete CUSHION D in page 7.

1.3

2014.07

Add P/N and description of Ref. No. 55, 58 and 59 (for loudspeaker’s dust cap: black) in page 6.

Add P/N and description of Ref. No. 108, 110, 111 and 113 (for loudspeaker’s dust cap: black) in page 7.

Change description of Ref. No. 55, 58 and 59 (for loudspeaker’s dust cap: gray) in page 6.

Change description of Ref. No. 108, 110, 111 and 113 (for loudspeaker’s dust cap: gray) in page 7.

Change P/N of Ref. No. 118 in page 7.

1.4

2014.12

Add Note 2 in page 6 and 7.

Change P/N of CABLE WITH CONNECTOR (LEFT CHANNEL SPEAKER) in page 7.

Delete ABSORBENT, AC in page 6.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note:  If you still see the original page, press the [Enter] key again.