Sony SS-GPX555 / SS-GPX888 / SS-WGP555 / SS-WGP888 Service Manual ▷ View online
MEMO
9
SS-GPX555/GPX888/WGP555/WGP888
SS-GPX555/GPX888/WGP555/WGP888
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.02
New
1.1
2014.10
Add illustration of CUSHION C in page 5.
Change illustration of the STAND, WOOFER in page 5.
Change P/N for PANEL ASSY, FRONT and CABLE WITH CONNECTOR in page 5.
Delete CUSHION, FP in page 5.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
SS-GPX555/GPX888/WGP555/WGP888
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.02
New
1.1
2014.10
Add illustration of CUSHION C in page 5.
Change illustration of the STAND, WOOFER in page 5.
Change P/N for PANEL ASSY, FRONT and CABLE WITH CONNECTOR in page 5.
Delete CUSHION, FP in page 5.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
SS-GPX555/GPX888/WGP555/WGP888
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.02
New
1.1
2014.10
Add illustration of CUSHION C in page 5.
Change illustration of the STAND, WOOFER in page 5.
Change P/N for PANEL ASSY, FRONT and CABLE WITH CONNECTOR in page 5.
Delete CUSHION, FP in page 5.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.