Sony SS-CTIV300 / SS-TSIV300 / SS-WSIV300 Service Manual ▷ View online
SERVICE MANUAL
Published by Sony EMCS (Malaysia) PG Tec
Sony Corporation
SPECIFICATIONS
SPEAKER SYSTEM
9-890-655-01
2014C81-1
©
2014.03
E Model
Ver. 1.0 2014.03
Design and specifi cations are subject to change without notice.
SS-CTIV300/TSIV300/
WSIV300
Photo: SS-CTIV300
Photo: SS-TSIV300
Photo: SS-WSIV300
• SS-CTIV300 is the center speaker in HT-IV300.
• SS-TSIV300 is the front speaker and surround speaker in HT-IV300.
• SS-WSIV300 is the subwoofer speaker in HT-IV300.
• SS-TSIV300 is the front speaker and surround speaker in HT-IV300.
• SS-WSIV300 is the subwoofer speaker in HT-IV300.
• Front/Surround (SS-TSIV300)
Dimensions (w/h/d) (approx.)
Dimensions (w/h/d) (approx.)
100 mm × 114 mm × 102 mm
(wallmounted,
horizontal)
114 mm × 100 mm × 102 mm
(whole speaker, vertical)
Mass (approx.)
0.41 kg (without speaker cord)
• Center (SS-CTIV300)
Dimensions (w/h/d) (approx.)
Dimensions (w/h/d) (approx.)
100 mm × 114 mm × 102 mm
(wallmounted,
horizontal)
114 mm × 100 mm × 102 mm
(whole speaker, vertical)
Mass (approx.)
0.44 kg (with speaker cord)
• Subwoofer (SS-WSIV300)
Dimensions (w/h/d) (approx.)
245 mm × 350 mm × 325 mm
Mass (approx.)
6.2 kg (with speaker cord)
• JIG
When disassembling the set, use the following jig
(for speaker removal).
Part No.: J-2501-238-A
JIG FOR SPEAKER REMOVAL
When disassembling the set, use the following jig
(for speaker removal).
Part No.: J-2501-238-A
JIG FOR SPEAKER REMOVAL
– Refer next page for part list –
SS-CTIV300/TSIV300/WSIV300
2
PARTS LIST (SS-CTIV300)
PARTS LIST (SS-TSIV300)
PARTS LIST (SS-WSIV300)
1
A-1979-990-A
SS-CTIV300 (Center speaker)
2
2-893-646-01
FOOT (2 pieces)
11
A-1979-986-A
SS-TSIV300 (Front speaker: L-CH)
11
A-1979-987-A
SS-TSIV300 (Front speaker: R-CH)
11
A-1979-988-A
SS-TSIV300 (Surround speaker: L-CH)
11
A-1979-989-A
SS-TSIV300 (Surround speaker: R-CH)
12
2-893-646-01
FOOT (2 pieces)
21
A-1979-991-A SS-WSIV300
(Subwoofer)
22
2-682-469-11
FOOT (SW) (1 piece)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
1
2
11
12
21
22
MEMO
SS-CTIV300/TSIV300/WSIV300
3
SS-CTIV300/TSIV300/WSIV300
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.03
New
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
Display