Sony SS-CNP3500 / SS-CRP3500 / SS-MSP3500 / SS-SRP3500 / SS-WP3500 Service Manual ▷ View online
SERVICE MANUAL
Published by Sony EMCS (Malaysia) PG Tec
Sony Corporation
SPECIFICATIONS
SPEAKER SYSTEM
9-890-572-01
2011C08-1
©
2011C08-1
©
2011.03
E Model
Ver. 1.0 2011.03
• SS-CNP3500 is the center speaker in HT-DDW3500.
• SS-MSP3500 is the front speaker in HT-DDW3500.
• SS-SRP3500 is the surround speaker in HT-DDW3500.
• SS-WP3500 is the subwoofer in HT-DDW3500.
• SS-CRP3500 is composed of SS-CNP3500, SS-MSP3500 and SS-SRP3500.
• SS-MSP3500 is the front speaker in HT-DDW3500.
• SS-SRP3500 is the surround speaker in HT-DDW3500.
• SS-WP3500 is the subwoofer in HT-DDW3500.
• SS-CRP3500 is composed of SS-CNP3500, SS-MSP3500 and SS-SRP3500.
SS-CRP3500 COMPONENT MODEL NAME
SS-CRP3500
Front speaker
SS-MSP3500
Center speaker
SS-CNP3500
Surround speaker
SS-SRP3500
• Front speaker (SS-MSP3500)
Speaker system
2-way, Bass refl ex,
Magnetically shielded
Speaker unit
Woofer:
Woofer:
160 mm, cone type
Tweeter:
25 mm, horn type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
230 mm × 905 mm ×
285 mm
(with foot)
Mass (Approx.)
11.5 kg
• Center speaker (SS-CNP3500)
Speaker system
2-way, 3-driver, Bass
refl ex, Magnetically
shielded
Speaker unit
Woofer:
Woofer:
100 mm, cone type × 2
Tweeter:
25 mm, horn type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
515 mm × 175 mm ×
225 mm
(with foot)
Mass (Approx.)
4.8 kg
• Surround speaker (SS-SRP3500)
Speaker system
Full range, Bass refl ex
Speaker unit
Woofer:
Woofer:
100 mm, cone type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
174 mm × 220 mm ×
166 mm
(with foot)
Mass (Approx.)
1.5 kg
• Subwoofer (SS-WP3500)
Speaker system
Bass refl ex, Magnetically
shielded
Speaker unit
200 mm, cone type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
275 mm × 345 mm × 305 mm
(with foot)
Mass (Approx.)
6.0 kg
Design and specifi cations are subject to change without notice.
Photo: SS-CNP3500
Photo: SS-MSP3500
Photo: SS-SRP3500
Photo: SS-WP3500
• JIG
When disassembling the set, use the following jig (for speaker
When disassembling the set, use the following jig (for speaker
removal).
Part No.: J-2501-238-A
JIG FOR SPEAKER REMOVAL
JIG FOR SPEAKER REMOVAL
SS-CNP3500/MSP3500/
SRP3500/WP3500
SS-CRP3500
SS-CNP3500/MSP3500/SRP3500/WP3500
2
SECTION 1
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
1-1. FRONT PANEL ASSY (SS-WP3500)
1-2. FRONT PANEL ASSY (SS-CNP3500)
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
six bosses
front panel assy
Insert a flat-tip screwdriver into a recess
in the bottom of the set
to raise the front panel assy a little.
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
nine bosses
front panel assy
Insert a flat-tip screwdriver
into a recess in the bottom of the set
to raise the front panel assy a little.
SS-CNP3500/MSP3500/SRP3500/WP3500
3
1-3. FRONT PANEL ASSY, DUCT PANEL ASSY (SS-MSP3500)
2 Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note: When using a jig, please work so as not to injure
front panel and speaker cabinet.
5 Insert the jig (J-2501-238-A) into a space
and raise the duct panel assy gradually.
Note: When using a jig, please work
so as not to injure duct panel assy
and speaker cabinet.
5 Insert the jig (J-2501-238-A) into a space
and raise the duct panel assy gradually.
Note: When using a jig, please work
so as not to injure duct panel assy
and speaker cabinet.
4 Insert a flat-tip screwdriver into a
recess in the bottom of the set to
raise the duct panel assy a little.
six bosses
twelve bosses
3 front panel assy
6 duct panel assy
1 Insert a flat-tip screwdriver into a
recess in the side of the set to
raise the front panel assy a little.
SS-CNP3500/MSP3500/SRP3500/WP3500
4
SECTION 2
EXPLODED VIEWS
1
A-1802-756-A FRONT PANEL ASSY
2
4-874-614-02 SCREW (1) (3.5X14), TAPPING
SP1
1-858-644-11 LOUDSPEAKER (20CM)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice.
vice.
Some delay should be anticipated when
ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
R
R
Parts Color Cabinet’s Color
2-1. SS-WP3500
1
2
SP1
not supplied
not
supplied
not supplied
Display