Sony SRS-ZP1000 Service Manual ▷ View online
9
SRS-ZP1000
Note on Printed Wiring Board
•
•
X
: parts extracted from the component side.
•
a
: Through hole.
•
: Pattern from the side which enables seeing.
Caution:
Pattern face side:
Pattern face side:
Parts on the pattern face side seen from
(Side B)
the pattern face are indicated.
Parts face side:
Parts on the parts face side seen from
(Side A)
the parts face are indicated.
Note on Schematic Diagram:
• All capacitors are in
• All capacitors are in
µ
F unless otherwise noted. pF:
µµ
F 50 V or
less are not indicated except for electrolytics and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise specified.
•
C
: panel designation.
•
A
: B+ Line.
•
B
: B– Line.
•
H
: adjustment for repair.
• Voltages are dc with respect to ground under no-signal (detuned)
cinditions.
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal production toler-
ances.
ances.
• Signal path.
F
: AUDIO
• Abbreviation
CH: Chinese model
NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
Note: The components identified by mark
0
or dotted line
with mark
0
are critical for safety.
Replace only with part number specified.
• Indication of transistor.
C
B
These are omitted.
E
Q
B
These are omitted.
C
E
Q
Ver. 1.2
10
SRS-ZP1000
SECTION 3
EXPLODED VIEWS
NOTE :
•
-XX, -X mean standardized parts, so they may
have some difference from the original one.
have some difference from the original one.
•
Items marked “ * ”are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
•
The mechanical parts with no reference number
in the exploded views are not supplied.
in the exploded views are not supplied.
•
Accessories are given in the last of this parts
list.
list.
•
Abbreviation
CH: Chinese model
CH: Chinese model
3-1. L-CH SECTION
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
not supplied
not supplied
not supplied
not supplied
1 40
40
40
3
4
5
6
40
40
40
33
33
38
38
SP901
10
11
12
13
13
34
13
9
13 14
15
15
16
15
17
18
18
18
19
40
40
42
21
36
32
22
8
8
23
24
25
26
35
2
27
28
37
29
13
31
40
7
40
40
40
30
T901
F901
F902
41
1
2-102-926-01 KNOB, VOLUME
2
3-254-144-11 SCREW (B3), (+) BV TAPPING
3
2-102-919-01 BUTTON, POWER
4
2-102-920-01 PLATE, LIGHT GUIDE
5
2-102-927-01 FRAME, FRONT
6
2-148-628-01 CUSHION, FRAME FRONT
7
2-102-918-01 FOOT, RUBBER
8
2-349-024-01 SCREW (+BVTP 3.1X13) (TYPE1)
9
2-547-362-01 PACKING, TWEETER (A)
10
A-1077-235-A PANEL, FRONT (L) SUB ASSY (US)
10
A-1122-605-A PANEL, FRONT (L) SUB ASSY (AEP, UK, CH)
11
X-2025-138-1 SPEAKER GRILLE ASSY
12
2-515-507-01 PACKING, SPEAKER GRILLE
13
3-252-829-01 SCREW (B3), (+) BV TAPPING
14
2-148-632-01 PACKING, TWEETER
15
2-103-679-01 PACKING, PANEL
16
2-102-909-01 PANEL, STAND
17
2-102-928-01 CABINET, SPEAKER (L)
18
2-349-022-11 SCREW, +BVTP (4X20) (TYPE1)
19
2-102-911-01 PACKING, DUCT
21
A-1103-970-A CONTROL BOARD, COMPLETE
22
1-694-516-11 TERMINAL, SPEAKER
0 23
1-777-071-23 CORD, POWER (AEP, UK)
0 23
1-782-464-22 CORD, POWER (CH)
0 23
1-783-820-11 CORD, POWER (US)
*
24
3-703-244-00 BUSHING (2104), CORD
25
2-102-922-11 PANEL, BACK (L) (US)
25
2-102-922-21 PANEL, BACK (L) (AEP, UK)
25
2-102-922-31 PANEL (L), BACK (CH)
26
2-102-924-01 BRACKET, CORD
27
2-148-631-01 CUSHION, BACK (B)
28
4-986-971-01 SCREW (3.5)
29
2-148-630-01 CUSHION, BACK (A)
30
A-1104-206-A AMP BOARD, COMPLETE (US)
30
A-1104-207-A AMP BOARD, COMPLETE (AEP, UK, CH)
31
2-102-917-01 COVER, LOWER
32
2-548-413-01 PACKING, H/PHONE JACK
33
2-178-923-01 CUSHION, FRONT (A)
34
2-549-798-01 PACKING, FRONT (B)
35
2-548-414-01 PACKING, POWER CORD
36
2-178-922-01 CUSHION, HP
37
3-577-414-01 SPACER
38
2-580-680-01 COWER LOWER, CUSHION
40
3-363-099-81 SCREW (CASE 3 TP2)
41
1-500-574-11 CORE, FERRITE
42
2-589-367-01 PACKING, ANALOG IN
0 F901
1-532-464-33 FUSE (T2.5AL/250V) (AEP, UK, CH)
0 F901
1-533-450-12 FUSE, GLASS TUBE (DIA. 5) (T2.5AL/125V)(US)
0 F902
1-532-464-33 FUSE (T2.5AL/250V) (AEP, UK, CH)
0 F902
1-533-450-12 FUSE, GLASS TUBE (DIA. 5) (T2.5AL/125V)(US)
SP901
1-825-909-11 SPEAKER (100W102//C)
0 T901
1-443-653-11 TRANSFORMER, POWER (US)
0 T901
1-443-654-11 TRANSFORMER, POWER (AEP, UK, CH)
Ver. 1.2
11
SRS-ZP1000
3-2. R-CH SECTION
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
not supplied
not supplied
not supplied
C1
SP904
not supplied
52
52
52
71
54
55
56
56
72
57
58
53
56
56
59
59
59
60
61
62
62
62
63
52
52
64
65
64
66
67
68
69
70
52
52
51
71
73
73
51
2-102-918-01 FOOT, RUBBER
52
3-363-099-81 SCREW (CASE 3 TP2)
53
2-547-362-01 PACKING, TWEETER (A)
54
2-102-912-11 PANEL, FRONT (R)
55
X-2025-138-1 SPEAKER GRILLE ASSY
56
3-252-829-01 SCREW (B3), (+) BV TAPPING
57
2-515-507-01 PACKING, SPEAKER GRILLE
58
2-148-632-01 PACKING, TWEETER
59
2-103-679-01 PACKING, PANEL
60
2-102-909-01 PANEL, STAND
61
2-148-629-01 CABINET, SPEAKER (R)
62
2-349-022-11 SCREW, +BVTP (4X20) (TYPE1)
63
2-102-911-01 PACKING, DUCT
64
2-349-024-01 SCREW (+BVTP 3.1X13) (TYPE1)
65
1-694-516-11 TERMINAL, SPEAKER
66
2-102-921-01 PANEL, BACK (R)
67
2-148-631-01 CUSHION, BACK (B)
68
4-986-971-01 SCREW (3.5)
69
2-148-630-01 CUSHION, BACK (A)
70
2-102-917-01 COVER, LOWER
71
2-178-923-01 CUSHION, FRONT (A)
72
2-549-798-01 PACKING, FRONT (B)
73
2-580-680-01 LOWER, CUSHION
C1
1-107-712-11 ELECT
3.3uF
20%
50V
SP904
1-825-909-11 SPEAKER (100W102//C)
12
SRS-ZP1000
NOTE:
•
Due to standardization, replacements in the
parts list may be different from the parts
specified in the diagrams or the components
used on the set.
parts list may be different from the parts
specified in the diagrams or the components
used on the set.
•
-XX, -X mean standardized parts, so they may
have some difference from the original one.
have some difference from the original one.
•
Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering
these items.
are seldom required for routine service. Some
delay should be anticipated when ordering
these items.
•
CAPACITORS:
uF:
uF:
µ
F
•
RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
•
Accessories are given in the last of this parts list.
•
COILS
uH:
uH:
µ
H
•
SEMICONDUCTORS
In each case, u:
In each case, u:
µ
, for example:
uA...:
µ
A... , uPA... ,
µ
PA... ,
uPB... ,
µ
PB... , uPC... ,
µ
PC... ,
uPD...,
µ
PD...
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
SECTION 4
ELECTRICAL PARTS LIST
When indicating parts by reference number,
please include the board name.
please include the board name.
The components identified by mark
0
or dotted
line with mark
0
are critical for safety.
Replace only with part number specified.
A-1104-206-A AMP BOARD, COMPLETE (US)
A-1104-207-A AMP BOARD, COMPLETE (AEP, UK, CH)
A-1104-207-A AMP BOARD, COMPLETE (AEP, UK, CH)
********************
3-254-143-11 SCREW (B3), (+) BV TAPPING
3-254-150-01 SCREW (M3), (+) P
3-254-150-01 SCREW (M3), (+) P
< CAPACITOR >
C501
1-124-252-00 ELECT
0.33uF
20%
50V
C502
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
C503
1-115-185-11 CERAMIC CHIP
0.033uF
10%
50V
C504
1-162-962-11 CERAMIC CHIP
470PF
10%
50V
C505
1-162-961-11 CERAMIC CHIP
330PF
10%
50V
C506
1-162-962-11 CERAMIC CHIP
470PF
10%
50V
C507
1-100-155-91 CERAMIC CHIP
470PF
5%
100V
C508
1-131-696-11 FILM
0.22uF
5%
50V
C509
1-107-712-11 ELECT
3.3uF
20%
50V
C510
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
C511
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
C513
1-136-165-00 FILM
0.1uF
5%
50V
C601
1-124-252-00 ELECT
0.33uF
20%
50V
C602
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
C603
1-115-185-11 CERAMIC CHIP
0.033uF
10%
50V
C604
1-162-962-11 CERAMIC CHIP
470PF
10%
50V
C605
1-162-961-11 CERAMIC CHIP
330PF
10%
50V
C606
1-162-962-11 CERAMIC CHIP
470PF
10%
50V
C607
1-100-155-91 CERAMIC CHIP
470PF
5%
100V
C608
1-131-696-11 FILM
0.22uF
5%
50V
C609
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
C610
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
C611
1-136-165-00 FILM
0.1uF
5%
50V
C701
1-126-951-11 ELECT
470uF
20%
35V
C702
1-126-951-11 ELECT
470uF
20%
35V
C703
1-115-339-11 CERAMIC CHIP
0.1uF
10%
50V
C704
1-115-339-11 CERAMIC CHIP
0.1uF
10%
50V
C705
1-136-165-00 FILM
0.1uF
5%
50V
C706
1-136-165-00 FILM
0.1uF
5%
50V
C707
1-126-960-11 ELECT
1uF
20%
50V
C708
1-100-566-91 CERAMIC CHIP
0.1uF
10%
25V
C709
1-100-566-91 CERAMIC CHIP
0.1uF
10%
25V
C710
1-162-975-11 CERAMIC CHIP
24PF
5%
50V
C711
1-104-329-11 CERAMIC CHIP
0.1uF
10%
50V
C712
1-104-329-11 CERAMIC CHIP
0.1uF
10%
50V
C713
1-115-339-11 CERAMIC CHIP
0.1uF
10%
50V
C714
1-126-964-11 ELECT
10uF
20%
50V
C715
1-126-947-11 ELECT
47uF
20%
35V
C716
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
C717
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
C718
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
C719
1-162-964-11 CERAMIC CHIP
0.001uF
10%
50V
C901
1-119-939-51 ELECT
6800uF
20%
35V
C902
1-119-939-51 ELECT
6800uF
20%
35V
C903
1-126-948-11 ELECT
100uF
20%
35V
C904
1-126-948-11 ELECT
100uF
20%
35V
C905
1-115-339-11 CERAMIC CHIP
0.1uF
10%
50V
C906
1-115-339-11 CERAMIC CHIP
0.1uF
10%
50V
C907
1-163-021-91 CERAMIC CHIP
0.01uF
10%
50V
C908
1-163-021-91 CERAMIC CHIP
0.01uF
10%
50V
C909
1-126-947-11 ELECT
47uF
20%
35V
C910
1-126-947-11 ELECT
47uF
20%
35V
C911
1-130-777-00 MYLAR
0.1uF
5%
100V
C912
1-130-777-00 MYLAR
0.1uF
5%
100V
C913
1-130-777-00 MYLAR
0.1uF
5%
100V
C914
1-130-777-00 MYLAR
0.1uF
5%
100V
C915
1-136-175-00 FILM
0.68uF
5%
50V
C916
1-136-175-00 FILM
0.68uF
5%
50V
< CONNECTOR >
CN101
1-691-766-11 PLUG (MICRO CONNECTOR) 4P
* CN201
1-564-517-11 PLUG, CONNECTOR 2P
* CN901
1-564-321-21 PIN, CONNECTOR (3.96mm PITCH) 2P
< DIODE >
D701
8-719-988-61 DIODE 1SS355TE-17
D702
8-719-988-61 DIODE 1SS355TE-17
D703
8-719-988-61 DIODE 1SS355TE-17
D901
8-719-030-52 DIODE 1N5402
D902
8-719-030-52 DIODE 1N5402
D903
8-719-030-52 DIODE 1N5402
D904
8-719-030-52 DIODE 1N5402
< FUSE >
0 F901
1-532-464-33 FUSE (T2.5AL/250V) (AEP, UK, CH)
0 F901
1-533-450-12 FUSE, GLASS TUBE (DIA. 5) (T2.5AL/125V)(US)
0 F902
1-532-464-33 FUSE (T2.5AL/250V) (AEP, UK, CH)
0 F902
1-533-450-12 FUSE, GLASS TUBE (DIA. 5) (T2.5AL/125V)(US)
< FERRITE BEAD >
FB501
1-400-150-21 FERRITE, EMI (SMD) (4516)
FB503
1-400-150-21 FERRITE, EMI (SMD) (4516)
FB601
1-400-150-21 FERRITE, EMI (SMD) (4516)
AMP
Ver. 1.2
•
Abbreviation
CH: Chinese model
CH: Chinese model
Click on the first or last page to see other SRS-ZP1000 service manuals if exist.