DOWNLOAD Sony SCD-XB770 Service Manual ↓ Size: 6.98 MB | Pages: 86 in PDF or view online for FREE

6

This section is extracted from
instruction manual.

6

A

Press to open the disc tray

7

H

Press to start play.

.

8

X

Press to pause play.

9

x

Press to stop play.

0

l

L

When you turn the  l AMS L dial
counterclockwise by one click, you go back to the
preceding track; when you turn the  l AMS L
dial clockwise by one click, you go to the succeeding
track.

qa

m

M

Press to locate a portion you want to play within a
track.

qs

Shows  various information.

qd

Press to select the playback area when the 2 channel +
Multi-channel Super Audio CD (page 13) is loaded.

qf

Press to enter the menu.

qg

Adjust the headphones volume.

qh

Connect the headphones.

During playback of a Multi-channel Super Audio CD, 
the same signal that is output from the ANALOG
5.1CH FRONT L/R jacks is output from the PHONES
jack.

1

Press to turn on the player.

2

Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.

3

Each time you press the button, ”SACD“ or ”CD“
appears in the display. Select the type of CD you want
to play.

4

Press A OPEN/CLOSE to open/close the disc tray.

5

Turns on when you turn on the player, or when the
Multi-channel Super Audio CD is loaded and select
the Multi-channel playback area by pressing MULTI/
2CH.

1

Connect to an audio component (stereo/2 channel)
using the audio connecting cord.

2

Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier, 
etc.) using the audio connecting cords.

3

Connect to an audio component using the coaxial
digital cable.

4

Connect to an audio component using an optical
digital cable.

ANALOG

L

L

R

R

2CH OUT

5.1CH OUT

OUT

FRONT

COAXIAL OPTICAL

SURR

CENTER

SUB

WOOFER

DIGITAL(CD)

Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 3  and 4. Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT.

7

CONTINUE SHUFFLE

PLAY MODE

PROGRAM

SACD/CD

1

2

3

4

5

6

7

8

10/0

9

TIME/TEXT

REPEAT

AMS

B

A

CLEAR

>10

ENTER

MODE

DISPLAY/

MULTI/2CH

INDEX

LEVEL

ADJ

CHECK

1

Press to resume normal play from Shuffle Play or
Programme Play. 

Press to select Shuffle Play.

Press to select Programme Play.

2

Press to turn off the information.

3

Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.

4

Press  to enter the track numbers.

5

i

Press to locate a track numbered over 10.

6

Press repeatedly to play all tracks or only one track on
the disc.

7

y

Press to select Repeat A-B Play.

8

H

Press  to start play.

X

Press to pause play .

x

Press to stop play.

9

.

> 

Press to locate a specific track.

0

m

M

Press to locate a portion you want to play within a
track.

qa

>

.

Press to locate a specific point marked with an index
signal when you play a disc that has index signals.

qs

Each time you press the button, ”SACD“ or ”CD“
appears in the display. Select the type of CD you want
to play.

qd

Press to select the playback ar ea when the 2 channel +
Multi-channel Super Audio CD (page 13) is loaded. 

qf

Press to decide the selection.

qg

Press to delete a programmed track number.

qh

Press to adjust the output level balance for the Multi-
channel management function (page 22).

qj

Press to check the programmed order.

8

You can play the following discs with this player

.

Depending on the type of disc to be played, select the
appropriate indicator by pressing SACD/CD or MULTI/
2CH (pages  14).

This disc consists of a single HD (high density) layer.
When you play this disc, the player is set to the Super
Audio CD playback mode automatically

.

This disc consists of dual HD layers and is capable of
extended play over long periods.
When you play this disc, the player is set to the Super
Audio CD playback mode automatically.
Also, as the dual layer disc consists of dual HD layers on
one side only, it is not necessary to turn the disc over.

This disc is the standard format.
When you play this disc, the player is set to the
Conventional CD playback mode automatically.

This disc consists of an HD layer and a CD layer. Press
SACD/CD to select the layer you want to listen to. Also,
as the dual layers ar e on one side, it is not necessary to
turn the disc over. You can play the CD layer using a
conventional CD player.

This disc consists of the 2 channel playback area.
When you play this disc, the player is set to the 2 channel
playback mode automatically.

This disc consists of the multi-channel playback area.
When you play this disc, the player is set to the multi-
channel playback mode automatically.

This disc consists of the 2 channel playback area and the
multi-channel playback area.
Press MULTI/2CH to select the playback area you want to
listen to.

You can select the default playback area (2 channel
playback or multi-channel playback area). 

l

L

l

L

The current playback area appears.

l

L

l

L

This player cannot play the following discs. If you try to
play them, the error message “TOC Error” or “NO DISC”
will appear or there will be no sound.
• CD-ROM
• DVD, etc.

9

• This set can be disassembled in the order shown below.

3-2. COVER

(Page 9)

3-3. FRONT PANEL SECTION

(Page 9)

3-6. BASE UNIT

(DVBU-6)
(Page 11)

3-5. MECHANISM DECK

(CDM66B-DVBU6)
(Page 10)

3-4. AUDIO BOARD, 

MAIN BOARD
(Page 10)

SET