DOWNLOAD Sony SCD-XA777ES Service Manual ↓ Size: 12.67 MB | Pages: 127 in PDF or view online for FREE

8

When installing the audio module block, insert the audio module block as shown below.

audio module block

MAIN board

wire (flat type)

heatsink

A-POWER board

Heatsink gets heated up to a high temperature.
Be careful to keep the position of wire (flat type).

B

 FRONT

9

This section is extracted from
instruction manual.

1

ANALOG 5.1CH OUT jacks (5)
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.

2

DIGITAL (CD) OUT COAXIAL connector (7)
Connect to an audio component using the coaxial
digital cable.

3

DIGITAL (CD) OUT OPTICAL connector (7)
Connect to an audio component using an optical
digital cable.

4

AC IN terminal (7)
Connect the AC power cord.

5

ANALOG 2CH OUT L/R jacks (6)
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.

Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 2 and 3. Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT.

ANALOG

L

L

R

R

R

L

5.1CH OUT

2CH OUT

OUT

OPTICAL

COAXIAL

CENTER

FRONT

SURROUND

SUB WOOFER

DIGITAL(CD)

AC IN

CONTINUE SHUFFLE

PLAY MODE

PROGRAM

SACD/CD

1

2

3

4

5

6

7

8

10/0

9

TIME/TEXT

REPEAT

AMS

B

A

CLEAR

>10

ENTER

MODE

DISPLAY/

MULTI/2CH

INDEX

LEVEL

ADJ

CHECK

1

CONTINUE button (20)
Press to resume normal play from Shuffle Play or
Programme Play.

SHUFFLE button (20)
Press to select Shuffle Play.

PROGRAM button (21)
Press to select Programme Play.

2

DISPLAY MODE button (16)
Press to turn off the information.

3

TIME/TEXT button (15)
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.

4

Number buttons (18)
Press to enter the track numbers.

5

i

Press to locate a track numbered over 10.

6

REPEAT button (19)
Press repeatedly to play all tracks or only one track on
the disc.

7

AyB button (20)
Press to select Repeat A-B Play.

8

H button (14)
Press to start play.
X button (14)
Press to pause play.
x button (14)
Press to stop play.

9

./> (AMS: Automatic Music Sensor)

buttons (18)
Press to locate a specific track.

0

m/M buttons (18)
Press to locate a portion you want to play within a
track.

qa

INDEX >/. buttons (18)
Press to locate a specific point marked with an index
signal when you play a disc that has index signals.

qs

SACD/CD button (14)
Each time you press the button, ”SACD“ or ”CD“
appears in the display. Select the type of CD you want
to play.

qd

MULTI/2CH button (14)
Press to select the playback area when the 2 channel +
Multi-channel Super Audio CD (page 13) is loaded.

qf

ENTER button (25)
Press to decide the selection.

qg

CLEAR button (21)
Press to delete a programmed track number.

qh

LEVEL ADJ button (25)
Press to adjust the output level balance for the Multi-
channel management function (page 23).

qj

CHECK button (21)
Press to check the programmed order.

7

TIME/TEXT button (15)
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.

8

MENU (13)
Press to enter the menu.

9

MULTI/2CH button (with an LED) (14)
Each time you press the button while the 2 channel +
Multi-channel Super Audio CD (page 13) is loaded,
the playback area changes between the multi-channel
playback area (the LED turns on) and 2 channel
playback area (the LED turns off).

0

SACD/CD button (with an LED) (14)
Each time you press the button while the Hybrid disc
(page 13) is loaded, the layer changes between the HD
layer (the LED turns on) and CD layer (the LED turns
off).

qa

Display window (15)
Shows various information.

qs

N button (14)
Press to start play.

N indicator
Lights up during playback.

qd

X button (14)
Press to pause play.

X indicator
Lights up during pause.

qf

x button (14)
Press to stop play.

qg

l AMS L dial (AMS: Automatic Music Sensor)
(13)
When you turn the l AMS L dial
counterclockwise by one click, you go back to the
preceding track; when you turn the l AMS L
dial clockwise by one click, you go to the succeeding
track.

1

POWER switch (14)
Press to turn on the player.

2

3

Disc tray (14)
Press A OPEN/CLOSE to open/close the disc tray.

4

A OPEN/CLOSE button (14)
Press to open the disc tray.

5

PHONES
Connect the headphones.
During playback of a Multi-channel Super Audio CD,
no signal of the Multi-channel signal is output from
the PHONES jack (see page 7).

6

PHONE LEVEL
Adjust the headphones volume.

10

• This set can be disassembled in the order shown below.

3-2. CASE (TOP)

(Page 11)

3-4. FRONT PANEL 

SECTION
(Page 12)

3-7. DISC TABLE, BELT,

LOADING MOTOR (M1)
(Page 13)

3-8. OPTICAL PICK-UP

 (KHM-230AAA/J1NP)
(Page 14)

3-9. BASE UNIT

 (DVBU4B)
(Page 15)

3-3. LOADING PANEL ASSY

(Page 11)

3-6. MECHANISM DECK

(CDM19JB-DVBU4B/
CDM19JN-DVBU4B),
RF BOARD
(Page 13)

3-3. LOADING PANEL 

ASSY
(Page 11)

3-5. MAIN BOARD, 

BRACKET (MAIN)
(Page 12)

SET

Note 1: The process described in     can be performed in any order.

Note 2: Without completing the process described in     , the next process can not be performed.

Note 3: Illustration of disassembly is omitted.

11

 Follow the disassembly procedure in the numerical order given.

1

three screws
(flat head)

7

two screws
(3 

×

 8)

9

side plate (right)

8

two screws
(flat head)

2

two screws
(flat head)

3

case (top)

4

two screws
(3 

×

 8)

5

two screws
(flat head)

6

side plate (left)

5

loading panel assy

4

bracket (loading panel)

3

two screws
(P3 

×

 10)

1

Insert a tapering driver in the hole
at the bottom of the unit,
turn the cover (CAM) fully in the
direction of arrow 

A

.

tapering driver

cover (CAM)

A

2