Sony SCD-XA333ES Service Manual ▷ View online
4
SCD-XA333ES
HOW TO OPEN THE DISC TABLE WHEN POWER SWITCH TURNS OFF
disc table
loading panel assy
tapering driver
cover (CAM)
2
Draw out the loading panel assy
in the direction of arrow
in the direction of arrow
B
.
1
Insert a tapering driver in the hole
at the bottom of the unit,
turn the cover (CAM) fully in the
direction of arrow
at the bottom of the unit,
turn the cover (CAM) fully in the
direction of arrow
A
.
B
A
OPTICAL PICK-UP SERVICE POSITION
Place the insulator on the MAIN board, then install the base unit (DVBU4B) on it as shown in the figure.
base unit
(DVBU4B)
(DVBU4B)
MAIN board
insulator
5
SCD-XA333ES
CABLE SETTING
When connecting the cable from transformer to POWER board, set it as shown in the figure.
CN452
POWER board
clamp wire
CN422
CN401
transformer
6
SCD-XA333ES
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
7
TIME/TEXT button (15)
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
8
MENU (13)
Press to enter the menu.
Press to enter the menu.
9
MULTI/2CH button (with an LED) (14)
Each time you press the button while the 2 channel+
Multi-channel Super Audio CD (page 13) is loaded,
the playback area changes between the multi-channel
playback area (the LED turns on) and 2 channel
playback area (the LED turns off).
Each time you press the button while the 2 channel+
Multi-channel Super Audio CD (page 13) is loaded,
the playback area changes between the multi-channel
playback area (the LED turns on) and 2 channel
playback area (the LED turns off).
0
SACD/CD button (with an LED) (14)
Each time you press the button while the Hybrid disc
(page 13) is loaded, the layer changes between the HD
layer (the LED turns on) and CD layer (the LED turns
off).
Each time you press the button while the Hybrid disc
(page 13) is loaded, the layer changes between the HD
layer (the LED turns on) and CD layer (the LED turns
off).
qa
Display window (15)
Shows various information.
Shows various information.
qs
N
button (14)
Press to start play.
N
indicator
Lights up during playback.
qd
X
button (14)
Press to pause play.
X
indicator
Lights up during pause.
qf
x
button (14)
Press to stop play.
qg
l
AMS L dial (AMS: Automatic Music Sensor)
(13)
When you turn the l AMS L dial
counterclockwise by one click, you go back to the
preceding track; when you turn the l
When you turn the l AMS L dial
counterclockwise by one click, you go back to the
preceding track; when you turn the l
AMS
L
dial clockwise by one click, you go to the succeeding
track.
track.
POWER
PHONES
PHONE LEVEL
MIN
MAX
TIME/TEXT
SACD/CD
OPEN/CLOSE
AMS
PUSH ENTER
MULTI/2CH
MENU
AMS
1
POWER switch (14)
Press to turn on the player.
Press to turn on the player.
2
Remote sensor
(4)
3
Disc tray (14)
Press A OPEN/CLOSE to open/close the disc tray .
Press A OPEN/CLOSE to open/close the disc tray .
4
A
OPEN/CLOSE button (14)
Press to open the disc tray .
5
PHONES
Connect the headphones.
During playback of a Multi-channel Super Audio CD,
the same signal that is output from the ANALOG
5.1CH FRONT L/R jacks is output from the PHONES
jack.
Connect the headphones.
During playback of a Multi-channel Super Audio CD,
the same signal that is output from the ANALOG
5.1CH FRONT L/R jacks is output from the PHONES
jack.
6
PHONE LEVEL
Adjust the headphones volume.
Adjust the headphones volume.
Front Panel Parts Descriptions
7
SCD-XA333ES
Rear Panel Parts Descriptions
1
ANALOG 5.1CH OUT jacks (5)
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
2
DIGITAL (CD) OUT COAXIAL connector (7)
Connect to an audio component using the coaxial
digital cable.
Connect to an audio component using the coaxial
digital cable.
3
DIGITAL (CD) OUT OPTICAL connector (7)
Connect to an audio component using an optical
digital cable.
Connect to an audio component using an optical
digital cable.
5
ANALOG 2CH OUT L/R jacks (6)
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
AL(CD)
ANALOG
L
L
R
R
2CH OUT
5.1CH OUT
OUT
FRONT
COAXIAL
OPTICAL
SURR
CENTER
SUB
WOOFER
DIGITAL(CD)
Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 2 and 3. Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT
DIGITAL (CD) OUT connectors shown in 2 and 3. Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT
.