DOWNLOAD Sony SCD-CE775 Service Manual ↓ Size: 6.46 MB | Pages: 97 in PDF or view online for FREE

8

Super Audio CD + CD (Hybrid disc)
This disc consists of an HD layer and a CD layer. Press
SACD/CD to select the layer you want to listen to. Also,
as the dual layers are on one side, it is not necessary to
turn the disc over. You can play the CD layer using a
conventional CD player.

You can select the default playback layer (HD or CD).

Turn l AMS L to until “LAYER SELECT”
appears in the display.

Press l AMS L.
The current default layer appears.

Turn lAMSL to select CD or SACD, then push
l

AMSL again.

The default layer setting is SACD.

2 channel Super Audio CD
This disc consists of the 2 channel playback area.
When you play this disc, the player is set to the 2 channel
playback mode automatically.

Multi-channel Super Audio CD
This disc consists of the multi-channel playback area.
When you play this disc, the player is set to the multi-
channel playback mode automatically.

You can play the following discs with this player.
Depending on the type of disc to be played, select the
appropriate indicator by pressing SACD/CD or MULTI/
2CH (pages 12).

Super Audio CD (single layer disc)
This disc consists of a single HD (high density) layer.
When you play this disc, the player is set to the Super
Audio CD playback mode automatically.

Super Audio CD (dual layer disc)
This disc consists of dual HD layers and is capable of
extended play over long periods.
When you play this disc, the player is set to the Super
Audio CD playback mode automatically.
Also, as the dual layer disc consists of dual HD layers on
one side only, it is not necessary to turn the disc over.

Conventional CD
This disc is the standard format.
When you play this disc, the player is set to the
Conventional CD playback mode automatically.

2 channel + Multi-channel Super Audio CD
This disc consists of the 2 channel playback area and the
multi-channel playback area.
Press MULTI/2CH to select the playback area you want to
listen to.

You can select the default playback area (2 channel
playback or multi-channel playback area).

Turn l AMS L to until “M/2CH SELECT”
appears in the display.

Press l AMS L.
The current playback area appears.

Turn l AMS L to select desired playback area,
then press l AMS L.

This player cannot play the following discs. If you try to
play them, the error message “TOC Error” or “No Disc”
will appear or there will be no sound.
• CD-ROM
• DVD, etc.

9

• This set can be disassembled in the order shown below.

3-2. CASE (409538)

(Page 10)

3-3. FRONT PANEL SECTION

(Page 10)

3-8. BASE UNIT (DVBU5A)

(Page 13)

3-9. TABLE ASSY

(Page 13)

3-6. POWER BOARD

(Page 12)

3-5. AUDIO BOARD

(Page 11)

3-5. AUDIO BOARD

(Page 11)

3-7. MAIN BOARD

(Page 12)

3-4. CD MECHANISM DECK

(CDM59A-DVBU5A)
(Page 11)

3-4. CD MECHANISM DECK

(CDM59A-DVBU5A)
(Page 11)

3-10.SENSOR BOARD

(Page 14)

3-11.LOADING MOTOR BOARD

(Page 14)

SET

Note 1: The process described in     can be performed in any order.

Note 2: Without completing the process described in     , the next process can not be performed.

Note 3: Illustration of disassembly is omitted.

10

 Follow the disassembly procedure in the numerical order given.

1

two screws
(case3 TP2)

3

case (409538)

2

two screws
(BVTP3 

×

 8)

1

two screws
(case3 TP2)

6

connector
(CN601)

8

claw

7

four screws
(BVTP3 

×

 8)

9

front panel section

Note: When removing the loading panel, 
refer to "Section 1. Servicing Notes" on page 4.

1

loadind panel

8

claw

5

connector
(CN881)

4

connector
(CN153)

2

wire (flat type) (12 core)
(CN706)

3

connector
(CN104)

11

6

three screws
(BVTP3 

×

 8)

8

wire (flat type) (30 core)
(CN708)

5

screw
(BVTP3 

×

 8)

5

two screws
(BVTP3 

×

 8)

4

screw
(BVTP3 

×

 8)

3

Slide the tray until the screw
that fixes the table assy  can be
seen through around hole 
in the table assy.

2

Insert a tapering driver from the bottom of the chassis, 
and turn it in the direction of the arrow until the base unit
goes down to the lowest position.

7

9

CD mechanism deck
(CDM59A-DVBU5A)

a

a

1

connector
(CN705)

6

AUDIO board

2

connector
(CN301)

1

wire (flat type) (19 core)
(CN701)

1

wire (flat type) (19 core)
(CN702)

3

connector (CN704)

5

four screws
(BVTP3 

×

 8)

4

five screws
(BVTP3 

×

 8)