DOWNLOAD Sony SCD-C555ES Service Manual ↓ Size: 16.88 MB | Pages: 93 in PDF or view online for FREE

Model
SCD-C555ES
Pages
93
Size
16.88 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
scd-c555es.pdf
Date

Sony SCD-C555ES Service Manual ▷ View online

47
SCD-C555ES
• MAIN BOARD  IC801  CXD2752R (DSP DECODER)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
I/O
I
I
I
O
O
O
I
I
I
O
O
O
O
O
O
O
O
O
O
O
O
I
Ipu
O
Ipu
Ipu
I
I
I
O
O
O
O
O
O
O
O
O
Description
Ground terminal for core.
Latch input terminal for microcomputer serial communication. Latches address and data at falling this signal.
Shift clock input terminal for microcomputer serial communication. Reads and shifts serial input data at the
rise-up of the clock that is input into this terminal. When reading out, read data changes at falling of clock that
inputs into this terminal.
Data input terminal for microcomputer serial communication. Inputs data and address with serial from
microcomputer.
Power terminal for core. Supply +2.5 V.
Date output terminal for microcomputer serial communication. Hi-Z excluding output.
Output ready flag for microcomputer serial communication. When completing, outputs “L”. Open drain.
Output enable terminal for microcomputer serial communication. When using tri-state buffer externally, activates
by this terminal. When outputs “MSDATO”, “L” is shown.
Reset terminal. Resets entire IC on “L”. Clock that is output from EXCK01, EXCK02 and LRCK of output
terminal, doesn’t stop in resetting.
Soft mute terminal. Soft-mutes audio output with “H” and releases it with “L”.
Master clock input terminal. Inputs clock with 768 Fs (33.8688 MHz).
Ground terminal for input and output.
External output clock terminal 1. Upon setting, outputs 768 Fs, 512 Fs, 256 Fs and 128Fs.
External output clock terminal 2. Upon setting, outputs 768 Fs, 512 Fs, 256 Fs and 128Fs.
1Fs(44.1kHz) clock output terminal.
Frame signal output terminal.
Power terminal for input and output. Supply +3.3 V.
Monitor output terminal. Upon setting of microcomputer, outputs a part of internal operation.
Monitor output terminal. Upon setting of microcomputer, outputs a part of internal operation.
Monitor output terminal. Upon setting of microcomputer, outputs a part of internal operation.
Monitor output terminal. Upon setting of microcomputer, outputs a part of internal operation.
Output terminal for testing. Keep open.
Output terminal for testing. Keep open.
Output terminal for testing. Keep open.
Output terminal for testing. Keep open.
Clock input terminal for testing. Fix “L”.
Input terminal for testing (pull-up). Keep open.
Ground terminal for core.
Output terminal for testing. Keep open.
Input terminal for testing (pull-up). Keep open.
Reset terminal for testing (pull-up). Input “power-on” reset signal or fix “L”.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Power terminal for core. Supply +2.5 V.
Output terminal for testing. Keep open.
Monitor terminal for DST related. Nothing is connected. For details, refer to part 3 DST_X_Bit of SACD
format book.
Output terminal for supplementary data (LSB).
Output terminal for supplementary data.
Output terminal for supplementary data.
Output terminal for supplementary data.
Ground terminal for input and output.
Output terminal for supplementary data.
Output terminal for supplementary data.
Power terminal for input and output. Supply +3.3 V.
Output terminal for supplementary data.
Pin Name
VSC
XMSLAT
MSCK
MSDATI
VDC
MSDATO
MSREADY
XMSDOE
XRST
SMUTE
MCKI
VSIO
EXCKO1
EXCKO2
LRCK
FRAME
VDIO
MNT0
MNT1
MNT2
MNT3
TESTO
TESTO
TESTO
TESTO
TCK
TDI
VSC
TDO
TMS
TRST
TEST1
TEST2
TEST3
VDC
TESTO
XBIT
SUPDT0
SUPDT1
SUPDT2
SUPDT3
VSIO
SUPDT4
SUPDT5
VDIO
SUPDT6
48
SCD-C555ES
Pin No.
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
Pin Name
SUPDT7
XSUPAK
VSC
TESTO
TESTI
TESTI
TESTO
VDC
TESTO
TESTO
BCKASL
VSDSD
BCKAI
BCKAO
PHREFI
PHREFO
ZDFL
DSAL
ZDFR
DSAR
VDDSD
ZDFC
DSAC
ZDFLFE
DSALFE
VSDSD
ZDFLS
DSALS
ZDFRS
DSARS
VDDSD
TESTO
TESTO
VSC
TESTO
TESTO
VDC
TESTO
TESTO
VSIO
TESTO
TESTI
TESTI
VDIO
TESTO
TESTO
TESTO
I/O
O
O
O
I
I
O
O
O
I
I
O
I
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
I
I
O
O
O
Description
Output terminal for supplementary data (MSB).
Output terminal for supplementary data acknowledge.
Ground terminal for core.
Output terminal for testing. Keep open.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Output terminal for testing. Keep open.
Power terminal for core. Supply +2.5 V.
Output terminal for testing. Keep open.
Output terminal for testing. Keep open.
Bit clock input/output selection terminal for DSD data output. “L” is input (slave) and “H” is output (Master).
Ground terminal for DSD data output.
Bit clock input terminal for DSD data output. When BCKASL is “L”, input bit clock into this terminal.
Bit clock output terminal for DSD data output. When BCKASL is “H”, bit clock is output from this terminal.
Phase reference signal input terminal for DSD output phase modulation.
Phase reference signal output terminal for DSD output phase modulation.
Zero data detection flag in channel R (when setting microcomputer). When no sound data keeps for 300 msec,
this flag changes to “H”.
Output terminal for DSD data in channel L.
Zero data detection flag in channel L (when setting microcomputer). When no sound data keeps for 300 msec,
this flag changes to “H”.
Output terminal for DSD data in channel R.
Power terminal for DSD data output. Supply a +3.3 V that is separated from other digital power source.
Zero data detection flag in channel C (when setting microcomputer). When no sound data keeps for 300 msec,
this flag changes to “H”.
DSD data output terminal in channel C.
Zero data detection flag in channel LFE (when setting microcomputer). When no sound data keeps for 300
msec, this flag changes to “H”.
DSD data output terminal in channel LFE.
Ground terminal for DSD data output.
Zero data detection flag in channel LS (when setting microcomputer). When no sound data keeps for 300 msec,
this flag changes to “H”.
DSD data output terminal in channel LS.
Zero data detection flag in channel RS (when setting microcomputer). When no sound data keeps for 300 msec,
this flag changes to “H”.
DSD data output terminal in channel RS.
Power terminal for DSD data output. Supply a +3.3 V that is separated from other digital power source.
Output terminal for testing. Keep open.
Output terminal for testing. Keep open.
Ground terminal for core.
Output terminal for testing. Keep open.
Output terminal for testing. Keep open.
Power terminal for core. Supply +2.5 V.
Output terminal for testing. Keep open.
Output terminal for testing. Keep open.
Ground terminal for input and output.
Output terminal for testing. Keep open.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Power terminal for input and output. Supply +3.3 V.
Output terminal for testing. Keep open.
Output terminal for testing. Keep open.
Output terminal for testing. Keep open.
49
SCD-C555ES
Pin No.
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
Pin Name
VSC
TESTI
TESTI
TESTI
TESTO
VDC
TESTI
TESTI
TESTI
TESTI
TESTI
TESTI
VSIO
TESTI
TESTI
TESTI
VDIO
WAD0
WAD1
WAD2
WAD3
VSIO
VSC
WAD4
WAD5
WAD6
WAD7
VDC
TESTI
WCK
WAVDD
WAVDD
WARFI
WAVRB
WAVSS
WAVSS
VSIO
DQ7
DQ6
DQ5
DQ4
VDIO
DQ3
DQ2
DQ1
DQ0
VSIO
DCLK
DCKE
I/O
I
I
Ipu
O
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Ai
Ai
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
O
O
Description
Ground terminal for core.
Input terminal for testing. Fix “H”.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “H”.
Input terminal for testing. Keep open.
Power terminal for core. Supply +2.5 V.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Ground terminal for input and output.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Input terminal for testing. Fix “L”.
Power terminal for input and output. Supply +3.3 V.
External A/D data input terminal for PSP physical disc marking detection (LSB). This terminal is not used for
internal A/D but is used only for connecting A/D to outside.
External A/D data input terminal for PSP physical disc marking detection.
External A/D data input terminal for PSP physical disc marking detection.
External A/D data input terminal for PSP physical disc marking detection.
Ground terminal for input and output.
Ground terminal for core.
External A/D data input terminal for PSP physical disc marking detection.
External A/D data input terminal for PSP physical disc marking detection.
External A/D data input terminal for PSP physical disc marking detection.
External A/D data input terminal for PSP physical disc marking detection (MSB).
Power terminal for core. Supply +2.5 V.
Input terminal for testing. Fix “L”.
Operation clock for PSP physical disc marking detection. Input PLL clock that supports 1T of RF.
A/D power terminal for PSP physical disc marking detection. Supply +2.5 V that is separated from other digital
power source.
A/D power terminal for PSP physical disc marking detection. Supply +2.5 V that is separated from other digital
power source.
Analog RF signal input terminal for PSP physical disc marking detection.Full scale is 2.5 V.
A/D bottom reference terminal for PSP physical disc marking detection. Voltage that is input into this terminal,
becomes a full scale at ground side of A/D.
A/D ground terminal for PSP physical disc marking detection.
A/D ground terminal for PSP physical disc marking detection.
Ground terminal for input and output.
Input and output terminal for SDRAM data (MSB).
Input and output terminal for SDRAM data.
Input and output terminal for SDRAM data.
Input and output terminal for SDRAM data.
Power terminal for input and output. Supply +3.3 V.
Input and output terminal for SDRAM data.
Input and output terminal for SDRAM data.
Input and output terminal for SDRAM data.
Input and output terminal for SDRAM data.
Ground terminal for input and output.
Clock output terminal for SDRAM.
Clock enable output terminal for SDRAM.
50
SCD-C555ES
Description
Write enable output terminal for SDRAM.. Connect it to XWE terminal of DRAM.
Column address strobe output terminal for SDRAM. Connect it to CAS terminal of SDRAM.
Row address strobe output terminal for SDRAM. Connect it to RAS terminal of SDRAM.
Power terminal for input and output. Supply +3.3 V.
Keep open.
Address output terminal for SDRAM ÅiMSBÅj.
Address output terminal for SDRAM.
Ground terminal for core.
Address output terminal for SDRAM.
Address output terminal for SDRAM.
Power terminal for core. Supply +2.5 V.
Address output terminal for SDRAM.
Address output terminal for SDRAM.
Address output terminal for SDRAM.
Address output terminal for SDRAM.
Ground terminal for input and output.
Address output terminal for SDRAM.
Address output terminal for SDRAM.
Address output terminal for SDRAM.
Address output terminal for SDRAM. (LSB).
Power terminal for input and output. Supply +3.3 V.
Data request output terminal that inputs into front end processor.
Input terminal for header flag that is output from front end processor.
Input terminal for data transmission clock that is output from front end processor.
Input terminal for data effective flag that is output from front end processor.
Input terminal for error flag that is output from front end processor.
Input terminal for stream data that is output from front end processor (LSB).
Input terminal for stream data that is output from front end processor.
Input terminal for stream data that is output from front end processor.
Input terminal for stream data that is output from front end processor.
Input terminal for stream data that is output from front end processor.
Input terminal for stream data that is output from front end processor.
Input terminal for stream data that is output from front end processor.
Input terminal for stream data that is output from front end processor (MSB).
I/O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
I
I
I
I
I
I
I
I
I
I
I
I
Pin Name
XWE
XCAS
XRAS
VDIO
TESTO
A11
A10
VSC
A9
A8
VDC
A7
A6
A5
A4
VSIO
A3
A2
A1
A0
VDIO
XSRQ
XSHD
SDCK
XSAK
SDEF
SD0
SD1
SD2
SD3
SD4
SD5
SD6
SD7
Pin No.
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
Page of 93
Display

Click on the first or last page to see other SCD-C555ES service manuals if exist.