DOWNLOAD Sony SCD-555ES Service Manual ↓ Size: 20.17 MB | Pages: 94 in PDF or view online for FREE

Model
SCD-555ES
Pages
94
Size
20.17 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
scd-555es.pdf
Date

Sony SCD-555ES Service Manual ▷ View online

4
Note:
 Follow the disassembly procedure in the numerical order given.
AUDIO/POWER  BOARDS  AND  RF  BOARD  SERVICE  POSITION
– BOTTOM  VIEW –
AUDIO board
POWER board
INSTALLATION TWO WIRES (FLAT TYPE) (25/35 CORE)
Note: When the wire (flat type) (35 core) is disconnected 
from the RF board, then it is again connected, 
disconnect the wire (flat type) (25 core) once, 
and reconnect the wire (flat type) (35 core) first.
wire (flat type) (35 core)
wire (flat type) (25 core)
RF board
1
Remove the case.
2
Turn over the set.
4
two bottom plates
3
four screws (3 
×
 8)
3
eight screws (3 
×
 8)
5
OPTICAL  PICK-UP  SERVICE  POSITION
Place the insulator on the MAIN board, then install the base unit (DVBU4) on it as shown in the figure.
MAIN  BOARD  SERVICE  POSITION
In checking the MAIN board, prepare jig (extension cable J-2501-155-A: 1.00 mm Pitch, 9 cores, Length 300 mm).
Note:
Be sure to ground the MAIN board with a lead wire when checking it.
base unit
(DVBU4)
MAIN board
insulator
lead wire
MAIN board
AUDIO board
connect jig (extension cable
J-2501-155-A) to the MAIN
board (CN902) and AUDIO 
board (CN308).
6
SECTION  2
GENERAL
This section is extracted from
instruction manual.
1
POWER switch (11)
Press to turn on/off the player.
2
Remote sensor 
 (4)
3
Disc tray (11)
Press A OPEN/CLOSE to open/
close the disc tray.
4 A
 OPEN/CLOSE button (11)
Press to open/close the disc tray.
5 x
 button (12)
Press to stop play.
6 X
 button (12)
Press to pause play.
X
 indicator
Lights up during pause.
7 N
 button (11)
Press to start play.
N
 indicator
Lights up during playback.
Front Panel Parts
Descriptions
8 l
AMSL dial (AMS:
Automatic Music Senser) (11)
When you turn the lAMSL
dial counterclockwise by one click,
you go back to the preceding track;
when you turn the lAMSL
dial clockwise by one click, you go
to the succeeding track.
9
Display window (12)
Shows various information.
0
SACD/CD button (with an LED)
(11)
Each time you press the button
while the Hybrid disc (page 11) is
loaded, the layer changes between
the HD layer (the LED turns on) and
CD layer (the LED turns off).
qa
DIGITAL OUT button (with an LED)
(5)
Press when a component is
connected to the DIGITAL (CD)
OUT connectors. Each time you
POWER
PHONES
PHONE LEVEL
MIN
MAX
TIME/TEXT
SACD/CD
OPEN/CLOSE
AMS
PUSH ENTER
DIGITAL OUT
FILTER
press the button, the DIGITAL OUT
mode changes between ON (the
digital signals can be output/the
LED turns on) and OFF (the digital
signals cannot be output/the LED
turns off). The digital signal can be
output only when you play a CD.
qs
FILTER button (18)
Press to select a digital filter type
when playing a CD.
qd
TIME/TEXT button (12)
Each time you press the button, the
playing time of the track, the total
remaining time on the disc, or TEXT
information appears in the display.
qf
PHONE LEVEL
Adjust the headphones volume.
qg
PHONES
Connect the headphones.
Rear Panel Parts Descriptions
COAXIAL
OUT
OPTICAL
DIGITAL (CD)
AC IN
R
OUT
L
ANALOG
1
ANALOG OUT jacks (5)
Connect to an audio component using the audio
connecting cord.
2
DIGITAL (CD) OUT COAXIAL connector (5)
Connect to an audio component using the coaxial
digital cable.
3
DIGITAL (CD) OUT OPTICAL connector (5)
Connect to an audio component using an optical
digital cable.
4
AC IN terminal (5)
Connect the mains lead.
Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 2 and 3. Those of
the Super Audio CD cannot be output through DIGITAL (CD)
OUT connectors.
7
Remote Parts Descriptions
CONTINUE SHUFFLE
PLAY MODE
PROGRAM
SACD/CD
1
2
3
4
5
6
7
8
10/0
9
TEXT
TIME/
LANGUAGE
REPEAT
AMS
CLEAR
B
A
CHECK
>10
CLEAR
MODE
DISPLAY/
DIGITAL/
FILTER
INDEX
1
CONTINUE button (17)
Press to resume normal play from Shuffle Play or
Programme Play.
SHUFFLE button (17)
Press to select Shuffle Play.
PROGRAM button (17)
Press to select Programme Play.
2
SACD/CD button (11)
Each time you press the button while the Hybrid disc
(page 11) is loaded, the layer changes between an HD
layer (the SACD/CD LED turns on) and CD layer (the
SACD/CD LED turns off).
3
DISPLAY MODE button (13)
Press to turn off the information.
4
Number buttons (14)
Press to enter the track numbers.
5 i
10 button (14)
Press to locate a track numbered over 10.
6
REPEAT button (16)
Press repeatedly to play all tracks or only one track on
the disc.
7 H
 button (11)
Press to start play.
X
 button (12)
Press to pause play.
x
 button (12)
Press to stop play.
8
AMS ./(AMS: Automatic Music Sensor)
buttons (14)
Press to locate a specific track.
9 m
/M buttons (15)
Press to locate a portion you want to play within a
track.
0
INDEX >/. buttons (15)
Press to locate a specific point marked with an index
signal when you play a disc that has index signals.
qa
TIME/TEXT button (12)
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
qs
LANGUAGE button (14)
Press to change the displayed language if the TEXT
disc has several languages.
qd
DIGITAL FILTER button (18)
Press to select a digital filter type when playing a CD.
qf
CLEAR button (17)
Press to delete a programmed track number.
qg
CHECK button (18)
Press to check the programmed order.
qh
AyB button (16)
Press to select Repeat A-B Play.
Page of 94
Display

Sony SCD-555ES Service Manual ▷ Download

  • DOWNLOAD Sony SCD-555ES Service Manual ↓ Size: 20.17 MB | Pages: 94 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony SCD-555ES in PDF for free, which will help you to disassemble, recover, fix and repair Sony SCD-555ES Audio. Information contained in Sony SCD-555ES Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.