Sony SA-WFS3 / SS-FS3 Service Manual ▷ View online
SA-WFS3/SS-FS3
5
2-3. FRONT PANEL BLOCK
Note:
Work after laying the set sideways.
4
2 Insert the jig (J-2501-238-A) into a space
made by inserting the screwdriver,
and raise the front panel assy gradually.
2 Insert the jig (J-2501-238-A) into a space
made by inserting the screwdriver,
and raise the front panel block gradually.
3 Raise the front panel block a little by little
from bottom to top of the set.
eight bosses
bottom side
1 Insert a flat-head screwdriver into a recess
in the bottom of the set
to raise the front panel assy a little.
5 front panel block
SA-WFS3/SS-FS3
6
• NOTE WHEN FRONT PANEL BLOCK IS INSTALLED
2 Fix in the cushion (saranet-A) after
connecting the wire (flat type) (15 core).
4
3 Arrange it so that the wire (flat type) (15 core) is
arranged in the upper part of the AMP block.
AMP block
1 Pass in bracket (holder) after passing the wire (flat type) (15 core)
from the hole of the cabinet assy.
bracket (holder)
– Rear side view –
hole of the cabinet assy
SA-WFS3/SS-FS3
7
2-4. BRACKET
(TOP)
2-5. S-AIR BOARD, TUNER (FM/AM)
2 twelve screws (BVTP3 u 8)
3 bracket (top)
1 screw (BVTP3 u 8)
5 connector
(CN1303)
4 wire (flat type)
(19 core) (CN1301)
9 S-AIR board
1 two screws (BVTP3 u 8)
2 bracket (S-AIR)
3 fabric non woven (15T25)
6 two screws (BVTP3 u 8)
7 two screws (BVTP2.6)
8 holder (S-AIR)
0 fabric non woven (15T25)
qa wire (flat type) (11 core)
qd tuner (FM/AM)
qs two screws (BVTP3 u 8)
SA-WFS3/SS-FS3
8
2-6. HDMI BOARD
clamp
clamp
2 connector
(CN3509)
1 wire (flat type)
(23 core) (CN3511)
6 HDMI board
3 seven screws (BVTT3 u 6)
4 three screws (BVTP3 u 8)
5 bracket (HDMI FR)
heatsink
Note: Arrange it when assembling it so that
the harness should not come in contact
with the heatsink.
– Top view –
Click on the first or last page to see other SA-WFS3 / SS-FS3 service manuals if exist.