Sony SA-WCT500 / SS-CT500 Service Manual ▷ View online
SA-WCT500/SS-CT500
8
• NOTE WHEN FRONT PANEL BLOCK IS INSTALLED
2 Fix in the cushion (saranet-A) after
connecting the wire (flat type) (15 core).
1 Pass in bracket (holder) after pulling out the wire (flat type) (15 core)
from the hole where inside of front panel assy is seen.
bracket (holder)
– Rear side view –
3 Bend the wire (flat type) (15 core) and harness
from the loud speaker (13 cm) to the this side,
and insert the AMP block in the cabinet assy
with they put on AMP block.
4
hole
AMP block
wire (flat type)
(15 core)
(15 core)
inside of
front panel
front panel
cabinet assy
SA-WCT500/SS-CT500
9
2-4. BRACKET
(TOP)
2-5. S-AIR BOARD, TUNER (FM/AM)
2 eleven screws (BVTP3 u 8)
3 bracket (top)
1 screw (BVTP3 u 8)
2 screw (BVTP3 u 8)
(Except US, Canadian)
5 connector
(CN1303)
4 wire (flat type)
(19 core) (CN1301)
9 S-AIR board
1 two screws (BVTP3 u 8)
2 bracket (S-AIR)
3 fabric non woven (15T25)
6 two screws (BVTP3 u 8)
7 two screws (BVTP2.6)
8 holder (S-AIR)
0 fabric non woven (15T25)
qa wire (flat type) (9 core)
(US, Canadian, Saudi Arabia models),
wire (flat type) (11 core)
(AEP, Russian, UK models)
qd tuner (FM/AM)
qs two screws (BVTP3 u 8)
SA-WCT500/SS-CT500
10
2-6. D-VIDEO BOARD
Note: Arrange it when assembling it so that
the harness should not come in contact
with the heatsink.
– Top view –
5 two screws
(BVTP3
u 8)
clamp
2 connector
(CN3506)
1 wire (flat type)
(23 core) (CN3000)
qa D-VIDEO board
3 connector
(CN3202)
4 seven screws (BVTT3 u 6)
6 three screws (BVTP3 u 8)
7 bracket (HDMI FR)
8 two HS holders
9 heatsink (S58F)
0 radiation sheet (F)
heatsink
harness
SA-WCT500/SS-CT500
11
2-7. MAIN BOARD
2-8. POWER BOARD
4 wire (flat type)
(25 core) (CN1014)
1 two screws (BVTP3 u 8)
3 wire (flat type)
(7 core) (CN1011)
5 connector
(CN521)
6 two connectors
(CN541, CN564)
7 two connectors
(CN566,
CN1006)
2 bracket (HDMI RR)
8 three screws (BVTP3 u 16)
9 heatsink (DDV)
0 six screws (BVTP3 u 8)
qa wire (flat type) (9 core) (CN1013)
(US, Canadian, Saudi Arabia models),
wire (flat type) (11 core) (CN1012)
(AEP, Russian, UK models)
qs wire (flat type)
(23 core) (CN1017)
qd wire (flat type)
(19 core) (CN1005)
qf MAIN board
8 bracket (power) block
3 twelve screws
(BVTP3
u 8)
1 connector
(CN1006)
qa POWER board
2 two screws
(BVTP3
u 8)
4 connector
(CN904)
5 power cord connector
(CN901)
6 nine screws
(BVTP3
u 8)
7 two PC board holders
9 fuse (F901)
(US, Canadian)
0 fuse rating label
Note: When MAIN board is replaced, spread the
compound referring to “NOTE OF RE-
PLACING THE IC340 AND IC400 ON THE
MAIN BOARD AND THE COMPLETE MAIN
BOARD” on servicing notes (page 4).
PLACING THE IC340 AND IC400 ON THE
MAIN BOARD AND THE COMPLETE MAIN
BOARD” on servicing notes (page 4).
Click on the first or last page to see other SA-WCT500 / SS-CT500 service manuals if exist.