DOWNLOAD Sony SA-WCT500 / SS-CT500 Service Manual ↓ Size: 5.51 MB | Pages: 108 in PDF or view online for FREE

Model
SA-WCT500 SS-CT500
Pages
108
Size
5.51 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
sa-wct500-ss-ct500.pdf
Date
PREV: Sony HT-FS3 Service Manual

Sony SA-WCT500 / SS-CT500 Service Manual ▷ View online

SA-WCT500/SS-CT500
7
2-3.  FRONT  PANEL  BLOCK
Note: Work after laying the set sideways.
4
2 Insert the jig (J-2501-238-A) into a space 
 
made by inserting the screwdriver, 
 
and raise the front panel assy gradually.
2 Insert the jig (J-2501-238-A) into a space 
 
made by inserting the screwdriver, 
 
and raise the front panel block gradually.
3 Raise the front panel block a little by little 
from bottom to top of the set.
eight bosses
bottom side
1 Insert a flat-head screwdriver into a recess 
 
in the bottom of the set
 
to raise the front panel assy a little.
5 front panel block
SA-WCT500/SS-CT500
8
•  NOTE  WHEN  FRONT  PANEL  BLOCK  IS  INSTALLED
2  Fix in the cushion (saranet-A) after 
 
connecting the wire (flat type) (15 core). 
1  Pass in bracket (holder) after pulling out the wire (flat type) (15 core) 
 
from the hole where inside of front panel assy is seen.  
bracket (holder)
– Rear side view –
3  Bend the wire (flat type) (15 core) and harness 
 
from the loud speaker (13 cm) to the this side, 
 
and insert the AMP block in the cabinet assy
 
with they put on AMP block.
4
hole
AMP block
wire (flat type)
(15 core)
inside of
front panel
cabinet assy
SA-WCT500/SS-CT500
9
2-4. BRACKET 
(TOP)
2-5.  S-AIR  BOARD,  TUNER (FM/AM)
2  eleven screws (BVTP3 u 8)
3 bracket (top)
1 screw (BVTP3 u 8)
2 screw (BVTP3 u 8)
(Except US, Canadian) 
5 connector 
 (CN1303)
4  wire (flat type) 
 
(19 core) (CN1301)
9 S-AIR board
1  two screws (BVTP3 u 8)
2 bracket (S-AIR)
3  fabric non woven (15T25)
6  two screws (BVTP3 u 8)
7  two screws (BVTP2.6)
8 holder (S-AIR)
0  fabric non woven (15T25)
qa  wire (flat type) (9 core)
 
(US, Canadian, Saudi Arabia models),
 
wire (flat type) (11 core)
 
(AEP, Russian, UK models)
qd tuner (FM/AM)
qs  two screws (BVTP3 u 8)
SA-WCT500/SS-CT500
10
2-6.  D-VIDEO  BOARD
Note: Arrange it when assembling it so that 
 
the harness should not come in contact 
 
with the heatsink. 
– Top view –
5 two screws 
 (BVTP3 
u 8)
clamp
2 connector 
 (CN3506)
1  wire (flat type) 
 
(23 core) (CN3000)
qa D-VIDEO board
3 connector 
 (CN3202)
4  seven screws (BVTT3 u 6)
6  three screws (BVTP3 u 8)
7  bracket (HDMI FR)
8  two HS holders
9 heatsink (S58F)
0  radiation sheet (F)
heatsink
harness
Page of 108
Display

Click on the first or last page to see other SA-WCT500 / SS-CT500 service manuals if exist.

RANDOM: