Sony SA-CRW55 / SA-P55H / SA-W55 / SS-CN5 / SS-F55H / SS-SR5 Service Manual ▷ View online
SA-CRW55/P55H/W55/SS-CN5/F55H/SR5
5
1-3. REAR COVER BLOCK (SA-W55)
Note: This illustration sees the set from rear side.
1-4. CONTROL BOARD (SA-W55)
6 connector
(CNP902)
7 power cord connector
(CNP901)
8 connector
(CNP912)
4 connector
(CNP602)
1 twelve screws
(3.5
u 20)
2 two screws
(BVTP3
u 8)
9 rear cover block
5 connector (E51, BR) (CNP906)
connector (except E51, BR) (CNP907)
3
(E51, BR)
2 two nuts
(supplied with RV101, RV102)
8 rear cover block
1 two knobs (VOL)
9 cushion
qd CONTROL board
5 two screws (3.5)
q; knob power
qa fuse label
4 connector
(CNP910)
3 screw (BVTP3 u 8)
Note: Tape etc. are wrapped and it pulls it
in the direction of the arrow at a dash.
– Rear side –
qs fuse (TA1L/250V) (except CND, BR) (F901)
glass cylindrical fuse (2.5A/125V) (CND) (F901)
fuse (T1.25AL/250V) (BR) (F901)
tape etc.
knob (VOL)
7 two washers
(supplied with RV101, RV102)
6
(CND, BR)
(E51, BR)
• Abbreviation
BR
BR
: Brazilian model
E51
: Chilean and Peruvian models
• Abbreviation
BR
BR
: Brazilian model
CND : Canadian model
E51
E51
: Chilean and Peruvian models
Ver. 1.1
SA-CRW55/P55H/W55/SS-CN5/F55H/SR5
6
1-5. GRILLE FRAME ASSY (SS-CN5)
Note 1:
Please set as shown in fi gure and work.
1-6. GRILLE FRAME ASSY (SS-SR5)
Note 1:
Please set as shown in fi gure and work.
total seven bosses
2 Insert the jig (Part No. J-2501-238-A) into a space
and raise the grille frame assy gradually.
bottom side
1 Insert a flat-head screwdriver into
a recess in the bottom of the set
to raise the grille frame assy a little.
to raise the grille frame assy a little.
Note 2: When using a jig, please work so as not
to injure grille frame assy and speaker
cabinet
assy.
2 Insert the jig (Part No. J-2501-238-A)
into a space and raise the grille frame
assy
gradually.
Note 2: When using a jig, please work so
as not to injure grille frame assy
and speaker cabinet assy.
2 Insert the jig (Part No. J-2501-238-A)
into a space and raise the grille frame
assy
gradually.
Note 2: When using a jig, please work so
as not to injure grille frame assy
and speaker cabinet assy.
3 All bosses are removed while
moving jig in the direction of
the arrow, and grille frame assy
is
removed.
3 All bosses are removed while
moving jig in the direction of
the arrow, and grille frame assy
is
removed.
grille frame assy
total four bosses
2 Insert the jig (Part No. J-2501-238-A) into a space
and raise the grille frame assy gradually.
bottom side
1 Insert a flat-head screwdriver into
a recess in the bottom of the set
to raise the grille frame assy a little.
Note 2: When using a jig, please work so as not
to injure grille frame assy and speaker
cabinet
assy.
2 Insert the jig (Part No. J-2501-238-A) into a space
and raise the grille frame assy gradually.
Note 2: When using a jig, please work so as not
to injure grille frame assy and speaker
cabinet
assy.
3 All bosses are removed while
moving jig in the direction of
the arrow, and grille frame assy
is
removed.
3 All bosses are removed while
moving jig in the direction of
the arrow, and grille frame assy
is
removed.
grille frame assy
SA-CRW55/P55H/W55/SS-CN5/F55H/SR5
7
1-7. LOUDSPEAKER (10 cm) (SS-F55H)
3 Insert a flat-head screwdriver into a recess
in the direction of the woofer ring
to raise the speaker cabinet assy a little.
(The boss four places are removed
to woofer ring 1 piece)
1 two bosses
four bosses
1 two bosses
2 grille frame assy
5 four screws
(3.5
u 16)
4 woofer ring
woofer ring
7 loudspeaker (10 cm)
(SP4)
These loudspeakers (10 cm)
(SP5, SP6) can be removed
as mutch on.
(SP5, SP6) can be removed
as mutch on.
6 two terminals
Note: Please exchange woofer ring
at the same time when you
exchange
loudspeaker.
These woofer rings can be removed
as mutch on.
as mutch on.
SA-CRW55/P55H/W55/SS-CN5/F55H/SR5
8
MEMO
Click on the first or last page to see other SA-CRW55 / SA-P55H / SA-W55 / SS-CN5 / SS-F55H / SS-SR5 service manuals if exist.