Sony NWZ-F804 / NWZ-F805 / NWZ-F805N / NWZ-F806N Service Manual ▷ View online
NWZ-F804/F805/F805N/F806/F806N
16
2-6. MAIN BOARD-1
guide line
MAIN board
3 sheet (cover)
sheet (cover)
5 touch panel flexible board
(CN7101)
touch panel flexible board
6 cover PWB sheet
cover PWB sheet
&RYHU3:%VKHHWVHWWLQJ
MAIN board
6KHHWFRYHUVHWWLQJ
guide line
2 Remove three solders of battery wire.
Note 2: When the battery assy (BAT1) is removed, refer to “ABOUT THE
HANDLING OF THE BATTERY ASSY (BAT1)” and “ABOUT THE
REPAIRING OF THE BATTERY ASSY (BAT1)” (page 4).
1 kapton sheet (PWB)
battery assy (BAT1)
guide line
MAIN board
kapton sheet (PWB)
black
white
red
%DWWHU\ZLUHVHWWLQJ
4 Open the connector
Note 3: Insert the red wire into the gap between
the battery assy (BAT1) and MAIN board.
NG
OK
Note 4: When installing the touch panel
flexible board, make sure that has
been inserted straight.
straight slanting
–%RWWRPUHDUVLGHYLHZ–
Note 1: When the MAIN board is replaced, refer to “NOTE THE MAIN BOARD REPLACING” (page 4) and “DESTINATION SETTING” (page 5).
NWZ-F804/F805/F805N/F806/F806N
17
2-7. MAIN BOARD-2
guide line
guide line
MAIN board
MAIN board
6 sheet
(PWB)
switch
switch
hole
switch
sheet (PWB)
sheet (PWB)
fold
6 sheet
(PWB)
1 sheet EMC (CN)
sheet EMC (CN)
2 LCD module flexible board
(CN6403)
LCD module flexible board
Sheet3:%VettLQJ
Sheet3:%VettLQJ
guide line
MAIN board
Sheet(0&&1VettLQJ
3 screw
(M1.4
u 1.4)
4 two claws
3 screw
(M1.4
u 1.4)
5 Remove the MAIN board block
in the direction of an arrow.
7 MAIN board
Note 2: When installing the MAIN board,
match the position of three switches
and three holes.
hole
hole
–%RttRPUeDUVLGeYLeZ–
Note 1: When the MAIN board is replaced, refer to “NOTE THE MAIN BOARD REPLACING” (page 4) and “DESTINATION SETTING” (page 5).
Ver. 1.1
NWZ-F804/F805/F805N/F806/F806N
18
2-8. BATTERY ASSY (BAT1)
2-9. SUPPORT
(MID)
– Bottom rear side view –
3 Peel off the adhesive
sheet (support M).
4 Remove the battery assy block
in the direction of an arrow.
5 battery assy (BAT1)
1 kapton sheet (PWB)
battery assy (BAT1)
battery assy (BAT1)
guide line
guide line
MAIN board
kapton sheet (PWB)
black
white
red
MAIN board
Batter\ wire settiQJ
Note 2: Insert the red wire into the gap between
the battery assy (BAT1) and MAIN board.
Note 3: When installing the battery assy (BAT1), press in the order
of
of
A - B in accordance with the guidelines.
A
B
2 Remove three solders of battery wire.
Note 1: When the battery assy (BAT1) is removed,
refer to “ABOUT THE HANDLING OF
THE BATTERY ASSY (BAT1)”
and “ABOUT THE REPAIRING OF
THE BATTERY ASSY (BAT1)” (page 4).
– Bottom rear side view –
1 sheet EMC
(chassis
sub)
sheet EMC
(chassis sub)
(chassis sub)
2 claw
3 support (MID)
support (MID)
2 claw
2 claw
LCD module
flexible board
flexible board
touch panel flexible board
guide line
6heet EMC (chassis sub) setting
NWZ-F804/F805/F805N/F806/F806N
19
2-10. CHASSIS (SUB) BLOCK
– Bottom rear side view –
3 screw
(P1.4
u 1.6)
3 screw
(P1.4
u 1.6)
2 Peel off the LCD flexible board adhesive tape.
1 Peel off two touch panel flexible board adhesive tapes.
3 two screws
(P1.4
u 1.6)
3 two screws
(P1.4
u 1.6)
hole
hole
boss
4 chassis (sub) block
Note: When installing the chassis (sub) block, match
the position of two holes and two bosses.
boss
LCD flexible board
LCD flexible board
LCD flexible board
adhesive tape
touch panel flexible board
touch panel flexible board
Flexible board setting
Step 1
Step 2
Step 4
Step 3
adhesive tape
adhesive tape
guide line
guide line
Click on the first or last page to see other NWZ-F804 / NWZ-F805 / NWZ-F805N / NWZ-F806N service manuals if exist.