Sony NWZ-A726 / NWZ-A726B / NWZ-A728 / NWZ-A728B / NWZ-A729 Service Manual ▷ View online
13
NWZ-A726/A726B/A728/A728B/A729
4-2-9. Sound pressure regulation level check
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” audio signal is output-
ted.
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” audio signal is output-
ted.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] key to select the “AUDIO”, and press the [
B
]
key to enter the minor item.
3. Press the [
v
]/[
V
] key to select the “SPCHK”.
4. Press the [
u
] key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 30”
audio signal is outputted.
liquid crystal display
AUDIO SPCHK
1kHz 0dBs L/Rch
HPOUT [ VOL: 30 ]
START
5. Press the [BACK] key, return to minor item selection screen.
4-3. Video
liquid crystal display
MPTAPP MENU
POWER
AUDIO
AUDIO
VIDEO — LCD
OTHER
CLESTE
DAC
SHUTDOWN
EXITTEST
CLESTE
DAC
SHUTDOWN
EXITTEST
4-3-1. LCD display check
Liquid crystal display is checked.
Liquid crystal display is checked.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] key to select the “VIDEO”, and press the [
B
]
key to select the “LCD”.
3. Press
the
[
u
] key, all black is displayed on the liquid crystal
display.
4. In this state, each time the [OPTION] key is pressed, the screen
display changes in the following order.
All black (default)
→ All red → All green → All blue → All
white
→ Color bar → Maximum drawing size confi rmation
→ diagonal gradation (red) → diagonal gradation (green) →
diagonal gradation (blue)
diagonal gradation (blue)
→ diagonal gradation (white)
Maximum drawing size confi rmation:
All blue (All sides are red) is displayed. Whether red in all
All blue (All sides are red) is displayed. Whether red in all
sides is seen is confi rmed.
5. In this state, each time the [VOL –] key is pressed, LCD back
light brightness min/max/middle switch is performed.
6. Press the [BACK] key, return to minor item selection screen.
4-4. Other
liquid crystal display
MPTAPP MENU
POWER
AUDIO
VIDEO
OTHER
AUDIO
VIDEO
OTHER
CLOCK
CLESTE
KEY
DAC
KETYNUM
SHUTDOWN
FORMAT
EXITTEST DEST
SPSET
FWVER
NCAPCHK
4-4-1. Clock check
The movement of an internal clock is confi rmed.
The movement of an internal clock is confi rmed.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] key to select the “OTHER”, and press the [
B
]
key to enter the minor item.
3. Press the [
v
]/[
V
] key to select the “CLOCK”.
4. Press the [
u
] key, date and time are displayed.
liquid crystal display
OTHER CLOCK
XX, XX XX XXXX
##:##:##.######
START
XX, XX XX XXXX : Date
##:##:##.######
##:##:##.######
: Time
“START” changes into “OK” if the movement of an internal
clock is confi rmed.
5. Press the [BACK] key, return to minor item selection screen.
14
NWZ-A726/A726B/A728/A728B/A729
4-4-2. Key check
The operation of the key is confi rmed.
The operation of the key is confi rmed.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] key to select the “OTHER”, and press the [
B
]
key to enter the minor item.
3. Press the [
v
]/[
V
] key to select the “KEY”.
4. Press the [
u
] key, all keys are displayed.
liquid crystal display
OTHER KEY
UP VOL+
REW PLAY FF VOL–
DOWN OPTION
HOLD BACK
START
5. The character corresponding to the key is selected every time
the key is pressed. “START” changes into “OK” if all keys are
pressed.
pressed.
6. Slide the [HOLD] key from ON to OFF, return to minor item
selection screen.
4-4-3. Frequency check that presses key
The frequency to which the key is pressed, insert/pull out frequen-
cy of cradle and insert/pull out frequency of the headphone are
displayed.
The frequency to which the key is pressed, insert/pull out frequen-
cy of cradle and insert/pull out frequency of the headphone are
displayed.
Note: Not used for the servicing.
4-4-4. Format
The user’s area is formatted, and ICV for the video and ICV for
audio are initialized.
The user’s area is formatted, and ICV for the video and ICV for
audio are initialized.
Note: Not used for the servicing.
Format the set from “Settings”
→ “Common settings” → “For-
mat” when it home menu in usually operates when the set should
format it.
format it.
4-4-5. Destination setting
The destination setting, language information, and sound pressure
regulation information are written in the NAND fl ash memory.
The destination setting, language information, and sound pressure
regulation information are written in the NAND fl ash memory.
Note: Not used for the servicing.
4-4-6. Sound pressure regulation setting
ON/OFF of sound pressure regulation is confi rmed.
ON/OFF of sound pressure regulation is confi rmed.
Note: Not used for the servicing.
4-4-7. Firmware version check
The fi rmware version is displayed.
The fi rmware version is displayed.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] key to select the “OTHER” and press the [
B
]
key to enter the minor item.
3. Press the [
v
]/[
V
] key to select the “FWVER”.
4. Press the [
u
] key, the fi rmware version is displayed.
liquid crystal display
OTHER FWVER
X.XX.XX
MODEL NAME
NWZ-####
SERIAL NO
@@@@@@@
X.XX.XX
: Firmware version
####
: Model name
@@@@@@@ : Serial No.
5. Press the [BACK] key, return to minor item selection screen.
15
NWZ-A726/A726B/A728/A728B/A729
4-4-8. NAND capacity check
Capacity of NAND fl ash memory, present bud block, maximum
bud block, and vender ID are displayed.
Capacity of NAND fl ash memory, present bud block, maximum
bud block, and vender ID are displayed.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] key to select the “OTHER”, and press the [
B
]
key to enter the minor item.
3. Press the [
v
]/[
V
] key to select the “NCAPCHK”.
4. Press the [
u
] key, capacity of NAND fl ash memory, present
bud block, maximum bud block, and vender ID are displayed.
liquid crystal display
OTHER NCAPCHK
XGB
BAD BLOCK
CUR (####)/MAX (@@@@)
VENDOR ($$$$)
X
: Capacity of NAND fl ash memory
4/8/16 (4 GB/8 GB/16 GB)
@@@@ : Number of present bud block
(It makes an error the acquisition of the number of
bud blocks at “–1”)
####
: Number of maximum bud block
(It makes an error the acquisition of the vender ID
at “–1”)
$$$$
: Vender ID of NAND fl ash memory
0x98/0xec (TOSHIBA/SAMSUNG)
(It makes an error the acquisition of the vender ID
at “–1”)
5. Press the [BACK] key, return to minor item selection screen.
4-5. CLESTE
liquid crystal display
MPTAPP MENU
POWER
AUDIO
VIDEO
OTHER
CLESTE
AUDIO
VIDEO
OTHER
CLESTE
WCABLE
DAC
WOCABLE
SHUTDOWN
EXITTEST
EXITTEST
4-5-1. Clear stereo setting (With cable)
This mode is according to an original sound playback, for adjust-
ment to right and left sound.
This mode is according to an original sound playback, for adjust-
ment to right and left sound.
Note: Not used for the servicing.
4-5-2. Clear stereo setting (No cable)
This mode is according to an original sound playback, for adjust-
ment to right and left sound.
This mode is according to an original sound playback, for adjust-
ment to right and left sound.
Note: Not used for the servicing.
4-6. DAC
liquid crystal display
MPTAPP MENU
POWER
AUDIO
VIDEO
OTHER
CLESTE
DAC
AUDIO
VIDEO
OTHER
CLESTE
DAC
B-GAIN
SHUTDOWN
T-GAIN
EXITTEST
4-6-1. BASS-Gain/Fc setting
This mode is adjustment for the sound of BASS when playback.
This mode is adjustment for the sound of BASS when playback.
Note: Not used for the servicing.
4-6-2. TREBLE-Gain/Fc setting
This mode is adjustment for the sound of TREBLE when play-
back.
This mode is adjustment for the sound of TREBLE when play-
back.
Note: Not used for the servicing.
4-7. Shutdown
Function that power supply of set can be turned off without ending
static test mode.
Function that power supply of set can be turned off without ending
static test mode.
Procedure:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] key to select the “SHUTDOWN”, and press
the [
B
] key to select the “SURE ?”.
3. Press the [
u
] key, turn the power off while having entered the
test mode.
16
NWZ-A726/A726B/A728/A728B/A729
MEMO
Click on the first or last page to see other NWZ-A726 / NWZ-A726B / NWZ-A728 / NWZ-A728B / NWZ-A729 service manuals if exist.