Sony NW-E99 Service Manual ▷ View online
4
NW-E99
4
As you did in step 3, adjust the settings
for “month” and “date.”
for “month” and “date.”
After rotating the Shuttle switch to adjust the
“date” setting and pressing the Nx button
to confirm, the display switches to the time
setting screen.
“date” setting and pressing the Nx button
to confirm, the display switches to the time
setting screen.
0 : 0 0
5
Rotate the Shuttle switch to adjust the
“hour” setting and press the Nx
button to confirm.
“hour” setting and press the Nx
button to confirm.
The “minute” digit blinks.
0 : 0 0
6
As you did in step 5, adjust the settings
for “minute.”
for “minute.”
After rotating the Shuttle switch to adjust the
“minute” setting and pressing the Nx
button to confirm, the display switches to the
time setting screen.
“minute” setting and pressing the Nx
button to confirm, the display switches to the
time setting screen.
D A
T E - T I M E
7
Press the MENU button.
The display returns to the normal screen.
Select [RETURN] in the menu screen or press the MENU
button.
button.
Press the MENU button and hold it.
You can display the current time while pressing the
button.
You can display the current time while pressing the
button.
Notes
• If the unit is not used for a long time, your settings of
the date and time may be reset.
• If the current time is not set, the display for the date and
time will be “-- --.”
• If PC CLK is set to “ON”, the time setting of your
Network Walkman is automatically adjusted to a
computer’s built-in clock when your Network Walkman
is connected to the computer.
computer’s built-in clock when your Network Walkman
is connected to the computer.
• Depending on the shipping area, the time display
format of the unit is set to a 12-hour display or a 24-
hour display.
You cannot switch between a 12-hour display and a 24-
hour display in the unit.
A 24-hour display is shown in this manual.
hour display.
You cannot switch between a 12-hour display and a 24-
hour display in the unit.
A 24-hour display is shown in this manual.
To cancel the menu mode
To display the current time
Adjusting the
current time
setting (DATE-
TIME)
current time
setting (DATE-
TIME)
You can set and display the current time.
1
Press the MENU button.
The menu screen is displayed.
R E P E A T
M O D E
>
2
Rotate the Shuttle switch to select
“DATE-TIME” and press the Nx
button to confirm.
“DATE-TIME” and press the Nx
button to confirm.
The “year” digit blinks.
2 0 0 4 y
1 m
1 d
3
Rotate the Shuttle switch to adjust the
“year” setting and press the Nx
button to confirm.
“year” setting and press the Nx
button to confirm.
The “month” digit blinks.
2 0 0 4 y
1 m
1 d
Gro
up
M
o
d
e
o
d
e
Shuttle switch
Press
(Confirm)
(Confirm)
Nx
button
MENU button
to (+/
>
)
to (
.
/–)
5
NW-E99
SECTION 2
TEST MODE
STANDING PROCEDURE
Procedure 1: Set a dry battery into NW-E99, and keep the battery
lid open.
Procedure 2: In HOLD state, while pushing Nx and [GROUP]
button, turn power on by closing the battery lid of
NW-E99.
NW-E99.
Procedure 3: Set HOLD state off.
After starting up test mode, the following contents can be checked.
TEST MODE
• Nx button
The KEY test mode is activated. All key inputs are completed,
then Nx button is pressed, restart. (Be aware that the
initialization is included on all key input.)
• [MENU] button
EL0 (blue) lights on/off.
• [GROUP] button
EL1 (green) lights on/off.
• -/>
All LCD lights and ACCESS LED lights off.
• ./+
All LCD lights and ACCESS LED lights on.
• [VOL +] button
BEEP turns on.
• [VOL --] button
BEEP turns off.
• [ REPEAT SOUND] button
Initialized. (Turns to the factory preset state, time, volume setting
and so on.)
The music data, files and so on in the memory are not changed.
The KEY test mode is activated. All key inputs are completed,
then Nx button is pressed, restart. (Be aware that the
initialization is included on all key input.)
• [MENU] button
EL0 (blue) lights on/off.
• [GROUP] button
EL1 (green) lights on/off.
• -/>
All LCD lights and ACCESS LED lights off.
• ./+
All LCD lights and ACCESS LED lights on.
• [VOL +] button
BEEP turns on.
• [VOL --] button
BEEP turns off.
• [ REPEAT SOUND] button
Initialized. (Turns to the factory preset state, time, volume setting
and so on.)
The music data, files and so on in the memory are not changed.
•
6
NW-E99
SECTION 3
DISASSEMBLY
Note:
Follow the disassembly procedure in the numerical order given.
Note:
Disassemble the unit in the order as shown below.
3-1. CASE, CHASSIS (FRONT) ASSY
SET
3-1. CASE,CHASSIS (FRONT) ASSY
(Page 6)
3-2. DISPLAY BOARD ASSY
(Page 7)
3-3. MAIN BOARD ASSY
(Page 7)
1
case
3
chassis (front)
4
three button (cup)
5
window (led)
2
three claws
7
NW-E99
3-2. DISPLAY BOARD ASSY
3-3. MAIN BOARD ASSY
4
DISPLAY board assy
2
tapping screw (1.7)
3
cover section
1
lid (usb) (sub assy)
4
MAIN board assy
3
chassis (rear)
ornament assy
2
two claws
1
tapping screw (B1.7
×
7)