DOWNLOAD Sony NW-E8P Service Manual ↓ Size: 1.57 MB | Pages: 22 in PDF or view online for FREE

Model
NW-E8P
Pages
22
Size
1.57 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
nw-e8p.pdf
Date

Sony NW-E8P Service Manual ▷ View online

4
NW-E8P
8
Transferring songs from the computer to
Network Walkman (Check-out)
In order to check out digital audio files from your computer, first you must install the supplied
OpenMG Jukebox software and then import digital audio files to OpenMG Jukebox.
For details, refer to the OpenMG Jukebox operating Instructions.
1
Connect Network Walkman to your computer
Connect the narrow connector of the supplied dedicated USB cable into the dedicated USB jack on
Network Walkman, then the wide connector to the USB jack of your computer.
“CONNECT” appears in the display.
Notes
• Do not connect more than two USB devices (player) to your computer. Normal operation will not be
guaranteed.
• If you use this player with a USB hub or a USB extension cable normal operation is not guaranteed.
• A malfunction may occur depending on the USB devices connected at any one time.
• Be sure to insert a fresh Alkaline battery into the unit. If the battery is not inserted, or battery power is
exhausted, the unit will not be identified by the computer.
• When connecting Network Walkman to your computer for the first time, the USB driver Installer window
appears. Please follow the instructions in the Installer window.
• Connect Network Walkman only as necessary. Disconnect the dedicated USB cable when not needed.
2
Transfer the music file to Network Walkman (Check-out)
For details on how to operate, refer to the OpenMG Jukebox Operating Instructions.
Tip
To transfer the song back to the computer (check-in), refer to the OpenMG Jukebox software instruction manual
or the online help.
Basic Operations
Dedicated USB cable (supplied)
to the USB jack
to the dedicated
USB jack
9
Basic Operations
Listening to music with Network
Walkman
Please insert the battery before use (see page 7).
Note
When using Network Walkman, be sure to disconnect it from the computer.
   Putting the player on your ears
continued
Notes
• Please remove earrings.
• If you wear the glasses, remove your glasses before
putting on this player and put them on again.
• Be sure not to open the attaching part more than
2 cm. Otherwise, this player may deform and
might not sit on your ears comfortably. Note that
if you press the player to opposite side, it also
may deform.
1
Pinch the center of
the player with your
thumb and middle
finger, and then open
the attaching part
with your forefinger.
2
Hook the cured part
around the back of your
ear and twist it to the
earlobe direction to sit it
on your ear. If your hair
hangs over your ear,
please push back your
hair before attaching it.
3
Adjust the position of
the player to fix it
comfortably.
If you cannot attach the player to your ear comfortably
Confirm the position of the player with a mirror. In the correct position, your ears should appear as
illustrated. if your ears are small and not visible as shown, use the supplied attachments (see page 15).
To remove the player from your ears
Twist the player to the opposite direction when attaching it, and remove it.
The attaching
part of this player
would be open
(be apart)
flexibly.
Hook the
edge of the
attaching part
to the back of
your ear and
twist it.
k
k
2cm
10
Listening to music with Network Walkman (continued)
2
    Release the HOLD function
If the HOLD switch is in the arrow direction ( the yellow mark is
visible), slide it to the opposite direction to release the HOLD function.
3
    Start playback
If playback does not start
Make sure the HOLD function is released.
To stop playback
Press the Jog lever Bx.
Tip
If you do not operate the player for 3 seconds while in stop mode, the display automatically turns off.
1
Press the Jog lever
Bx
. Playback starts.
When playback ends,
the playback
automatically stops
(in the case the player
is set to REPEAT OFF).
2
 VOLUME
+/– button to adjust
the volume.
HOLD switch
H
O
L
D
FF
11
Basic Operations
On other operations
To
Go to the beginning
of the next track
Go to the beginning
of succeeding
tracks 
1)
Go to the beginning
of the current track
Go to previous
tracks  
1)
Go forward 
2)
Go backward 
2)
Operation of
the Jog lever
Press in the FF direction
once.
Press in the FF direction
repeatedly.
Press in the REW direction
once.
Press in the REW direction
repeatedly.
During playback, press in
the FF direction and hold .
During playback, press in
the REW direction and
hold.
FF direction
Jog lever
REW direction
1)
While in stop mode, press the Jog lever in the FF
direction and hold, you can go to the beginning of
the next track and succeeding tracks continuously.
While in stop mode press the Jog lever in the REW
direction and hold, you can go to the beginning of
the current track and previous tracks continuously.
2)
If you press and hold in the FF or REW direction
for more than 5 seconds, the search speed
increases.
continued
5
NW-E8P
12
Play status
During playback: 
 or 
 is
displayed alternately.
In stop mode: 
 is displayed.
While locating tracks: > or
.
 is displayed.
While searching a point in a track:
M
 or m is displayed.
When you play back songs for
more than 15 seconds, a wave
pattern is displayed.
Track
number
4
3
2
1
5
Changing the display mode
Press the DISPLAY button while the wave is
displayed during playback and the track
number is displayed.
About the backlight
If you perform the following operation, the
backlight lights up for a few seconds.
• Press the buttons (VOLUME+/--, DISPLAY,
P.MODE, MEGABASS/AVLS)
• Operate the Jog lever
Note
In a bright place, the backlight may not be
apparent.
m
DISPLAY
button
Track
number
Volume
indication
(Displayed
numerically.
Max. volume is
31)
Play status
Play status
Listening to music with Network Walkman (continued)
On the display
1 AVLS indication (page 13)
The indication lights up while the AVLS
function is activated.
2 MEGA BASS indication (page 13)
The indication lights up while the MEGA
BASS function is activated.
3 Battery remain indication (page 7)
The remaining battery power is
displayed.
4 Play mode indication (page 14)
The selected play mode is displayed.
5
Play status/Track number display
The following information is displayed
according to the display mode.
15
Advanced Operations
Attaching the attachments
If your ears are small and you cannot attach the player correctly, use the supplied attachments.
Example for left ear
L
R
2
Lift its edge and turn it in the
direction of the arrow to remove it.
1
Pull the edge of the attachment in
the direction of the arrow.
To remove the attachment
3
 Press the point shown by the arrow to
secure it.
2
 Turn the attachment to click into place.
Engage the pin in the slot as shown, and
insert the attachment.
1
pin
For left ear
For right ear
6
NW-E8P
SECTION 3
DISASSEMBLY
Note :
 Follow the disassembly procedure in the numerical order given.
<R-CH section>
3-1. DRIVER ASSY (SP2), ARM LID (R), HOLDER LID (R)
<R-CH section>
3-2. MAIN BOARD, POWER BOARD, LCD UNIT
z
 The equipment can be removed using the following procedure.
Driver ASSY (SP2), Arm lid (R), Holder lid (R)
<R-CH section>
<L-CH section>
Main board, Power board, LCD unit
Set
Driver ASSY (SP1), Arm lid (L), Holder lid (L)
8
6
3
1
LCD unit
Holder (R) ASSY
Arm lid (R)
4
 Remove solder
(2 places)
2
 Turn to clockwise 
to release lock.
Red
Black
Black
7
 Screw B1.7x5
5
 Screws 
B1.7x5
7
 Screw 
B1.7x5
Front plate
Red
Ear pad
Driver ASSY (SP2)
Driver ASSY
Marking (red)
Red
Glue
Black
• Connection of driver ASSY
Arm lid (R) (rear side)
• Installation of holder lid (R) 
and arm lid (R)
Claw
Holder lid (R) (rear side)
Holder lid (R)
5
3
1
Holder (R) ASSY
2
 LCD flexible board
(Power board: CN705)
Power board
LCD unit
Knob (HOLD)
Cord (4 core)
4
 Remove solder
(4 places)
Red
Red/clear (rear side)
Green/clear
Green
CN704
CN702
Main board
HOLD switch
(S704)
z
 Caution during assembly
Align HOLD switch (S704) with 
the position of knob (HOLD).
7
NW-E8P
<L-CH section>
3-3. DRIVER ASSY (SP1), ARM LID (L), HOLDER LID (L)
9
6
3
1
Driver ASSY
Ear pad
Marking 
(red)
Red
Glue
Black
• Connection of driver ASSY
Red
Black
Black
Green
Red
Red
Red/clear
Green/clear
Cord (4 core)
• Wiring of cord (4 core)
Arm lid (L)
Front plate
2
 Turn to clockwise 
to release lock.
5
 Screws 
B1.7x5
8
 Screw 
B1.7x5
8
 Screws B1.7x5
7
 Open the battery lid.
Driver ASSY (SP1)
Holder lid (L)
Holder (L) ASSY
MDD flexible board
4
 Remove solder
(2 places)
Note:
When soldering, 
paying attention as 
holder (L) doesn’t 
transform it by a heat.
• Installation of holder lid (L) 
and arm lid (L)
Claw
Holder lid (L)
Lid (L), arm
(rear side)
Page of 22
Display

Sony NW-E8P Service Manual ▷ Download

  • DOWNLOAD Sony NW-E8P Service Manual ↓ Size: 1.57 MB | Pages: 22 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony NW-E8P in PDF for free, which will help you to disassemble, recover, fix and repair Sony NW-E8P Audio. Information contained in Sony NW-E8P Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.