Sony NW-E5 Service Manual ▷ View online
5
NW-E5
6
NW-E5
7
NW-E5
SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
3-1. CHASSIS ASSY, CASE ASSY
3-2. LID, CASE
r
The equipment can be removed using the following procedure.
2
Screw B1.7x4
3
1
Chassis ASSY
Lid, case
Chassis ASSY
Set
Lid, Case
Case ASSY
LCD unit
Knob (PLAY/STOP), holder (knob, spring), knob (FF/REW)
Main board, Power board
1
Screw M1.4
5
Plate, lock
2
Screw (1.7x2.5)
6
LCD flexible board
4
Pull out Chassis
ASSY halfway.
Case ASSY
Case ASSY
Chassis ASSY
Chassis ASSY
Knob (FF/REW)
Knob (FF/REW)
3
7
Lid, connector
5
6
4
Chassis (lower)
Chassis (upper)
CN704
CN702
Power board
Main board
1
Mode switch flexible board
(Peel from Chassis (upper))
3
Claws
2
Claw
3-3. MAIN BOARD, POWER BOARD
NOTE ON ATTACHING
On attaching Chassis ASSY, insert it straightly
without strength not to touch Knob (FF/REW).
With strength, sometimes Holder (knob,
spring) in Case ASSY is damaged.
On attaching Chassis ASSY, insert it straightly
without strength not to touch Knob (FF/REW).
With strength, sometimes Holder (knob,
spring) in Case ASSY is damaged.
8
NW-E5
3-5. BUTTON (PLAY/STOP), HOLDER (KNOB, SPRING), KNOB (FF/REW)
3-4. LCD UNIT
4
LCD flexible board
(Peel from “chassis, LCD”)
(Peel from “chassis, LCD”)
3
Pull out LCD chassis with tilting.
Chassis, LCD
Knob (HOLD)
Knob (FF/REW)
Case ASSY
Case ASSY
Chassis, LCD
Projection
5
Claws
LCD unit
HOLD switch (S800)
1
2
6
4
Knob (FF/REW)
Case ASSY
Knob (FF/REW)
1
Button (PLAY/STOP)
Put Gummed tape on surface, and pull it off.
2
Press Holder (knob, spring) down with
picking its claws up both sides with tweezers.
Gummed tape
3
Holder (knob, spring)
Tweezers
Holder (knob, spring)
NOTE ON ATTACHING
• On attaching LCD unit to Case ASSY, in
• On attaching LCD unit to Case ASSY, in
case of pressing Knob (FF/REW), it is hard
to attach it.
to attach it.
• Combine HOLD switch (S800) with Knob
(HOLD).
• Combine the projection on LCD chassis
with Case ASSY.
NOTE ON ATTACHING
1. Insert Holder (knob, spring) from
1. Insert Holder (knob, spring) from
the bottom side of Case ASSY
with tweezers.
with tweezers.
2. Attach Knob (FF/REW) in with
pressing Holder (knob, spring).
3. Attach Button (PLAY/STOP) with
setting
B
x
marked position.
Click on the first or last page to see other NW-E5 service manuals if exist.