DOWNLOAD Sony MHC-NX300AV / STR-NX300 Service Manual ↓ Size: 2.96 MB | Pages: 14 in PDF or view online for FREE

MICROFILM

The following measured at AC 120/220/240 V,
50/60 Hz
Front Speaker:
DIN power output (rated) 95 + 95 watts

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

120 + 120 watts
(6 ohms at 1 kHz,
10% THD)

Centre Speaker:
DIN power output (rated) 25 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

35 watts
(8 ohms at 1 kHz,
10% THD)

Rear Speaker:
DIN power output (rated) 25 + 25 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

35 + 35 watts
(8 ohms at 1 kHz,
10% THD)

Inputs
VIDEO IN:

voltage 250 mV,

(phono jacks)

impedance 47 kilohms

MD IN:

voltage 450 mV,

(phono jacks)

impedance 47 kilohms

DVD INPUT:

FRONT IN:

voltage 450 mV,

(phono jacks)

impedance 47 kilohms

REAR IN:

voltage 450 mV,

(phono jacks)

impedance 47 kilohms

CENTER IN:

voltage 450 mV,

(phono jacks)

impedance 47 kilohms

WOOFER IN:

voltage 450 mV,

(phono jacks)

impedance 47 kilohms

MIC1/2:

sensitivity 1 mV,

(mini jack)

impedance 10 kilohms

Outputs
MD OUT:

voltage 250 mV

(phono jacks)

impedance 1 kilohms

VIDEO OUT:

max. output level 1 Vp-p,

(phono jack)

unbalanced,
Sync negative,
load impedance 75 ohms

S-VIDEO OUT:

Y: 1 Vp-p, unbalanced,

(4-pin/mini-DIN jack)

Sync negative,
C: 0.286 Vp-p,
load impedance 75 ohms

PHONES:

accepts headphones of 8

(stereo mini jack)

ohms or more

FRONT SPEAKER:

accepts impedance of 6 to
16 ohms

REAR SPEAKER:

accepts impedance of 8 to
16 ohms

CENTER SPEAKER:

accepts impedance of 8 to
16 ohms

SUPER WOOFER:

Voltage 1 V, impedance
1 kilohms

FM stereo, FM/AM superheterodyne tuner

Tuning range                       87.5 – 108.0 MHz
Aerial

FM lead aerial

Aerial terminals

75 ohm unbalanced

Intermediate frequency

10.7 MHz

Tuning range
2 Band type:

531 – 1,602 kHz
(with the interval set at
9 kHz)
530 – 1,710 kHz
(with the interval set at
10 kHz)

3 Band type:
MW:

531 – 1,602 kHz
(with the interval set at
9 kHz)
530 – 1,710 kHz
(with the interval set at
10 kHz)

SW:

5.95 – 17.90 MHz
(with the interval set at
5 kHz)

Aerial

AM loop aerial

Aerial terminals

External aerial terminal

Intermediate frequency

450 kHz

E Model

Chinese Model

• STR-NX300 is the Tuner and Amplifier section in MHC-NX300AV.
• STR-NX300 is almost the same as STR-NX3 Singapore model.

The difference portion and the difference parts from STR-NX3 Singapore model are de-
scribed in this service manual.
Please refer to STR-NX1/NX3 service manual (9-928-980-

S

) previously issued for other

information.

– Continued on next page –

2

PART No.

0

0

MODEL

PART No.

Malaysia, Singapore and Hong Kong models

4-221-391-5[]

Thai and Chinese models

4-221-391-7[]

Power requirements
Thai and Chinese models: 220 V AC, 50/60 Hz
Other models:

120 V, 220 V or
230 – 240 V AC, 50/60 Hz
Adjustable with voltage
selector

Power consumption

300 watts

Dimensions (w/h/d)

Approx. 225 x 202 x 356
mm

Mass

Approx. 8.1 kg

Design and specifications are subject to change
without notice.

3

1 DISPLAY button

2 ?/1 button and indicator

3 POWER SAVE/DEMO (STANDBY) button

4 – m button

5 + M button

6 FILE SELECT button

7 VIDEO/DVD button

8 EDIT button

9 MD button

0 REPEAT button

qa TAPE button

qs PLAY MODE button

qd CD button

qf DBFB button

qg TUNER button

qh DSP button

qj TUNER BAND button

qk STEREO/MONO button

ql TUNER MEMORY button

w; KARAOKE PON button

wa GROOVE button and indicator

ws ECHO LEVEL knob

wd MIC LEVEL knob

wf MIC 1 jack

wg MIC 2 jack

wh PHONES jack

wj Remote sensor

wk Jog dial

wl ENTER button and indicator

e; DVD 5.1CH button and indicator

ea PRO LOGIC button and indicator

es VOLUME knob

1 AM ANTENNA terminals

2 FM ANTENNA terminal

3 SYSTEM CONTROL connector

4 VIDEO (AUDIO) IN jacks

5 MD IN jacks

6 MD OUT jacks

7 DVD 5.1CH INPUT jacks

8 SUPER WOOFER OUT jack

9 VOLTAGE SELECTOR switch

(Malaysia, Singapore and Hong Kong models)

q; FRONT SPEAKER terminals

qa REAR SPEAKER terminals

qs CENTER SPEAKER terminals

M

l

m

>

1

2

3

4

5

wh wj

wk wl

e; ea

6

0

8

qs qf

qh

7 9 qa qd qg

qk

ql

wa

w;

ws

wd

wf

wg

es

qj

3

4

5

6

7

8

3

4

5

6

7

8

0

qa qs

0

qa qs

9

9

2

1 2

1

4

Press CLOCK/TIMER.

The hour indication flashes.

Press V or v repeatedly to set the
hour.

Press ENTER.

The minute indication flashes.

Press V or v repeatedly to set the
minute.

Press ENTER.

The clock starts working.

• If you make a mistake, start over from step 1.
• Setting the time deactivates the demo mode.

If you want to display the demo mode, press
DEMO (STANDBY) when the power is off.

The previous explanation shows how to set
the time while the power is off. To change the
time while the power is on, do the following:

1 Press CLOCK/TIMER.
2 Press V or v repeatedly to select the SET

CLOCK.

3 Press ENTER.
4 Perform steps 2 through 5 above.

The clock settings are cancelled when you
disconnect the mains lead or if a power failure
occurs.

You must set the time before using the timer
functions.

V

v

b

B