Sony MHC-GN1000D / SS-CT1000D / SS-CT999D / SS-GN1000D / SS-GN1000S / SS-GN999D / SS-GN999S / SS-RSX1000D / SS-RSX999D / SS-WGV1000D / SS-WGV999D Service Manual ▷ View online
SS-CT999D/CT1000D/GN999D/GN999S/GN1000D/
GN1000S/RSX999D/RSX1000D/WGV999D/WGV1000D
E Model
SERVICE MANUAL
CENTER SPEAKER/FRONT SPEAKERS/
SURROUND SPEAKERS/SUB WOOFER
SURROUND SPEAKERS/SUB WOOFER
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
Published by Sony Techno Create Corporation
9-887-255-01
2006E02-1
© 2006.05
© 2006.05
Ver. 1.0 2006. 05
Photo : SS-RSX999D
Photo : SS-GN999D
Photo : SS-RSX1000D
Photo : SS-WGV999D
Photo : SS-WGV1000D
COMPONENT MODEL NAME
MHC-GN999D
E2, E51, MX
SS-GN999D
SURROUND SPEAKERS
SS-RSX999D
CENTER SPEAKER
SS-CT999D
E2
FRONT SPEAKERS
SS-GN1000D
SS-GN1000S
SURROUND SPEAKERS
SS-RSX1000D
SS-RSX1000D
CENTER SPEAKER
SUB WOOFER
DVD PLAYER DECK
RECEIVER SYSTEM
RECEIVER SYSTEM
FRONT SPEAKERS
SUB WOOFER
SS-GN999S
System name
DVD PLAYER DECK RECEIVER
SS-WGV999D
HCD-GN999D
SS-CT1000D
SS-WGV1000D
MHC-GN999DS
HCD-GN1000D
EXCEPT E2
Destination
EXCEPT E2, E51, MX
HCR-GN1000D
SS-GN1000DP
SS-GN1000SP
Destination
MHC-GN1000D
System name
•
JIG
When disassembling the set, use the following jig (for
speaker removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
When disassembling the set, use the following jig (for
speaker removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
• Abbreviation
E2
: 120 V AC Area in E model
E51
: Chilean and Peruvian model
MX
: Mexican model
2
SS-CT999D/CT1000D/GN999D/GN999S/GN1000D/GN1000S/RSX999D/RSX1000D/WGV999D/WGV1000D
SPECIFICATIONS
For MHC-GN999D/MHC-GN999DS
• Front speaker (SS-GN999D/SS-GN999S)
Speaker system
2-way, 2-unit, bass-reflex type,
magnetically shielded
magnetically shielded
Speaker units
Woofer:
Woofer:
20 cm, cone type
Tweeter:
2.5 cm, horn type
Nominal impedance
6 ohms
Dimensions (w/h/d)
Approx. 281 x 417 x 310.5 mm
Mass
Approx. 7.2 kg net per speaker
• Surround speaker (SS-RSX999D)
Speaker system
Full range, 2-unit, bass-reflex
type
type
Speaker units
Full range:
Full range:
8 cm, cone type x 2
Nominal impedance
16 ohms
Dimensions (w/h/d)
Approx. 268 x 107 x 117 mm
Mass
Approx. 1.4 kg net per speaker
• Center speaker (SS-CT999D)
Speaker system
Full range, 2-unit, bass-reflex
type, magnetically shielded
type, magnetically shielded
Speaker units
Full range:
Full range:
8 cm, cone type x 2
Nominal impedance
16 ohms
Dimensions (w/h/d)
Approx. 268 x 107 x 117 mm
Mass
Approx. 1.6 kg
• Sub woofer (SS-WGV999D)
Speaker system
1-way, 1-unit, bass-reflex type,
magnetically shielded
magnetically shielded
Speaker units
Woofer:
Woofer:
20 cm, cone type
Nominal Impedance
6 ohms
Dimensions (w/h/d)
Approx. 262 x 327 x 370 mm
Mass
Approx. 6.6 kg
For MHC-GN1000D
• Front speaker (SS-GN1000D (Latin American models only)/
SS-GN1000S (Other models))
Speaker system
2-way, 2-unit, bass-reflex type,
magnetically shielded
magnetically shielded
Speaker units
Woofer:
Woofer:
20 cm, cone type
Tweeter:
2.5 cm, horn type
Nominal impedance
6 ohms
Dimensions (w/h/d)
Approx. 281 x 417 x 310.5 mm
Mass
Approx. 7.2 kg net per speaker
• Surround speaker (SS-RSX1000D)
Speaker system
2-way, 2-units, bass-reflex type
Speaker units
Woofer:
Woofer:
10 cm, cone type
Tweeter:
5 cm, horn type
Nominal impedance
6 ohms
Dimensions (w/h/d)
Approx. 176 x 362 x 215 mm
Mass
Approx. 2.9 kg net per speaker
• Center Speaker (SS-CT1000D)
Speaker system
Full range, 2-unit,
bass-reflex type,
magnetically shielded
bass-reflex type,
magnetically shielded
Speaker units
Full range:
Full range:
8 cm, cone type x 2
Nominal Impedance
6 ohms
Dimensions (w/h/d)
Approx. 268 x 107 x 117 mm
Mass
Approx. 1.6 kg
• Subwoofer (SS-WGV1000D)
Subwoofer system
1-way, 1-unit, bass-reflex type,
magnetically shielded
magnetically shielded
Speaker units
Subwoofer:
Subwoofer:
20 cm, cone type
Nominal impedance
8 ohms
Dimensions (w/h/d)
Approx. 281
×
362
×
338.5 mm
Mass
Approx. 6.8 kg
Design and specifications are subject to change without notice.
3
SS-CT999D/CT1000D/GN999D/GN999S/GN1000D/GN1000S/RSX999D/RSX1000D/WGV999D/WGV1000D
Q1400
R1405
R1406
JR1400
D1400
S1400
C1400
CN1400
HCD-GN1000D
1
4
E
SUBWOOFER
ON/OFF
SUBWOOFER
LEVEL
BOARD
SWPANEL
11
(11)
1-868-600-
JR1402
C1401
R1401
R1402
R1403
R1404
R1402
R1403
R1404
SW1400
2
3
A
1
B
C
D
1-1. PRINTED WIRING BOARD (SS-WGV1000D)
SECTION 1
DIAGRAMS
Note on Printed Wiring Boards:
•
•
X
: parts extracted from the component side.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
• Indication of transistor.
B
These are omitted.
C
E
Q
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
: Uses unleaded solder.
4
SS-CT999D/CT1000D/GN999D/GN999S/GN1000D/GN1000S/RSX999D/RSX1000D/WGV999D/WGV1000D
1-2. SCHEMATIC DIAGRAM (SS-WGV1000D)
Note on Schematic Diagram:
• All capacitors are in
• All capacitors are in
µ
F unless otherwise noted. (p: pF) 50 WV or
less are not indicated except for electrolytics and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise specified.
•
C
: panel designation.
•
A
: B+ Line.
• Voltages are dc with respect to ground in service mode.
no mark : POWER ON
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal production toler-
ances.
ances.
JR1400
C1400
R1406
R1405
R1401
R1402
R1403
R1404
JR1402
C1401
1
50V
D1400
Q1400
S1400
SW1400
CN1400
0
10
50V
1k
1k
2.2k
6.8k
22k
68k
0
SELU5420E
GREEN
2SC2712
LED DRIVE
4P
SUBWOOFER
SUBWOOFER
ON/OFF
SUBWOOFER
ON/OFF
LEVEL
HCD-GN1000D