DOWNLOAD Sony ICF-CD555TV Service Manual ↓ Size: 4.05 MB | Pages: 74 in PDF or view online for FREE

Model
ICF-CD555TV
Pages
74
Size
4.05 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
icf-cd555tv.pdf
Date

Sony ICF-CD555TV Service Manual ▷ View online

SERVICE MANUAL
US Model
Canadian Model
SPECIFICATIONS
ICF-CD555TV
Ver. 1.3  2005.10
9-877-644-04
Sony Corporation
2005J05-1
Personal Audio Group
© 2005.10
Published by Sony Engineering Corporation
LCD-TV CD KITCHEN CLOCK RADIO
Model Name Using Similar Mechanism
ZS-D10
Optical Pick-up Block Name
KSM-900AAA
Optical Pick-up Name
KSS-900A
AUDIO POWER
SPECIFICATIONS
(US model only)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 6–ohm loads, both channels driven from 100 –
10,000 Hz; rated 1.4 W per channel-minimum RMS
power, with no more than 10 % total harmonic
distortion in AC operation.
TV section
Television system: 
American TV standard/NTSC
Channel coverage:
VHF: 2–13/UHF: 14–69/CATV: 1–125
Antenna:
75-ohm external antenna terminal for VHF/UHF
Display type: 
Wide LCD color monitor
Size:
7 inches
System:
TFT active matrix
Number of pixel: 
336,960 pixels
Input:
1 video, 1 audio
CD player section
System: 
Compact disc digital audio system
Laser diode properties:  
Material: GaAlAs
Wavelength: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 
µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Frequency response: 
20 – 20,000 Hz 
 dB
Wow and flutter: 
Below measurable limit
Radio section
Frequency range:
FM: 87.5 – 108 MHz
AM: 530 – 1,710 kHz
General
Time display: 
12-hour system
Speaker:
77 mm (3 
1
8
 inches) dia, 6 
Ω 
Power outputs:
1.8 W + 1.8 W (at 10% harmonic distortion)
Power requirements: 
120 V AC, 60 Hz
Dimensions:
Approx. 400 
× 104 × 323 mm (w/h/d)
(Approx. 15 
3
4
× 4 
1
8
× 12 
3
4
 inches) incl.
projecting parts and controls
Mass:
Approx. 4.2 kg (9 lb 4.2 oz)
Supplied accessories:
Mounting screws (4), Template (1),
Spacers (4), Remote commander (1)
Design and specifications are subject to change
without notice.
2
ICF-CD555TV
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous ra-
diation exposure.
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
0
  OR  DOTTED
LINE  WITH  MARK  
0
  ON  THE  SCHEMATIC  DIAGRAMS
AND  IN  THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE
OPERATION.  REPLACE  THESE  COMPONENTS  WITH
SONY  PARTS  WHOSE  PART  NUMBERS  APPEAR  AS
SHOWN  IN  THIS  MANUAL  OR  IN  SUPPLEMENTS  PUB-
LISHED  BY  SONY.
Notes on chip component replacement
Never reuse a disconnected chip component.
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
Flexible Circuit Board Repairing
Keep the temperature of the soldering iron around 270 
°
C dur-
ing repairing.
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE  TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indica-
tion is 0.75 V, so analog meters must have an accurate low-
voltage scale. The Simpson 250 and Sanwa SH-63Trd are ex-
amples of a passive VOM that is suitable. Nearly all battery
operated digital multimeters that have a 2 V AC range are suit-
able.  (See Fig. A)
Fig. A.
Using an AC voltmeter to check AC leakage.
1.5 k
0.15 
µ
F
AC
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Earth Ground
About CD-Rs/CD-RWs
This unit is compatible with CD-Rs/CD-RWs but
playback capability may vary depending on the
quality of the disc, the recording device and
application software.
ATTENTION  AU  COMPOSANT  AYANT  RAPPORT
À  LA  SÉCURITÉ!
LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  
0
  SUR
LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE  DES
PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ  DE
FONCTIONNEMENT.  NE  REMPLACER  CES  COM-  POSANTS
QUE  PAR  DES  PIÈCES  SONY  DONT  LES  NUMÉROS  SONT
DONNÉS  DANS  CE  MANUEL  OU  DANS  LES  SUPPLÉMENTS
PUBLIÉS  PAR  SONY.
Ver. 1.1
3
ICF-CD555TV
TABLE  OF  CONTENTS
1.
SERVICING  NOTES
..............................................
3
2.
GENERAL
..................................................................
4
3.
DISASSEMBLY
3-1. Disassembly Flow ...........................................................
5
3-2. CD Lid, Cabinet (Upper) ................................................
5
3-3. CD Tray Assy ..................................................................
6
3-4. CD Tray (Lower) .............................................................
6
3-5. Optical Pick-up Block (KSM-900AAA) ........................
7
3-6. Optical Pick-up (KSS-900A) ..........................................
7
3-7. DSP Case (Rear) .............................................................
8
3-8. TV Board .........................................................................
8
3-9. LCD Unit (LCD1) ...........................................................
9
3-10. The Cable Processing Method which Connects
a MAIN Board and TV Board ........................................
9
4.
TEST  MODE
............................................................. 10
5.
ELECTRICAL  ADJUSTMENTS
Tuner Section ................................................................. 13
CD Section .....................................................................  15
Monitor Section ..............................................................  16
6.
DIAGRAMS
6-1. Block Diagram  – CD Section – .................................... 21
6-2. Block Diagram  – TUNER Section – ............................ 22
6-3. Block Diagram  – MONITOR Section – ....................... 23
6-4. Block Diagram  – MAIN Section – ............................... 24
6-5. Note for Printed Wiring Boards and
Schematic Diagrams ....................................................... 25
6-6. Printed Wiring Boards  – CD Section – ........................ 26
6-7. Schematic Diagram  – CD Section – ............................. 27
6-8. Printed Wiring Board  – TUNER Section – .................. 28
6-9. Schematic Diagram  – TUNER Section – ..................... 29
6-10. Printed Wiring Boards  – MAIN Section – ................... 30
6-11. Printed Wiring Boards  – PANEL Section – ................. 31
6-12. Schematic Diagram  – MAIN Section (1/3) – ............... 32
6-13. Schematic Diagram  – MAIN Section (2/3) – ............... 33
6-14. Schematic Diagram  – MAIN Section (3/3) – ............... 34
6-15. Schematic Diagram  – MONITOR Section (1/3) – ....... 35
6-16. Schematic Diagram  – MONITOR Section (2/3) – ....... 36
6-17. Schematic Diagram  – MONITOR Section (3/3) – ....... 37
6-18. Printed Wiring Board
– MONITOR Section (Component Side) – ................... 38
6-19. Printed Wiring Board
– MONITOR Section (Conductor Side) – ..................... 39
6-20. Printed Wiring Boards
– AMP/POWER SUPPLY Section – ............................. 40
6-21. Schematic Diagram
– AMP/POWER SUPPLY Section – ............................. 41
7.
EXPLODED  VIEWS
7-1. Cabinet (Upper) Section ................................................. 53
7-2. Cabinet (Front) Section ................................................... 54
7-3. Cabinet (Lower) Section-1 .............................................. 55
7-4. Cabinet (Lower) Section-2 .............................................. 56
7-5. TV Assy Section .............................................................. 57
7-6. MAIN Board Section ...................................................... 58
7-7. CD Tray Assy Section ..................................................... 59
7-8. Optical Pick-up Section (KSM-900AAA) ..................... 60
8.
ELECTRICAL  PARTS  LIST
.............................. 61
SECTION  1
SERVICING  NOTES
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES  ON  LASER  DIODE  EMISSION  CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
NOTES  ON  HANDLING  THE  OPTICAL  PICK-UP
BLOCK  OR  BASE  UNIT
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges oc-
cur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
4
ICF-CD555TV
SECTION  2
GENERAL
This section is extracted from
instruction manual.
B
C
Size AAA
(R03 )
× 2
The number 5 and the VOL +
buttons have a tactile dot.
The preset 3, CLOCK, VOLUME + and CD 
u buttons have a tactile dot.
Push
Turn
TIMER indicator
AC power cord
Features
¥ Super Slim under the counter LCD-TV
¥ 7" wide-screen LCD Color panel display
¥ TV/Cable Tuner
¥ TV stereo/Auto SAP Function
¥ MEGA Xpand function to get the effect of
expansion of the sound field
¥ Easy Set, One Touch Cooking Timer
¥ Magnetic Remote Commander
Basic Connections
(Connecting Cable
TV or Antenna)
Connecting directly to cable or an antenna
Connecting a VCR
and TV
Use this hookup if you subscribe to a cable TV
System that does not require a cable box.
Setting the Clock
1
Plug in the kitchen clock radio.
The display will flash  AM 12:00 .
2
Press CLOCK for a few seconds.
You will hear a beep and the hour will start to
flash in the display.
3
Press TIME SET + or  until the correct
hour appears in the display.
4
Press CLOCK once.
The minutes will flash.
5
Repeat steps  and  to set the minutes.
After setting the minutes, press CLOCK to start
the counting of the seconds, and you will hear two
short beeps.
To set the current time quickly, hold down TIME
SET + 
or .
12-hour system:  AM 12:00  = midnight
In step 5, when you press CLOCK after the minute
setting to activate the clock, the seconds  start
counting from zero.
Page of 74
Display

Sony ICF-CD555TV Service Manual ▷ Download

  • DOWNLOAD Sony ICF-CD555TV Service Manual ↓ Size: 4.05 MB | Pages: 74 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony ICF-CD555TV in PDF for free, which will help you to disassemble, recover, fix and repair Sony ICF-CD555TV Audio. Information contained in Sony ICF-CD555TV Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.