Sony ICF-CD543RM Service Manual ▷ View online
4
ICF-CD543RM
OFF
LOW
MEGA BASS
HIGH
PLAY MODE
1
2
3
4
5
PRESET TUNING
SELECT
PRESET
VOLUME
TUNE/TRACK
TIME SET
RADIO
CD
OFF
ON/BAND
CLOCK
D.S.T.
SUMMER T.
PUSH START/STOP
TIMER
OPEN/CLOSE
AC power cord
Cord clamp
The preset 3, VOLUME + and
CD u buttons have a tactile dot.
CD u buttons have a tactile dot.
Push
Turn
TIMER
TIMER
indicator
indicator
Features
• Built-in CD player with CD-R/RW playback
function
• Dynamic Bass Reflex Sound with the MEGA
BASS sound system
• TV/WEATHER/FM/AM 4 band PLL (phase
locked loop) synthesized clock radio (US
model)
model)
• FM/AM 2 band PLL (phase locked loop)
Setting the Clock
(US model)
1
1
Plug in the CD kitchen clock radio.
The display will flash “AM 12:00”.
2
Press CLOCK for a few seconds.
You will hear a beep and the hour will start
to flash in the display.
to flash in the display.
3
Press TUNE/TRACK•TIME SET + or –
until the correct hour appears in the
display.
until the correct hour appears in the
display.
4
Press CLOCK once.
The minute will flash.
5
Repeat steps 3 and 4 to set the minute.
After setting the minute, press CLOCK to start
the counting of the seconds, and you will
hear two short beeps.
the counting of the seconds, and you will
hear two short beeps.
To set the current time rapidly, hold down
TUNE/TRACK•TIME SET + or –.
The clock system varies depending on the model
you own.
12-hour system: “AM 12:00” = midnight
TUNE/TRACK•TIME SET + or –.
The clock system varies depending on the model
you own.
12-hour system: “AM 12:00” = midnight
In step 5, when you press CLOCK after the
minute setting to activate the clock, the seconds
start counting from zero.
minute setting to activate the clock, the seconds
start counting from zero.
To change the display to the daylight saving
time (summer time) indication
time (summer time) indication
Press D.S.T.•SUMMER T..
“
“
” is displayed and the time indication
changes to summer time.
To deactivate the summer time function, press
D.S.T.•SUMMER T. again.
To deactivate the summer time function, press
D.S.T.•SUMMER T. again.
(Canadian, AEP models)
• Easy Preset Digital Tuning with 25 station presets
• Easy to set dial cooking timer
• Remote Commander Included
• D.S.T. (Daylight Saving Time) – Summer time
• Easy to set dial cooking timer
• Remote Commander Included
• D.S.T. (Daylight Saving Time) – Summer time
calculation
(Canadian, AEP model)
1
1
Plug in the CD kitchen clock radio.
The display will flash “AM 12:00” or “0:00”.
2
Press CLOCK for a few seconds.
You will hear a beep and the hour will start
to flash in the display.
to flash in the display.
3
Press TUNE/TRACK•TIME SET + or –
until the correct hour appears in the
display.
until the correct hour appears in the
display.
4
Press CLOCK once.
The minute will flash.
5
Repeat steps 3 and 4 to set the minute.
After setting the minute, press CLOCK to start
the counting of the seconds, and you will
hear two short beeps.
the counting of the seconds, and you will
hear two short beeps.
To set the current time rapidly, hold down
TUNE/TRACK•TIME SET + or –.
The clock system varies depending on the model
you own.
12-hour system: “AM 12:00” = midnight
24-hour system: “0:00” = midnight
TUNE/TRACK•TIME SET + or –.
The clock system varies depending on the model
you own.
12-hour system: “AM 12:00” = midnight
24-hour system: “0:00” = midnight
In step 5, when you press CLOCK after the
minute setting to activate the clock, the seconds
start counting from zero.
minute setting to activate the clock, the seconds
start counting from zero.
To change the display to the
daylight saving time (summer time) indication
daylight saving time (summer time) indication
Press D.S.T.•SUMMER T..
“
“
” is displayed and the time indication
changes to summer time.
To deactivate the summer time function, press
D.S.T.•SUMMER T. again.
To deactivate the summer time function, press
D.S.T.•SUMMER T. again.
Magnet
Size AAA (R03) x 2
The VOL + and u buttons have a
tactile dot.
tactile dot.
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
ICF-CD543RM
5
SET
3-2. CABINET (UPPER), CD LID
(Page 6)
3-3. CD BLOCK SECTION
(Page 6)
3-4. PANEL (FRONT) SECTION
(Page 7)
3-5. HOLDER (MD)
(Page 7)
3-6. CD BOARD
(Page 8)
3-7. CHUCK PLATE ASSY
(Page 8)
3-8. TRAY
(Page 9)
3-9. BELT, LOADING BOARD
(Page 9)
3-10. BASE UNIT
(Page 10)
3-11. ARM,
OPTICAL PICK-UP SECTION
(KSM-213CCP OR KSM-213RCP)
(Page 10)
(KSM-213CCP OR KSM-213RCP)
(Page 10)
3-12. OPTICAL PICK-UP
(KSS-213R)
(Page 11)
(Page 11)
Note 1:
The process described in can be performed in any order.
Note 2:
Without completing the process described in , the next process can not be performed.
• This set can be disassembled in the order shown below.
3-1.
DISASSEMBLY FLOW
SECTION 3
DISASSEMBLY
Ver. 1.3
ICF-CD543RM
6
4
six screws
(BTP3
(BTP3
×
14)
4
two screws
(P3
(P3
×
8)
3
CD lid
1
Turn on the power supply, and press the button (open)
to open the tray.
to open the tray.
2
two claws
4
five screws
(BTP3
(BTP3
×
14)
4
three screws
(BTP3
(BTP3
×
14)
4
three screws
(BTP3
(BTP3
×
14)
5
cabinet (upper)
Note: On installation cabinet (upper)
adjust the S691 and
knob (mega bass).
knob (mega bass).
knob (mega bass)
S691
Note:
Follow the disassembly procedure in the numerical order given.
3-2.
CABINET (UPPER), CD LID
3-3.
CD BLOCK SECTION
1
Turn on the power supply,
and press the button (open)
to close the tray.
and press the button (open)
to close the tray.
4
connector
(CN651)
(CN651)
5
CD block section
3
flexible flat cable (14 core)
(CNP702)
(CNP702)
2
ICF-CD543RM
7
3-4.
PANEL (FRONT) SECTION
3-5.
HOLDER (MD)
2
two screws
(P2.6
(P2.6
×
8)
1
parallel wire lead
(CN301)
(CN301)
3
7
screw
(BTP3
(BTP3
×
14)
8
two screws
(P2.6
(P2.6
×
8)
9
claw
0
panel (front) section
9
claw
8
two screws
(P2.6
(P2.6
×
8)
7
screw
(BTP3
(BTP3
×
14)
6
parallel wire lead
(CN1)
(CN1)
5
relay board
4
two parallel wire leads
(CN671, CN672)
(CN671, CN672)
2
holder (MD)
1
two screws
(BTP3
(BTP3
×
14)
1
two screws
(BTP3
(BTP3
×
14)