Sony ICF-C411 Service Manual ▷ View online
5
ICF-C411
• The equipment can be removed using the following procedure.
SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
3-1. CABINET (UPPER) SECTION
Set
Cabinet (Upper) Section
Main Board
Key Board, LED Board
1
screws (P 3x14)
5
cabinet (upper) section
4
CN301
2
screws (P 3x14)
3
screw (P 3x14)
6
ICF-C411
3-2. MAIN BOARD
3-3. KEY BOARD, LED BOARD
9
screws (P 3x10)
0
MAIN board
8
Removal the solder
2
screw (P 3x10)
3
screw (P 3x10)
5
claw
4
claw
6
1
knob (volume)
7
CN1
1
screw (P 3x10)
2
KEY board
4
LED board
5
LED101
3
claw
7
ICF-C411
FM FREQUENCY COVERAGE ADJUSTMENT
Adjust for a maximum reading on level meter.
L3
CT3
86.5 MHz
109.5 MHz
FM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
L2
CT2
86.5 MHz
109.5 MHz
AM IF ADJUSTMENT
Adjust for a maximum reading on level meter.
T1
455 kHz
AM FREQUENCY COVERAGE ADJUSTMENT
Adjust for a maximum reading on level meter.
L4
CT4
515 kHz
1,750 kHz
AM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
L1
CT1
600 kHz
1,400 kHz
FM SECTION 0 dB = 1 µV
Setting:
BAND switch: FM
VOLUME control: MIN
BAND switch: FM
VOLUME control: MIN
AM SECTION
Setting:
BAND switch: AM
VOLUME control: MIN
BAND switch: AM
VOLUME control: MIN
SECTION 4
ELECTRICAL ADJUSTMENTS
FM lead wire
antenna terminal
antenna terminal
0.01
µ
F
FM RF signal
generator
generator
400Hz, 30% FM modulation
frequency deviation
frequency deviation
±
22.5kHz
Output level: as low as possible
set
Put the lead-wire
antenna close to
the set.
antenna close to
the set.
AM RF signal
generator
generator
400Hz, 30%
AM modulation
Output level: as low as possible
AM modulation
Output level: as low as possible
• Connecting Level Meter (FM and AM)
Repeat the procedures in each adjustment several times, and the
frequency coverage and tracking adjustments should be finally done
by the trimmer capacitors.
frequency coverage and tracking adjustments should be finally done
by the trimmer capacitors.
speaker terminal
set
16
Ω
level meter
(range: 0.5–5 V ac)
(range: 0.5–5 V ac)
Adjustment Location: See page 8.
8
ICF-C411
Adjustment Location:
T1
RV1
S1
BAND
SP1
L2
L1
L3
L4
FM
AM
CV1
TUNING
SP1
(SPEAKER)
CT3
CT2
CT4
CT1
CT4, L4
AM
FREQUENCY
COVERAGE
ADJUSTMENT
CT3, L3
FM
FREQUENCY
COVERAGE
ADJUSTMENT
FM
LEAD WIRE
ANTENNA
CT1, L1
AM
TRACKING
ADJUSTMENT
T1
AM
IF
ADJUSTMENT
CT2, L2
FM
TRACKING
ADJUSTMENT
– MAIN board (component side) –
Click on the first or last page to see other ICF-C411 service manuals if exist.