Sony ICF-C111 Service Manual ▷ View online
3
ICF-C111
SECTION 1
SERVICING NOTES
1-1. CORD DRESSING
(POWER CORD)
1) Connect the power cord as shown in the figure.
2) Mount the chassis with screws (P 3
2) Mount the chassis with screws (P 3
× 10).
Note: Tighten completely the screws (P 3
× 10).
1-2. POINTER ALIGNMENT
cabinet (lower)
screw (P 3x10)
pwb, power cord retainer
power cord
1
Turn this in the arrow direction
until stopped.
until stopped.
3
Fit the protrusion on the
pointer in the hole A.
pointer in the hole A.
4
Align the notch on the boss
of the knob (turning) with
the direction of CV1.
of the knob (turning) with
the direction of CV1.
5
MAIN board
knob (tuning)
chassis section
2
Fit the pointer in the groove.
A
4
ICF-C111
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
5
ICF-C111
• The equipment can be removed using the following procedure.
SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
3-1. PANEL (FRONT)
Set
Panel (Front)
Cabinet (Upper) Assy
Chassis Section
Main Board
1
screws (P 3x10)
claw
claw
claw
claws
2
panel (front)
6
ICF-C111
3-2. CABINET (UPPER) ASSY
3-3. CHASSIS SECTION
1
screws (P 3x30)
3
cabinet (upper) assy
2
screws (P 3x30)
2
screw (P 3x10)
3
chassis section
1
CN701
from MAIN board
from speaker