Sony ICD-SX20 / ICD-SX30 / ICD-SX40 Service Manual ▷ View online
5
ICD-SX20/SX30/SX40
2-2. CASE BLOCK ASSY
2
connector
(CN7005)
1
Slide the chassis from the case until the connector becomes visible.
3
Remove the chassis by entirely sliding
it out from the case assembly.
When re-assembling, pass the flexible board
through the hole as shown.
through the hole as shown.
6
ICD-SX20/SX30/SX40
2-3. ORNAMENTAL BELT BLOCK ASSY, SW BOARD
2
Remove the ornamental belt
in the direction of the arrow.
1
Remove the button (hold)
claws
3
Remove the SW board while disengaging the six claws with care.
7
ICD-SX20/SX30/SX40
2-4. AUDIO BOARD, MICROPHONE UNIT (MIC2/3)
3
holder (LCD)
4
liquid crystal display panel
5
Remove the two solderings
8
AUDIO board
7
microphone unit
(MIC2/3)
three claws
1
connector
(CN7201)
6
connector
(CN3001)
2
2-5. COVER (CHASSIS) BLOCK ASSY
1
Cover (chassis)
(Remove the cover while disengaging the four claws with care.)
claw
claw
claw
claw
chassis section
2
speaker (1.5cm) (SP3001)
8
ICD-SX20/SX30/SX40
2-6. MAIN BOARD, LIQUID CRYSTAL DISPLAY PANEL
7
MAIN board
3
Remove the
two solderings
4
battery terminal (+) assy
5
battery terminal (-) assy
2
chassis
cap (terminal)
1
Remove the battery terminal from
the groove of the chassis block.
6
liquid crystal display panel
Click on the first or last page to see other ICD-SX20 / ICD-SX30 / ICD-SX40 service manuals if exist.