Sony ICD-P210RS Service Manual ▷ View online
5
ICD-P210RS
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
Note:
Follow the disassembly procedure in the numerical order given.
3-1. CASE (FRONT) ASSY
3-1. CASE (FRONT) ASSY
(Page 5)
3-2. SW BOARD, MAIN BOARD
(Page 6)
SET
3-3. AUDIO BOARD
(Page 6)
1
battery case lid
2
screw
3
screw
4
claw
5
two claws
6
two claws
7
case (front) assy
6
ICD-P210RS
3-2. SW BOARD, MAIN BOARD
3-3. AUDIO BOARD
2
SW board
6
MAIN board
4
lid (connector)
1
CN705
5
CN701
3
S701
0
AUDIO board
S702
1
screw
2
speaker
3
4
6
8
9
5
claw
7
claw
7
ICD-P210RS
4-1. SETTING METHOD OF THE SERVICE MODE
To enter the service mode, turn on the HOLD switch while pressing the x STOP key and VOL – key at the same time with the power on.
4-2. EXITING METHOD OF THE SERVICE MODE
Exit the service mode by turning off the power.
4-3. CONTROL OPERATIONS AND DISPLAYS
4-3-1. Layers
The service mode has a maximum of three layers according to the mode items:
Layer for item selection
Layer for operation selection
Layer for operating state or test result display
To switch to another layer in a certain layer, basically Bx key switches to another layer and x STOP key returns to the previous layer.
To select the next item/operation in a layer, the > key is used. To select the previous item/operation, the . key is used. When the items
are circulated by selecting them, the first item is displayed.
Layer for item selection
Layer for operation selection
Layer for operating state or test result display
To switch to another layer in a certain layer, basically Bx key switches to another layer and x STOP key returns to the previous layer.
To select the next item/operation in a layer, the > key is used. To select the previous item/operation, the . key is used. When the items
are circulated by selecting them, the first item is displayed.
B
.02
01
E
P20
Destination
information
information
Model
information
information
CPU FW information
In this case, B1.02.
In this case, B1.02.
SECTION 4
SERVICE MODE
8
ICD-P210RS
10. USB
11. KEY Proof-Test
12. MENU Resetting
Set Specification
MENU
B
LCD
A U d I O
.02
01
E
P20
SLEEP BEEP RTC
KEY
USB
KEY
COUNT
MENU
BATT
LED
>
.
>
.
>
.
>
.
>
.
>
.
>
.
>
.
>
.
>
.
>
.
>
.
>
.
1. Set Specification
4. SLEEP
7. A/D KEY Voltage
8. BATTERY Voltage
9. LED Lighting
5. BEEP Sounding
6. RTC Connection and Operation
2. LCD
3. AUDIO Block Operation
4-3-2. Control Operations for Item Selection
These control operations are used to select the following items.
However, “Set Specification” has no more layers since all is displayed in the layer.
However, “Set Specification” has no more layers since all is displayed in the layer.
Click on the first or last page to see other ICD-P210RS service manuals if exist.