DOWNLOAD Sony ICD-BX112 Service Manual ↓ Size: 957.02 KB | Pages: 36 in PDF or view online for FREE

5-5.  Batt AD, DCIN
The current AD value (hexadecimal) of BATT_AD is indicated 
and whether DCIN is present or not is displayed. When DCIN is 
present, BATT_AD is not read. (

>

 displayed)

--

BATT_AD AD value

DPC

:8RTT :OC

DPC

:8RTT :OC

DCIN with/without information

B 

ENTER

x

80

m H

m H

To exit from this test mode, get back to the menu screen by press-
ing [

x

] button.

5-6.  RTC Test
One second update interrupt is set for the RTC. When an interrupt 
occurs, “OK” is displayed. If no interrupt occurs after an elapse of 
three seconds, “NG” is displayed.

“OK”

OK

DPC

RTC

DPC

RTC

“NG”

NG

DPC

RTC

B 

ENTER

x

m H

m H

m H

To exit from this test mode, get back to the menu screen by press-
ing [

x

] button.

5-7.  Battery Life
This mode provides only the display mode designed to indicate the 
previous measurement results.
Only this mode provides the measurement mode to record and play 
back automatically until the low battery is reached and to write a 
log at the end of operation.

•  Display Mode
The mode of operation (record and playback), the recording mode, 
and the date (year, month and day) and time of start and end of 
operation are indicated on the display screen.

:BATLIFE

DPC

End

DPC

123456

ST

DPC

080101

B 

ENTER

x

m H

m H

m H

Y

M

D

H

M

S

REC

REC

REC

mode

days

start

PLAY

end

times

To exit from this test mode, get back to the menu screen by press-
ing the [

x

] button.

5-8.  Sleep Test
“Sleep mode” includes two different mode: “Sleep mode” and 
“Deep sleep mode”. When each mode is selected, pressing the 
[

N 

ENTER] button causes a transfer to the assumed sleep mode.

Sleep Mode

Deep Sleep Mode

01

DPC

DPC

B 

ENTER

B 

ENTER

B 

ENTER

x

03

12:34

DPC

D SLEEP

N SLEEP

SLEEP

u

> 

+

-

 

.

m H

m H

m H

SHQ

m H

A

To exit from this test mode, get back to the menu screen by press-
ing the [

x

] button.

To exit from each mode, be sure to remove the power. That is, 
release the set from the test mode. Although operating the but-
tons and switches causes a transfer to the normal mode, there is no 
guarantee for proper operation.

Note: Once this mode is completed, the contents recorded by the user will 

be all cleared and initialized.

 

  Before executing this mode, see confi rmation as to clearing of the 

contents and take care of executing the mode.

When all the buttons and switches have been operated, “ACCESS” 
is displayed. Initialization (all items cleared in all folders, menu 
initialized, and title number initialized) is performed. When all has 
been completed, “OK” is displayed. If the initialization is failed, 
you see “----” displayed and the orange lamp fl ashing on and off 
fast. The buttons and switches may be turned on and off in any 
order. These 13 controls should be operated. When each control 
is operated. The WAKE UP factor is checked before displaying. If 
there are any buttons yet to be pressed, they are in key accept state.

DPC

KEY

DIVIDE

MENU

ACCESS

oK

--------

B 

ENTER

DIVIDE

/     MENU

OK

NG

Operate all the controls.

Initialization
complete

Initialization
failed

m H

To exit from each mode, be sure to remove the power. That is, 
release the set from test mode.

5-10. Key Count
This mode is mainly used for key duration test. Upon entry into 
this mode, a 5-digit counter is displayed. The counter is increment 
each time one of the buttons and switches is operated once. The 
digits indicate “00000” to “99999”. “00000” is redisplayed after 
“99999”.

DPC

COUNT

00000

B 

ENTER

m H

To exit from each mode, be sure to remove the power. That is, 
release the set from the test mode.