Sony ICD-BM1 / ICD-BM1PRO Service Manual ▷ View online
9
ICD-BM1/BM1PRO
Other Functions
47
GB
Formatting a “Memory Stick“
You can format a “Memory Stick“ using the Memory Stick IC Recorder.
Formatting will delete all data recorded in the “Memory Stick“ including
images and other data. Before formatting, check the data in the “Memory
Stick“.
Because a commercially available “Memory Stick“ has already been
formatted at the factory, you do not need to format a “Memory Stick“
before the first use.
The supplied “Memory Stick“ has also already been formatted.
Formatting will delete all data recorded in the “Memory Stick“ including
images and other data. Before formatting, check the data in the “Memory
Stick“.
Because a commercially available “Memory Stick“ has already been
formatted at the factory, you do not need to format a “Memory Stick“
before the first use.
The supplied “Memory Stick“ has also already been formatted.
1
Press MENU.
The menu mode will be displayed.
2
Press the jog lever up or down (>/
.
.
) to select “FORMAT”.
3
Press ENTER.
The formatting window will be displayed.
4
Press the jog lever up or down (>/
.
.
) to select "YES".
Jog lever (>/.)
MENU
ENTER
CANCEL
Continued
48
GB
Formatting a “Memory Stick“ (continued)
5
Press ENTER.
“OK?” will be displayed in the display
window.
window.
6
Press ENTER again.
Formatting starts.
“FORMATTING” will be displayed on the
display.
After formatting, the display in step 2 will
appear in the display window.
“FORMATTING” will be displayed on the
display.
After formatting, the display in step 2 will
appear in the display window.
7
Press MENU to exit the menu mode.
The window will return to the normal display.
After formatting, three folders are automatically made in the “Memory
Stick“ (This is the same after inserting a “Memory Stick“ for the first
time.)
Stick“ (This is the same after inserting a “Memory Stick“ for the first
time.)
To cancel formatting
Select “NO“ in the step 4 or press CANCEL while “OK ?“ is displayed in
step 5.
step 5.
Note
You cannot format when the write-protect switch on the “Memory Stick“ is set
to “LOCK”.
10
ICD-BM1/BM1PRO
Note : This set can be disassemble according to the following sequence.
SECTION 2
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
2-1. KNOB (REAR)
2-1.
KNOB (REAR)
(Page 10)
(Page 10)
2-2.
CHASSIS BLOCK ASSY
(Page 11)
(Page 11)
SET
2-3.
SW BOARD
(Page 11)
(Page 11)
2-4.
PLATE (MS) SECTION
(Page 12)
(Page 12)
2-5.
LCD BOARD
(Page 12)
(Page 12)
2-6.
CHASSIS SECTION
(Page 13)
(Page 13)
2-7.
MEMORY STICK CONNECTOR
(Page 13)
(Page 13)
2-8.
MAIN BOARD
(Page 14)
(Page 14)
5
precision pan screw
(M1.4) (EG)
6
precision pan screw
(M1.4) (EG)
2
two knobs (rear)
3
pullout the lid connector.
4
lid (connector)
1
1
Ver. 1.1
11
ICD-BM1/BM1PRO
2-2. CHASSIS BLOCK ASSY
2-3. SW BOARD
3
two screws
(1.4)
1
Open the shutter(MS).
(broken the switch.)
5
chassis block assy
4
2
Push the attachment (battery lid)
about 5mm.
4
screw
(1.4
×
3)
8
screw
(1.4
×
3)
9
screw
(1.4
×
3)
3
CN951
0
SW board
1
two claws
5
two claws
qa
ornament block assy
7
6
two claws
2
ornament (MIC)
Ver. 1.1
12
ICD-BM1/BM1PRO
2-4. PLATE (MS) SECTION
2-5. LCD BOARD
3
screw
(1.4
×
3)
2
precision pan screw
(M1.4) (EG)
1
MIC301
4
claw
6
plate (MS) section
5
claw
1
screw
(self tap)
4
2
claw
7
two claws
8
two claws
9
holder (LCD)
qa
EL901
qs
LCD board
0
LCD901
3
CN902
5
CN903
6
CN901
Ver. 1.1
Click on the first or last page to see other ICD-BM1 / ICD-BM1PRO service manuals if exist.