Sony HTR-6100 / HTR-6600 / RDR-GX300 / RDR-GX700 Service Manual ▷ View online
6-6E
6-11. Path Individual Check
(Pasted Screen Check (visual check) and
data check (digital video data auto-check) )
Screen Transition
data check (digital video data auto-check) )
Screen Transition
1)
Select the NAZCA item from the menu.
2)
The device pasted screen (top of the color bar) is displayed.
(When visual check is required, the display does not move to
the judgment screen but remains displaying the picture.)
(When visual check is required, the display does not move to
the judgment screen but remains displaying the picture.)
3)
When the “ENTER” key is pressed, the monitor display moves
to the judgment screen.
to the judgment screen.
4)
When the “RETURN” key is pressed on the judgment screen,
the monitor display moves to the menu screen.
the monitor display moves to the menu screen.
6-12. Path Individual Check
(Audio output Confirmation)
Screen Transition
Screen Transition
1)
Select the check item, ADC to Sil to DAC from the menu.
2)
The path check is executed and result of judgment is displayed.
It is O.K. when the sound comes out from the input1.
It is O.K. when the sound comes out from the input1.
3)
When the “RETURN” key is pressed on the judgment screen
again, the monitor display moves to the menu screen.
again, the monitor display moves to the menu screen.
<< PATH TEST MENU 1/2 >>
1) NAZCA
<< NAZCA >>
GRAPHICS
OK
<< OK >>
<< PATH TEST MENU 1/2 >>
1) NAZCA
· · · ·
· · · ·
The device pasted screen
(top of the color bar) is displayed.
<< PATH TEST MENU 2/2 >>
1) ADC – Sil – DAC
<< ADC t Silvia t DAC >>
AUDIO
<< ADC t Silvia t DAC >>
<< OK >>
AUDIO
OK
<< PATH TEST MENU 2/2 >>
1) ADC – Sil – DAC
T
MENU1
7-1
SECTION 7
ADJUSTMENT
RDR-GX300/GX700
7-1.
Video System Adjustment
Preparing for Adjustment
1. Equipments
• Oscilloscope
• Reference Disk
1. Equipments
• Oscilloscope
• Reference Disk
HLX-507 (PAL single layer disk) J-6090-077-A
HLX-506 (PAL dual layer disk) J-6090-078-A
HLX-506 (PAL dual layer disk) J-6090-078-A
1. Videl Levl Adjustment (RD-50 Board)
<Purpose>
This adjustment is made to satisfy the PAL standard, If it is adjusted
incorrectly, brightness will be too bright or too dark.
<Purpose>
This adjustment is made to satisfy the PAL standard, If it is adjusted
incorrectly, brightness will be too bright or too dark.
Mode
Video level adjustment in test mode
Signal
Color bars
Test point
LINE OUT (VIDEO) connector
(terminated in 75
(terminated in 75
Ω
)
Instrument
Oscilloscope
Adjusting element
RV001
Specification
1.0 Vp-p
Adjusting method:
1)
1)
Insert the reference disk and play back the 100% color bars.
2)
Adjust RV001 for 1.0 Vp-p.
Fig. 7-1.
2. S-Video Output S-Y Check
<Purpose>
This check confirms that the S-video output. If it adjusted incorrectly,
color will be to dark or too thin.
<Purpose>
This check confirms that the S-video output. If it adjusted incorrectly,
color will be to dark or too thin.
Mode
Video level adjustment in test mode
Signal
Color bars
Test point
S VIDEO OUT (S-Y) connector
(terminated in 75
(terminated in 75
Ω
)
Instrument
Oscilloscope
Specification
1.0
±
0.06Vp-p
Adjusting method:
1)
1)
Insert the reference disk and play back the 100% color bars.
2)
Confirm that the S-Y level is 1.0
±
0.06 Vp-p.
1.0
Vp-p
+ 0.04
– 0.02
Fig. 7-2.
1.0
±
0.06Vp-p
7-2E
3. S-Video Output S-C Level Check
<Purpose>
This check confirms that the S-video output S-C conforms to the
PAL standard. If it is adjusted incorrectly, color will be too dark or
too thin.
<Purpose>
This check confirms that the S-video output S-C conforms to the
PAL standard. If it is adjusted incorrectly, color will be too dark or
too thin.
Mode
Video level adjustment in test mode.
Signal
Color bars
Test point
S VIDEO OUT (S-C) connector
(terminated in 75
(terminated in 75
Ω
)
Instrument
Oscilloscope
Specification
300
±
30mVp-p
Adjustment method :
1)
1)
Insert the reference disk and play back the 100% color bars.
2)
Confirm that the burst signal level of S-C is 300
±
30 mVp-p.
Fig. 7-3.
4. Component Video Output Y Check
<Purpose>
This check confirms that the Y signal output is correct. If this signal
level is not correct, brightness of the video signal will be too bright
or too dark when the COMPONENT connector output signal is
connected to the projector having COMPONENT input.
<Purpose>
This check confirms that the Y signal output is correct. If this signal
level is not correct, brightness of the video signal will be too bright
or too dark when the COMPONENT connector output signal is
connected to the projector having COMPONENT input.
Mode
Video level adjustment in test mode
Signal
Color bars
Test point
COMPONENT VIDEO OUT (Y)
connector, D1/D2 VIDEO OUT
connector, pin-1 (terminated in 75
connector, D1/D2 VIDEO OUT
connector, pin-1 (terminated in 75
Ω
)
Instrument
Oscilloscope
Specification
1.0
±
0.06Vp-p
Adjustment method:
1)
1)
Insert the reference disk and play back the 100% color bars.
2)
Check that the Y level is 1.0
±
0.06 Vp-p.
300
±
30 mVp-p
Fig. 7-4.
5. Component Video Output B-Y Chec
<Purpose>
This check confirms that the B-Y signal of the component video
output is correct. If this signal level is not correct, color of the video
signal will have different color when the COMPONENT connector
output signal is connected to the projector having COMPONENT
input.
<Purpose>
This check confirms that the B-Y signal of the component video
output is correct. If this signal level is not correct, color of the video
signal will have different color when the COMPONENT connector
output signal is connected to the projector having COMPONENT
input.
Mode
Video level adjustment in test mode
Signal
Color bars
Test point
COMPONENT VIDEO OUT (PB/
CB) terminal (terminated in 75
CB) terminal (terminated in 75
Ω
)
Instrument
Oscilloscope
Specification
700
±
50mVp-p
Adjustment method:
1)
1)
Insert the reference disk and play back the 100% color bars.
2)
Confirm that the B-Y level is 700
±
50 mVp-p.
1.0
±
0.06Vp-p
Fig. 7-5.
6. Component Video Output R-Y Check
<Purpose>
This check confirms that the R-Y signal of the component video
output is correct. If this signal level is not correct, color of the video
signal will have different color when the COMPONENT connector
output signal is connected to the projector having COMPONENT
input.
<Purpose>
This check confirms that the R-Y signal of the component video
output is correct. If this signal level is not correct, color of the video
signal will have different color when the COMPONENT connector
output signal is connected to the projector having COMPONENT
input.
Mode
Video level adjustment in test mode
Signal
Color bars
Test point
COMPONENT VIDEO OUT (PR/
CR) connector (terminated in 75
CR) connector (terminated in 75
Ω
)
Instrument
Oscilloscope
Specification
700
±
50mVp-p
Adjustment method:
1)
1)
Insert the reference disk and play back the 100% color bars.
2)
Confirm that the R-Y level is 700
±
50 mVp-p.
700
±
50 mVp-p
700
±
50 mVp-p
Fig. 7-6.
8-1
RDR-GX300/GX700
SECTION 8
REPAIR PARTS LIST
8-1. EXPLODED VIEWS
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
NOTE:
•
•
-XX, -X mean standardized parts, so they may
have some differences from the original one.
have some differences from the original one.
•
Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
•
The mechanical parts with no reference number
in the exploded views are not supplied.
in the exploded views are not supplied.
8-1-1. OVERALL SECTION
1
X-3953-838-1 COVER (1250) ASSY, TRAY (GX700)
1
X-3954-016-1 COVER (1250) ASSY, TRAY (GX700)
1
X-2021-327-1 COVER ASSY, TRAY
(GX300 AEP:SILVER/GX300:UK)
1
X-2021-328-1 COVER ASSY, TRAY (GX300 AEP:BLACK)
1
X-2021-259-1 COVER ASSY, TRAY (REUSE)
(GX300 AEP:SILVER/GX300:UK)
1
X-2021-260-1 COVER ASSY, TRAY (REUSE) (GX300 AEP:BLACK)
3
3-086-772-01 SPRING (1250), DOOR (GX700)
4
X-2021-158-1 PANEL ASSY, FRONT(GX700 :AEP)
4
X-2021-181-A PANEL ASSY, FRONT(GX700 :UK)
4
A-1055-897-A PANEL BLOCK ASSY, FRONT (GX300 AEP:SILVER)
4
A-1055-898-A PANEL BLOCK ASSY, FRONT (GX300 UK)
4
A-1055-899-A PANEL BLOCK ASSY, FRONT (GX300 AEP:BLACK)
5
3-070-883-21 SCREW, TAPPING (GX700)
5
3-077-883-31 SCREW, TAPPING (GX300 AEP:BLACK)
5
3-070-883-41 SCREW, TAPPING (GX300 AEP:SILVER/GX300:UK)
6
2-023-274-31 CASE, TOP (GX300 AEP:SILVER/GX300:UK)
6
2-023-274-41 CASE, TOP (GX300 AEP:BLACK)
O 8
A-1056-829-A RD-50 (ES) COMPL (GX700)
O 8
A-1057-268-A RD-50 (EB) COMPL (GX300)
8
A-1070-807-A RD-50 (ESKS) COMPL (REUSE) (GX700:UK)
8
A-1070-808-A RD-50 (ESCS) COMPL (REUSE) (GX700:AEP)
8
A-1070-810-A RD-50 (EBKS) COMPL (REUSE) (GX700:UK)
8
A-1070-811-A RD-50 (EBCS) COMPL (REUSE) (GX300:AEP)
9
3-077-331-01 +BV3 (3-CR)
11
1-827-794-11 CABLE, FLEXIBLE FLAT (FRA-6)
12
1-829-256-11 CABLE, FLEXIBLE FLAT (FRA-5)
13
1-829-221-11 CABLE, FLEXIBLE FLAT (FRA-7)
14
1-478-724-11 REMOTE COMMANDER (RMT-D208P) (GX700)
14
1-478-722-21 REMOTE COMMANDER (RMT-D205P) (GX300)
15
3-071-119-91 COVER,BATTERY
17
3-087-256-31 DOOR(RW2),SLIDE (GX300)(FOR RMT-D205P)
17
3-087-256-51 DOOR(RW2),SLIDE(GX700)(FOR RMT-D208P)
18
4-921-277-11 SCREW (B2.6X8),TAPPING.BIND (GX300)
18
7-685-533-19 SCREW +BTP 2.6X6 TYPE2 N-S (GX700)
19
A-1061-580-A CASE ASSY,UPPER (SERVICE)(GX700)
19
A-1061-576-A CASE ASSY,UPPER (SERVICE)
(GX300:SILVER/GX300:UK)
19
A-1061-578-A CASE ASSY,UPPER (SERVICE)(GX300:BLACK)
20
3-066-225-01 SONY BADGE (A-5) (GX300 AEP:BLACK)
20
3-066-225-11 SONY BADGE (A-5)
(GX300 AEP:SILVER/GX300:UK)
21
3-086-771-01 DOOR (H-IN) (GX700)
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
B
C
D
E
C
B
D
E
not
supplied
supplied
not
supplied
supplied
3
18
4
1
13
11
12
6
5
7
5
9
8
9
not
supplied
supplied
not supplied
15
14
17
DVD drive
(See page 8-2),
Chassis block
(See page 8-3)
(See page 8-2),
Chassis block
(See page 8-3)
Click on the first or last page to see other HTR-6100 / HTR-6600 / RDR-GX300 / RDR-GX700 service manuals if exist.