Sony HTP-78SS / HT-SF1100 / HT-SS1100 / STR-KS1100 Service Manual ▷ View online
SERVICE MANUAL
MULTI CHANNEL AV RECEIVER
AEP Model
UK Model
STR-KS1100
•
STR-KS1100 is the receiver section in HT-SF1100/SS1100/HTP-78SS.
Ver. 1.2 2007.07
9-887-590-03
2007G05-1
© 2007.07
© 2007.07
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
Published by Sony Techno Create Corporation
– Continued on next page –
SPECIFICATIONS
Amplifier section
HT-SF1100 only
Power Output
1)
Stereo mode (rated) 70 W + 70 W
(4 ohms at 1 kHz,
THD 1%)
Surround mode (reference)
RMS Output
FRONT
2)
: 143 W/ch
(With SS-MSP2000)
CENTER
2)
: 143 W
(With SS-CNP2000)
SUR
2)
: 143 W/ch
(With SS-SRP2000)
SUBWOOFER
2)
: 285 W
(With SS-WP2000)
HT-SS1100 only
Power Output
1)
Stereo mode (rated) 70 W + 70 W
(4 ohms at 1 kHz,
THD 1%)
Surround mode (reference)
RMS Output
FRONT
2)
: 143 W/ch
(With SS-MSP1100)
CENTER
2)
: 143 W
(With SS-CNP1100)
SUR
2)
: 143 W/ch
(With SS-SRP1100)
SUBWOOFER
2)
: 285 W
(With SS-WP1100)
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
speakers and subwoofer. Depending on the sound
field settings and the source, there may be no
sound output.
speakers and subwoofer. Depending on the sound
field settings and the source, there may be no
sound output.
Inputs
Analog
Sensitivity: 1 V/50 kohms
Digital
(Coaxial)
Impedance: 75 ohms
Tone
Gain levels
±
6 dB, 1 dB step
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code CEL, CEK
With 9-kHz tuning scale:
531 – 1,602 kHz
Antenna
Loop antenna
Intermediate frequency
450 kHz
Area code
Power requirements
CEL, CEK
230 V AC, 50 Hz
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
*
Logic Surround and the DTS** Digital Surround
System.
*
Manufactured under license from Dolby
Laboratories.
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol
are trademarks of Dolby Laboratories.
are trademarks of Dolby Laboratories.
**“DTS” and “DTS Digital Surround” are
registered trademarks of DTS, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI
Multimedia Interface (HDMI
TM
) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
2
STR-KS1100
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE
WITH MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
TABLE OF CONTENTS
1.
GENERAL
...................................................................
3
2.
DISASSEMBLY
2-1.
Disassembly Flow ...........................................................
5
2-2.
Case (SL07) .....................................................................
5
2-3.
Front Panel Assy ..............................................................
6
2-4.
HDMI Board ....................................................................
6
2-5.
MAIN Board ....................................................................
7
3.
TEST MODE
..............................................................
8
4.
DIAGRAMS
4-1.
Block Diagram – MAIN Section – .................................
9
4-2.
Block Diagram – AMP Section – ................................... 10
4-3.
Block Diagram – HDMI Section – ................................. 11
4-4.
Block Diagram
– PANEL/POWER SUPPLY Section – ........................... 12
– PANEL/POWER SUPPLY Section – ........................... 12
4-5.
Schematic Diagram – I/O Board – ................................. 15
4-6.
Printed Wiring Board
– I/O Board (Component Side) – ................................... 16
– I/O Board (Component Side) – ................................... 16
4-7.
Printed Wiring Board
– I/O Board (Conductor Side) – ...................................... 17
– I/O Board (Conductor Side) – ...................................... 17
4-8.
Printed Wiring Board
– MAIN Board (Component Side) – ............................... 18
– MAIN Board (Component Side) – ............................... 18
4-9.
Printed Wiring Board
– MAIN Board (Conductor Side) – ................................. 19
– MAIN Board (Conductor Side) – ................................. 19
4-10. Schematic Diagram – MAIN Board (1/8) – ................... 20
4-11. Schematic Diagram – MAIN Board (2/8) – ................... 21
4-12. Schematic Diagram – MAIN Board (3/8) – ................... 22
4-13. Schematic Diagram – MAIN Board (4/8) – ................... 23
4-14. Schematic Diagram – MAIN Board (5/8) – ................... 24
4-15. Schematic Diagram – MAIN Board (6/8) – ................... 25
4-16. Schematic Diagram – MAIN Board (7/8) – ................... 26
4-17. Schematic Diagram – MAIN Board (8/8) – ................... 27
4-18. Printed Wiring Boards – DCAC/SPEAKER Boards – ... 28
4-19. Schematic Diagram – DCAC/SPEAKER Boards – ....... 29
4-20. Printed Wiring Board – HDMI Board – ......................... 30
4-21. Schematic Diagram – HDMI Board – ............................ 31
4-22. Printed Wiring Boards – PANEL Section – .................... 32
4-23. Schematic Diagram – PANEL Section – ........................ 33
4-11. Schematic Diagram – MAIN Board (2/8) – ................... 21
4-12. Schematic Diagram – MAIN Board (3/8) – ................... 22
4-13. Schematic Diagram – MAIN Board (4/8) – ................... 23
4-14. Schematic Diagram – MAIN Board (5/8) – ................... 24
4-15. Schematic Diagram – MAIN Board (6/8) – ................... 25
4-16. Schematic Diagram – MAIN Board (7/8) – ................... 26
4-17. Schematic Diagram – MAIN Board (8/8) – ................... 27
4-18. Printed Wiring Boards – DCAC/SPEAKER Boards – ... 28
4-19. Schematic Diagram – DCAC/SPEAKER Boards – ....... 29
4-20. Printed Wiring Board – HDMI Board – ......................... 30
4-21. Schematic Diagram – HDMI Board – ............................ 31
4-22. Printed Wiring Boards – PANEL Section – .................... 32
4-23. Schematic Diagram – PANEL Section – ........................ 33
5.
EXPLODED VIEWS
5-1.
Overall Section ................................................................ 49
5-2.
MAIN Section ................................................................. 50
6.
ELECTRICAL PARTS LIST
................................ 51
General
Power requirements
Power output (DIGITAL MEDIA PORT)
DC OUT:
5 V, 700 mA
Power consumption
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
430
×
66.5
×
335 mm
including projecting parts
and controls
and controls
Mass (Approx.)
3.6 kg
Area code
Power requirements
CEL, CEK
230 V AC, 50/60 Hz
Area code
Power consumption
CEL, CEK
110 W
Design and specifications are subject to
change without notice.
change without notice.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•
Unleaded solder melts at a temperature about 40 ˚C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
•
Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
Notes on chip component replacement
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be
damaged by heat.
3
STR-KS1100
SECTION 1
GENERAL
This section is extracted from
instruction manual.
instruction manual.
Description and location of parts
Front panel
Getting Started
Receiver
DMPORT
VIDEO 1
VIDEO 2/BD
DVD
SAT
TV
SA-CD/CD
TUNER
MASTER VOLUME
AUTO CAL MIC
INPUT SELECTOR
PRESET TUNING
SOUND FIELD
MUTING
?/1
2
4
3
1
5
6
7
q;
8
9
Name
Function
A ?
/
1
(on/standby)
Press to turn the receiver
on or off.
on or off.
B
Remote sensor
Receives signals from
remote commander.
remote commander.
C
Input lamps
The lamp of the chosen
input source lights up.
input source lights up.
D
Display
The current status of the
selected component or a
list of selectable items
appears here.
selected component or a
list of selectable items
appears here.
E
MASTER
VOLUME
VOLUME
Turn to adjust the volume
level of all speakers at the
same time.
level of all speakers at the
same time.
F
AUTO CAL MIC
jack
jack
Connects to the supplied
optimizer microphone for
the Auto Calibration
function.
optimizer microphone for
the Auto Calibration
function.
Name
Function
G
MUTING
Press to mute the sound.
H
SOUND FIELD
+/–
Press to select a sound
field.
field.
I
PRESET TUNING
+/–
+/–
Press to select a preset
station.
station.
J
INPUT
SELECTOR
SELECTOR
Press to select the input
source to playback.
source to playback.
About the indicators on the display
L
C
R
SL
SR
SW
D.RANGE
RDS
ST MONO
MEMORY
S
DIGITAL
DTS
HDMI
PL
OPT COAX
2
1
3
4
5
6
7
8
9
q;
qa
qs
qd
qf
SLEEP
LFE
Name
Function
A
LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
B
SLEEP
Lights up when the sleep timer is
activated.
activated.
C
Playback
channel
indicators
channel
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.) indicate
the channels being played back.
The boxes around the letters vary
to show how the receiver
downmixes the source sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
the channels being played back.
The boxes around the letters vary
to show how the receiver
downmixes the source sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
D ;
DIGITAL
Lights up when receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections.
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections.
E
HDMI
Lights up when a playback
component is connected to this
receiver using a HDMI jack.
component is connected to this
receiver using a HDMI jack.
L
C
R
SL
SR
SW
Name
Function
F
Preset
station
indicators
station
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations.
receiver to tune in radio stations
you have preset. For details on
presetting radio stations.
G
D.RANGE
Lights up when dynamic range
compression is activated.
compression is activated.
H
Tuner
indicators
indicators
Lights up when using the
receiver to tune in radio stations,
etc.
Note
“RDS” lights up for models of
area code CEL, CEK only.
receiver to tune in radio stations,
etc.
Note
“RDS” lights up for models of
area code CEL, CEK only.
I
MEMORY
Lights up when a memory
function, such as Preset Memory,
etc., is activated.
function, such as Preset Memory,
etc., is activated.
J
COAX
Lights up when the DVD input is
selected.
selected.
K
OPT
Lights up when the VIDEO 2
input is selected.
input is selected.
L ;
PL(
II
)
“; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“; PLII” lights up when the
Pro Logic II Movie/Music
decoder is activated.
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“; PLII” lights up when the
Pro Logic II Movie/Music
decoder is activated.
M
DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections.
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections.
N
SW
Lights up when the audio signal
is output from the
SUBWOOFER jack.
is output from the
SUBWOOFER jack.
Rear panel
1
2
3
4
OPT IN
SAT
OPT IN
VIDEO 2/BD
COAX IN
AUDIO IN
DVD
DVD IN
VIDEO 2/BD IN
OUT
ANTENNA
SA-CD/CD
AUDIO IN
TV
AUDIO IN
FRONT R
SUR L
CENTER SUBWOOFER
SUR R
FRONT L
VIDEO 1
DMPORT
DIGITAL
SPEAKERS
HDMI
AM
R
L
R
L
A
ANTENNA section
FM
ANTENNA
jack
jack
Connects to the FM
wire antenna
supplied with this
receiver.
wire antenna
supplied with this
receiver.
AM
ANTENNA
terminals
ANTENNA
terminals
Connects to the AM
loop antenna
supplied with this
receiver.
loop antenna
supplied with this
receiver.
B
DIGITAL INPUT/OUTPUT section
OPTICAL IN
jack
jack
Connects to a DVD
player, etc. The
COAX IN jack
provides a better
quality of loud sound.
player, etc. The
COAX IN jack
provides a better
quality of loud sound.
COAXIAL IN
jack
jack
HDMI IN/
OUT jack
OUT jack
Connects to a DVD
player or a satellite
tuner. An image and
the sound are output
to a TV or a projector.
player or a satellite
tuner. An image and
the sound are output
to a TV or a projector.
DMPORT
jack
Connect to a
DIGITAL MEDIA
PORT adapter.
DIGITAL MEDIA
PORT adapter.
C
SPEAKERS section
Connects to speakers.
D
AUDIO INPUT section
AUDIO IN
jack
jack
Connects to a Super
Audio CD player,
CD player, etc.
Audio CD player,
CD player, etc.
White (L)
Red (R)
4
STR-KS1100
You can operate the receiver with the supplied
remote. You can also use the remote to control
the Sony audio/video components that the
remote is assigned to operate.
remote. You can also use the remote to control
the Sony audio/video components that the
remote is assigned to operate.
RM-AAU017
Remote commander
1
2
3
4
6
7
8
0/10
ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP
DMPORT
TV
?/1
AV
?/1
VIDEO 1
VIDEO 2
VIDEO 3
DVD
2CH
A.F.D.
RETURN/EXIT
TV CH ñ
PRESET ñ
TV CH +
PRESET +
TUNING ñ
TV
TUNING +
REPLAY ADVANCE
MENU
MOVIE
MUSIC
MEMORY DVD MENU
FM MODE
CLEAR
TOOLS
DISPLAY
MUTING
TV VOL
MASTER VOL
AUTO CAL
D.TUNING
D.SKIP
AMP MENU
SAT
TV
SA-CD/CD TUNER
?/1
-
F
G
g
f
.
H
m
M
X
x
<
<
>
5
>10/
qg
qj
qk
qh
qf
ql
w;
wa
qd
1
3
2
5
6
7
8
q;
qs
qa
4
9
Name
Function
A
TV
?
/
1
(on/standby)
Press TV ?/1 and TV (M) at
the same time to turn the TV on
or off.
the same time to turn the TV on
or off.
AV
?
/
1
(on/standby)
Press to turn on or off the Sony
audio/video components that
the remote is assigned to
operate.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
audio/video components that
the remote is assigned to
operate.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
B ?
/
1
(on/standby)
Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C
Input
buttons
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components as follows. You
can change the button
assignment following the steps
in “Changing button
assignments”.
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components as follows. You
can change the button
assignment following the steps
in “Changing button
assignments”.
Button
Assigned Sony
component
component
VIDEO 1
VCR (VTR mode 3)
VIDEO 2
VCR (VTR mode 2)
VIDEO 3
Not assigned
DVD
DVD player
SAT
Digital Satellite
Receiver
Receiver
TV
TV
SA-CD/CD
Super Audio CD/
CD player
TUNER
Built-in tuner
DMPORT
DIGITAL MEDIA
PORT adapter
PORT adapter
Name
Function
D
MOVIE
Press to select sound fields
(MOVIE).
(MOVIE).
MUSIC
Press to select sound fields
(MUSIC).
(MUSIC).
A.F.D.
Press to select A.F.D. mode.
2CH
Press to select 2CH STEREO
mode.
mode.
E
AMP MENU
Press to display the menu of
the receiver. Then, use V, v,
B, b and
the receiver. Then, use V, v,
B, b and
(P) to perform
menu operations.
F
AUTO CAL
Press to activate the Auto
Calibration function.
Calibration function.
G
D.TUNING
Press to enter direct tuning
mode.
mode.
D.SKIP
Press to skip a disc when
using a multi-disc changer.
using a multi-disc changer.
H
DVD MENU
Press to display the menu of
the DVD player on the TV
screen. Then, use V, v, B, b
and
the DVD player on the TV
screen. Then, use V, v, B, b
and
(P) to perform menu
operations.
FM MODE
Press to select the FM
monaural or stereo reception.
monaural or stereo reception.
I
ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric
buttons of the TV, VCR or
satellite tuner.
selecting a channel, disc or
track using the numeric
buttons of the TV, VCR or
satellite tuner.
MEMORY
Press to store a station.
J
MUTING
Press to activate the muting
function.
Press MUTING and TV (M)
at the same time to activate
the TV’s muting function.
function.
Press MUTING and TV (M)
at the same time to activate
the TV’s muting function.
K
TV VOL
+
a)
/–
Press TV VOL +/– and TV
(M) at the same time to adjust
the TV volume level.
(M) at the same time to adjust
the TV volume level.
MASTER
VOL +
a)
/–
Press to adjust the volume
level of all speakers at the
same time.
level of all speakers at the
same time.
Name
Function
L
TV CH +/–
Press TV CH +/– and TV (M)
at the same time to select
preset TV channels.
at the same time to select
preset TV channels.
PRESET +/–
Press to select
– preset stations.
– preset channels of the VCR
– preset stations.
– preset channels of the VCR
or satellite tuner.
.
/
>
b)
Press to skip a track of the CD
player, DVD player or Blu-
ray disc player.
player, DVD player or Blu-
ray disc player.
REPLAY /
ADVANCE
ADVANCE
Press to replay the previous
scene or fast forward the
current scene of the VCR,
DVD player or Blu-ray disc
player.
scene or fast forward the
current scene of the VCR,
DVD player or Blu-ray disc
player.
m
/
M
b)
Press to
– search tracks in the forward/
– search tracks in the forward/
reverse direction of the
DVD player.
DVD player.
– start fast forward/rewind of
the VCR, CD player or Blu-
ray disc player.
ray disc player.
TUNING +/–
Press to scan a station.
H
a)b)
Press to start playback of the
VCR, CD player, DVD player
or Blu-ray disc player.
VCR, CD player, DVD player
or Blu-ray disc player.
X
b)
Press to pause playback or
recording of the VCR, CD
player, DVD player or Blu-
ray disc player. (Also starts
recording with components in
recording standby.)
recording of the VCR, CD
player, DVD player or Blu-
ray disc player. (Also starts
recording with components in
recording standby.)
x
b)
Press to stop playback of the
VCR, CD player, DVD player
or Blu-ray disc player.
VCR, CD player, DVD player
or Blu-ray disc player.
M
TV
Press TV and the button you
want at the same time to
activate the buttons with
orange printing.
want at the same time to
activate the buttons with
orange printing.
N
MENU
Press to display the menu of
the VCR, DVD player,
satellite tuner or Blu-ray disc
player on the TV screen.
Press MENU and TV (M) at
the same time to display the
TV’s menu. Then, use V, v,
B, b and
the VCR, DVD player,
satellite tuner or Blu-ray disc
player on the TV screen.
Press MENU and TV (M) at
the same time to display the
TV’s menu. Then, use V, v,
B, b and
(P) to perform
menu operations.
<
<
a)
The number 5, MASTER VOL +, TV VOL + and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
b)
This button is also available for DIGITAL MEDIA
PORT adapter operation. For details on the
function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
PORT adapter operation. For details on the
function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
Notes
The VIDEO 3 button on the remote is not available
for receiver operation.
Some functions explained in this section may not
work depending on the model.
The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
component, the above operation may not be
possible or may operate differently than described.
Name
Function
O
RETURN/
EXIT
O
Press to
ñ return to the previous menu.
ñ exit the menu while the
ñ return to the previous menu.
ñ exit the menu while the
menu or on-screen guide of
the VCR, DVD player,
satellite tuner or Blu-ray
disc player is displayed on
the TV screen.
the VCR, DVD player,
satellite tuner or Blu-ray
disc player is displayed on
the TV screen.
Press RETURN/EXIT O
and TV (M) at the same time
to return to the previous menu
or exit the TV’s menu while
the menu is displayed on the
TV screen.
and TV (M) at the same time
to return to the previous menu
or exit the TV’s menu while
the menu is displayed on the
TV screen.
P
V/v/B/b
After pressing AMP MENU
(E), DVD MENU (H), or
MENU (N), press V, v, B or
b to select the settings. Then,
press
(E), DVD MENU (H), or
MENU (N), press V, v, B or
b to select the settings. Then,
press
to enter the selection
for DVD MENU or MENU.
Press
Press
also
to enter the
selection of the receiver,
VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Q
DISPLAY
Press to select information
displayed on the TV screen of
the VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Press DISPLAY and TV (M)
at the same time to select TV
information displayed on the
TV screen.
displayed on the TV screen of
the VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Press DISPLAY and TV (M)
at the same time to select TV
information displayed on the
TV screen.
R
TOOLS
Press to display options
applicable to the entire disc
(e.g. disc protection), recorder
(e.g. audio settings during
recording), or multiple items
on a list menu (e.g. erasing
multiple titles).
Press TOOLS and TV (M) at
the same time to display
options applicable to the TV.
applicable to the entire disc
(e.g. disc protection), recorder
(e.g. audio settings during
recording), or multiple items
on a list menu (e.g. erasing
multiple titles).
Press TOOLS and TV (M) at
the same time to display
options applicable to the TV.
Name
Function
S
>10/
x
Press to select
– track numbers over 10 of the
– track numbers over 10 of the
VCR, satellite tuner or CD
player.
player.
– channel numbers of the
Digital CATV terminal.
-/--
Press -/-- and TV (M) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
same time to select the
channel entry mode, either
one or two digits of the TV.
CLEAR
Press to clear a mistake when
you press the incorrect
numeric button.
you press the incorrect
numeric button.
T
Numeric
buttons
(number 5
buttons
(number 5
a)
)
Press to
– preset/tune to preset
– preset/tune to preset
stations.
– select track numbers of the
CD player, DVD player or
Blu-ray disc player. Press
Blu-ray disc player. Press
0/10 to select track number
10.
10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (M) at the same time to
select the TV channels.
TV (M) at the same time to
select the TV channels.
U
TV INPUT
Press TV INPUT and TV (M)
at the same time to select the
input signal (TV input or
video input).
at the same time to select the
input signal (TV input or
video input).
SLEEP
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
Timer function and the
duration which the receiver
turns off automatically.