Sony HT-SL7 / HT-SL7A / STR-KSL7 / STR-SL7 / TA-KSL7 Service Manual ▷ View online
4
STR-KSL7/SL7/TA-KSL7
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
AUX 6 (18)
Cursor buttons (U/u) qh (14,
Cursor buttons (U/u) qh (14,
22–24)
Display qk (21)
DVD 3 (18)
LEVEL qj (22)
MASTER VOLUME qa (17, 18)
MULTI CH IN 8 (18)
MULTI CHANNEL DECODING
DVD 3 (18)
LEVEL qj (22)
MASTER VOLUME qa (17, 18)
MULTI CH IN 8 (18)
MULTI CHANNEL DECODING
indicator 5
MUTING qd (18)
PHONES jack ql (18)
SET UP q; (14, 24)
SOUND FIELD +/– qs (19, 23)
SURR 9 (23)
TEST TONE qf (17)
TUNER 7 (18)
TV 4 (18)
VIDEO 2 (18)
?/1 (power) 1 (13, 17, 18, 23)
+/– qg (14, 22–24)
PHONES jack ql (18)
SET UP q; (14, 24)
SOUND FIELD +/– qs (19, 23)
SURR 9 (23)
TEST TONE qf (17)
TUNER 7 (18)
TV 4 (18)
VIDEO 2 (18)
?/1 (power) 1 (13, 17, 18, 23)
+/– qg (14, 22–24)
Main unit
1
2
3 456 7
8
9
q;
qa
qs
ql
qk
qj
qf
qg
qh
qd
Parts Identification
The items are arranged in alphabetical order.
Refer to the pages indicated in parentheses ( ) for details.
5
STR-KSL7/SL7/TA-KSL7
SECTION 2
TEST MODE
FACTORY SET MODE
* All preset contents are reset to the default setting.
* Procedure:
* Procedure:
While depressing the SET UP and the SOUND FIELD – buttons
simultaneously, press the power ?/1 button to turn on the main
power. The message FACTORY appears and switch off the set.
While depressing the SET UP and the SOUND FIELD – buttons
simultaneously, press the power ?/1 button again. The message
FACTORY appears and the present contents are reset to the default
values.
simultaneously, press the power ?/1 button to turn on the main
power. The message FACTORY appears and switch off the set.
While depressing the SET UP and the SOUND FIELD – buttons
simultaneously, press the power ?/1 button again. The message
FACTORY appears and the present contents are reset to the default
values.
AM CHANNEL STEP 9 kHz/10 kHz
SELECTION MODE
SELECTION MODE
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
Set the FUNCTION to AM. Turn off the main power.
While depressing the i cursor button, press the power ?/1
button to turn on the main power. Either the message 9 k STEP or
10 k STEP appears. Select the desired step.
While depressing the i cursor button, press the power ?/1
button to turn on the main power. Either the message 9 k STEP or
10 k STEP appears. Select the desired step.
* For US/Canadian/E model only
MICRO/NORMAL SPEAKER SELECTION MODE
* Either the micro speaker mode or normal speaker mode can be
selected.
* Procedure
Press the ?/1 button while pressing the + cursor button to turn
on the power. Either the message MICRO SP. or NORM. SP.
appears. Select the derired mode.
on the power. Either the message MICRO SP. or NORM. SP.
appears. Select the derired mode.
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
completion of repair.
* Procedure:
While depressing the SOUND FIELD + button, press the power
?/1
?/1
button to turn on the main power. The message
S. F. CLR appears and initialization is performed.
DEMONSTRATION MODE
* Demonstration is performed.
* Procedure :
* Procedure :
While depressing the SET UP button, press the power ?/1
button. The message appears and demonstration is performed.
button. The message appears and demonstration is performed.
* To finish DEMONSTRATION MODE, press the power ?/1
button while the introduction message appears in the display.
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested. When this test is activated,
all segments turn on at the same time, then each segment turns on
one after another.
one after another.
* Procedure:
While depressing the SET UP and the SOUND FIELD + buttons
simultaneously, press the power ?/1 button to turn on the main
power.
simultaneously, press the power ?/1 button to turn on the main
power.
1. All segments turn on.
DVD , TV , MULTI CH IN and SURR LED turn on.
2. Press the VIDEO button, confirm display
AUX , TUNER and LEVEL LED turn on.
3. Press the VIDEO button, confirm display
MULTI CHANNEL DECODING(blue), VIDEO and SET UP
LED turn on.
LED turn on.
4. Press the VIDEO button, All segments turn off.
5. Every pressing of the VIDEO button turns on each segment and
LED one after another in the same order.
(Not only the VIDEO button, but also the other buttons such as
DVD , TV , AUX , TUNER can be used.)
(Not only the VIDEO button, but also the other buttons such as
DVD , TV , AUX , TUNER can be used.)
KEY CHECK MODE
* Button check
* Procedure:
* Procedure:
While depressing the MUTING and the ENTER buttons
simultaneously, press the power ?/1 button to turn on the main
power.
REST 17 appears.
Every pressing of any button other than ?/1 counts down the
buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed REST 00 appears.
simultaneously, press the power ?/1 button to turn on the main
power.
REST 17 appears.
Every pressing of any button other than ?/1 counts down the
buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed REST 00 appears.
SW
L
SL
C
R
S
SR
SLEEP
SP.OFF
( ( ( L F E ) ) )
DIGITAL
OPT COAX MULTI CH IN
PRO LOGIC DTS MPEGSTEREO MONO RDS
MEMORY
MUTING
INFO
NEWS
TA
EQ
D.RANGE
D D
dB
kHz
mft.
MHz
SW
L
R
S
SLEEP
L F E
COAX
PRO LOGIC
MPEGSTEREO
RDS
MUTING
INFO
TA
D.RANGE
D D
k
m
MHz
SL
C
SR
SP.OFF
( ( ( ) ) )
DIGITAL
OPT
MULTI CH IN
DTS
MONO
MEMORY
NEWS
EQ
dB
Hz
ft.
ft.
6
STR-KSL7/SL7/TA-KSL7
AUTOBETICAL MODE (TA-KSL7: AEP, UK)
* This mode is installed in the Europe models only. When this mode
is used, the receiver scans the broadcasts that can be received by
tuner, and sets up the broadcasts. Be sure to start scanning after
connecting the antenna.
Procedure:
Check that the antenna is connected. Press the ?/1 button while
pressing the ENTER button to turn on the power. The message
appears and scanning starts by tuner.
tuner, and sets up the broadcasts. Be sure to start scanning after
connecting the antenna.
Procedure:
Check that the antenna is connected. Press the ?/1 button while
pressing the ENTER button to turn on the power. The message
appears and scanning starts by tuner.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
* Procedure:
While depressing the SOUND FIELD – and the
i cursor buttons
simultaneously, press the power ?/1 button to turn on the main
power. The model name, destination and the software version are
displayed.
power. The model name, destination and the software version are
displayed.
7
7
STR-KSL7/SL7/TA-KSL7
SECTION 3
DIAGRAMS
For schematic diagrams.
Note:
Note:
• All capacitors are in
µ
F unless otherwise noted. p : pF. 50
WV or less are not indicated except for electrolytics and
tantalums.
tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
•
%
: indicates tolerance.
•
f
: internal component.
•
C
: panel designation.
•
A
: B+ Line.
•
B
: B– Line.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
No mark : FM
No mark : FM
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal produc-
tion tolerances.
tion tolerances.
• Waveforms are taken with a oscilloscope.
• Circled numbers refer to waveforms.
• Circled numbers refer to waveforms.
• Signal path.
F
: ANALOG
J
: DIGITAL
c
: DVD
• Abbreviation
CND : Canadian model
MY
MY
: Malaysia model
SP
: Singapore model
CH
: Chinese model
MX
: Mexican model
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this necessary note is printed in each block.)
(In addition to this necessary note is printed in each block.)
Note:
The components identified by
mark
mark
0
or dotted line with mark
0
are critical for safety.
Replace only with part number
specified.
specified.
Note:
Les composants identifiés par
une marque
une marque
0
sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ne les remplacer que par une
pièce portant le numéro spécifié.
C
B
These are omitted.
E
Q
B
These are omitted.
C
E
For printed wiring boards.
Note:
Note:
• X
: parts extracted from the component side.
•
a
: Through hole.
•
f
: internal component.
•
: Pattern from the side which enables seeing.
Caution:
Pattern face side:
Pattern face side:
Parts on the pattern face side seen from
(Side A)
the pattern face are indicated.
Parts face side:
Parts on the parts face side seen from
(Side B)
the parts face are indicated.
• CIRCUIT BOARDS LOCATION
• WAVEFORMS
– DIGITAL BOARD –
– MAIN BOARD –
– DISPLAY BOARD –
1
IC506
5
2
IC701
9
3
IC101
id
6Vp-p
81ns
20ns/div 2V/div
6.3Vp-p
81ns
20ns/div 2V/div
5.8Vp-p
62ns
20ns/div 2V/div
5Vp-p
1.3
µ
s
400ns/div 2V/div
4
IC306
4
5
IC309
wf
7.8Vp-p
20.3ns
10ns/div 2V/div
25.4Vp-p
9.8
µ
s
4
µ
s/div 10V/div
6
Q153 collector
HEADPHONE board
POWER SW board
MAIN board
DIGITAL board
S VIDEO board
DISPLAY board
• MAIN board consists of multiple layers.
However, only the sides (layers) A and B are shown.