Sony HT-SF1300 / HT-SS1300 / STR-KS1300 Service Manual ▷ View online
STR-KS1300
49
HDMI BOARD IC3511 SII9011CLU (HDMI RECEIVER)
Pin No.
Pin Name
I/O
Description
1
VSYNC
O
Vertical synchronize signal output for the HDMI transceiver
2 to 5
QO23 to QO20
-
Not used
6
IOGND
-
Ground terminal
7
IOVCC
-
Power supply terminal (+3.3V)
8 to 11
QO19 to QO16
-
Not used
12
CVCC18
-
Power supply terminal (+1.8V)
13
CGND
-
Ground terminal
14 to 17
QO15 to QO12
-
Not used
18
IOGND
-
Ground terminal
19
IOVCC
-
Power supply terminal (+3.3V)
20 to 23
QO11 to QO8
-
Not used
24
CVCC18
-
Power supply terminal (+1.8V)
25
CGND
-
Ground terminal
26 to 29
QO7 to QO4
-
Not used
30
IOGND
-
Ground terminal
31
IOVCC
-
Power supply terminal (+3.3V)
32 to 35
QO3 to QO0
-
Not used
36
CVCC18
-
Power supply terminal (+1.8V)
37
CGND
-
Ground terminal
38
CI2CA
-
Not used
39
CSDA
I/O
I2C two-way data bus with the HDMI controller and HDMI transceiver
40
CSCL
I
I2C clock signal input from the HDMI controller
41
DSDA
I/O
I2C two-way data bus with the level shift and data selector
42
DSDL
I
I2C clock signal input from the level shift and data selector
43
NC
-
Not used
44
PWR5V
I
Power detect signal input terminal
45
CVCC18
-
Power supply terminal (+1.8V)
46
PGND
-
Ground terminal
47
PVCC
-
Power supply terminal (+3.3V)
48
PSVD
-
Not used
49
AVCC
-
Power supply terminal (+3.3V)
50
RXC-
I
TMDS clock signal input from the HDMI input selector
51
RXC+
I
TMDS clock signal input from the HDMI input selector
52
AGND
-
Ground terminal
53
AVCC
-
Power supply terminal (+3.3V)
54
RX0-
I
TMDS data input from the HDMI input selector
55
RX0+
I
TMDS data input from the HDMI input selector
56
AGND
-
Ground terminal
57
AVCC
-
Power supply terminal (+3.3V)
58
RX1-
I
TMDS data input from the HDMI input selector
59
RX1+
I
TMDS data input from the HDMI input selector
60
AGND
-
Ground terminal
61
AVCC
-
Power supply terminal (+3.3V)
62
RX2-
I
TMDS data input from the HDMI input selector
63
RX2+
I
TMDS data input from the HDMI input selector
64, 65
AGND, DGND
-
Ground terminal
66
DVCC18
-
Power supply terminal (+1.8V)
67
MUTE
O
Audio muting signal output terminal
68
IOVCC
-
Power supply terminal (+3.3V)
69
IOGND
-
Ground terminal
70
SPDIF
O
SPDIF signal output for the digital audio interface receiver and HDMI transceiver
71 to 74
SD3 to SD0
O
Serial data output for the DSP and HDMI transceiver
75
WS
O
Word select signal output for the DSP and HDMI transceiver
76
SCK
O
Serial clock signal output for the DSP and HDMI transceiver
77
IOVCC
-
Power supply terminal (+3.3V)
STR-KS1300
50
Pin No.
Pin Name
I/O
Description
78
IOGND
-
Ground terminal
79
MCLK
O
Audio master clock signal output for the DSP and HDMI transceiver
80
CGND
-
Ground terminal
81
CVCC18
-
Power supply terminal (+1.8V)
82
AUDPVCC18
-
Power supply terminal (+1.8V)
83
AUDPGND
-
Ground terminal
84
XTALOUT
O
System clock output termnal (28.322 MHz)
85
XTALIN
I
System clock input terminal (28.322 MHz)
86
ZTALVCC
-
Power supply terminal (+3.3V)
87
REGVCC
-
Power supply terminal (+3.3V)
88
RSVDL
-
Not used
89
RESET
I
Reset signal input from the HDMI controller "L": reset
90
SCDT
-
Not used
91
INT
O
Interrupt signal output for the HDMI controller
92 to 96
QE23 to QE19
O
Serial data output for the HDMI transceiver
97
IOGND
-
Ground terminal
98
IOVCC
-
Power supply terminal (+3.3V)
99 to 105
QE18 to QE12
O
Serial data output for the HDMI transceiver
106
IOGND
-
Ground terminal
107
IOVCC
-
Power supply terminal (+3.3V)
108 to 111
QE11 to QE8
O
Serial data output for the HDMI transceiver
112
CVCC18
-
Power supply terminal (+1.8V)
113
CGND
-
Ground terminal
114 to 117
QE7 to QE4
O
Serial data output for the HDMI transceiver
118
IOGND
-
Ground terminal
119
ODCK
O
Output data clock signal output for the HDMI transceiver
120
IOVCC
-
Power supply terminal (+3.3V)
121 to 124
QE3 to QE0
O
Serial data output for the HDMI transceiver
125
CVCC18
-
Power supply terminal (+1.8V)
126
CGND
-
Ground terminal
127
DE
O
Data enable signal output for the HDMI transceiver
128
HSYNC
O
Horizontal synchronize signal output for the HDMI transceiver
STR-KS1300
51
HDMI BOARD IC3519 M30620FCPGP-RSX01 (HDMI CONTROLLER)
Pin No.
Pin Name
I/O
Description
1 to 5
NC
-
Not used
6
BYTE
-
Not used
7
CNVSS
I
Processor mode switch input terminal (for test)
8, 9
NC
-
Not used
10
RESET
I
System reset signal input from the main system controller "L": reset
11
XOUT
O
System clock output terminal (10 MHz)
12
VSS
-
Ground terminal
13
XIN
I
System clock input terminal (10 MHz)
14
VCC_3.3V
-
Power supply terminal (+3.3V)
15
NMI
-
Not used
16 to 18
NC
-
Not used
19
RX_RST
O
System reset signal output to the HDMI receiver "L": reset
20
RX_INT
I
Interrupt status input from the HDMI receiver
21
RX_HPD1
O
Hot plug connection detect signal output to the HDMI input selector
22 to 26
NC
-
Not used
27
CSCL
O
Serial data transfer clock signal output to the HDMI section
28
CSDA
I/O
Two-way data bus with the HDMI section
29
232COUT
O
Serial data output terminal for the RS-232C
30
232CIN
I
Serial data input terminal for the RS-232C
31, 32
NC
-
Not used
33
TX
I
UART data input from the system controller
34
RX
O
UART data output to the system controller
35
EEPROMSEL1
O
Write enable signal output to the EEPROM
36 to 39
NC
-
Not used
40
VDAC_RESET
-
Not used
41
TX_5VPWR
O
Power on/off control signal output terminal "H": power on
42
TX_RST
I
Interrupt status input from the HDMI transceiver
43
TX_INT
O
System reset signal output to the HDMI transceiver "L": reset
44 to 50
NC
-
Not used
51 to 53
TMDS_S1 to TMDS_S3
O
Source selection signal output to the HDMI input selector
54
TMDS_OEB
O
Output enable signal output to the HDMI input selector
55, 56
P5V_SELA, P5V_SELB
O
HDMI SAT IN, DVD IN, VEDEO 2/BD IN jack detection signal select signal output terminal
57 to 59
NC
-
Not used
60
VCC_3.3V
-
Power supply terminal (+3.3V)
61
NC
-
Not used
62
VSS
-
Ground terminal
63, 64
NC
-
Not used
65
MUTE
O
Audio muting signal output terminal
66
AD_SW
-
Not used
67
AD_INT
-
Not used
68
AD_RST
-
Not used
69
PROUT_RST
-
Not used
70
PROU_OUT_SW
-
Not used
71 to 90
NC
-
Not used
91 to 93
MODEL_SW3 to
MODEL_SW1
I
Model setting terminal
94
AVSS
-
Ground terminal
95
NC
-
Not used
96
VREF
I
Reference voltage (+3.3V) input terminal
97
AVCC
-
Power supply terminal (+3.3V)
98 to 100
NC
-
Not used
52
STR-KS1300
SECTION 7
EXPLODED VIEWS
1
3-378-435-01 CUSHION,
SARANET
2
3-701-748-00 CLAMP
3
1-457-369-11 CORD,
FERRITE
4
4-966-267-12 BUSHING
(FBS001),
CORD
0
5
1-777-071-83 CORD, POWER
9
6
A-1438-372-A HDMI BOARD, COMPLETE (for SERVICE)
7
3-070-883-71 SCREW,
TAPPING
8
2-897-876-22 CASE
(SL07)
9
1-828-349-11 WIRE (FLAT TYPE) (17 CORE)
10
3-655-653-11 BAND (TAITON), BINDING
#1
7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
R
R
Parts of Color Cabinet’s Color
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice.
vice.
Some delay should be anticipated when
ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Accessory are given in the last of the elec-
trical parts list.
7-1. CASE, HDMI BOARD SECTION
1
#1
#1
#1
#1
#1
#1
not supplied
MAIN board section
front panel section
6
7
7
8
9
2
4
5
3
10
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
The components identifi ed by mark 9 con-
tain confi dential information.
Strictly follow the instructions whenever the
components are repaired and/or replaced.
tain confi dential information.
Strictly follow the instructions whenever the
components are repaired and/or replaced.
Note: If wire (fl at type) is replaced, install it after bending
it in the same form as that before replacement.
Click on the first or last page to see other HT-SF1300 / HT-SS1300 / STR-KS1300 service manuals if exist.